diff --git a/protocol/serial_soft.c b/protocol/serial_soft.c index 3c9c914e..e8870bcd 100644 --- a/protocol/serial_soft.c +++ b/protocol/serial_soft.c @@ -43,12 +43,32 @@ POSSIBILITY OF SUCH DAMAGE. /* * Stupid Inefficient Busy-wait Software Serial - * is still useful for negative logic signal like Sun protocol not supported by hardware USART. + * which is still useful for negative logic signal like Sun protocol + * if it is not supported by hardware UART. + * + * TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed. */ -#define WAIT_US (1000000/SERIAL_BAUD) +#define WAIT_US (1000000L/SERIAL_SOFT_BAUD) + +#ifdef SERIAL_SOFT_LOGIC_NEGATIVE + #define SERIAL_SOFT_RXD_IN() !(SERIAL_SOFT_RXD_READ()) + #define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_LO() + #define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_HI() +#else + #define SERIAL_SOFT_RXD_IN() !!(SERIAL_SOFT_RXD_READ()) + #define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_HI() + #define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_LO() +#endif + +#ifdef SERIAL_SOFT_PARITY_EVEN + #define SERIAL_SOFT_PARITY_VAL 0 +#elif defined(SERIAL_SOFT_PARITY_ODD) + #define SERIAL_SOFT_PARITY_VAL 1 +#endif /* debug for signal timing, see debug pin with oscilloscope */ +#define SERIAL_SOFT_DEBUG #ifdef SERIAL_SOFT_DEBUG #define SERIAL_SOFT_DEBUG_INIT() (DDRD |= 1<<7) #define SERIAL_SOFT_DEBUG_TGL() (PORTD ^= 1<<7) @@ -62,8 +82,8 @@ void serial_init(void) { SERIAL_SOFT_DEBUG_INIT(); - SERIAL_RXD_INIT(); - SERIAL_TXD_INIT(); + SERIAL_SOFT_RXD_INIT(); + SERIAL_SOFT_TXD_INIT(); } /* RX ring buffer */ @@ -100,85 +120,98 @@ int16_t serial_recv2(void) void serial_send(uint8_t data) { /* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */ - /* start bit */ - SERIAL_TXD_OFF(); - _delay_us(WAIT_US); -#ifdef SERIAL_BIT_ORDER_MSB +#ifdef SERIAL_SOFT_BIT_ORDER_MSB uint8_t mask = 0x80; #else uint8_t mask = 0x01; #endif + + uint8_t parity = 0; + + /* start bit */ + SERIAL_SOFT_TXD_OFF(); + _delay_us(WAIT_US); + while (mask) { - if (data&mask) { SERIAL_TXD_ON(); } else { SERIAL_TXD_OFF(); } + if (data&mask) { + SERIAL_SOFT_TXD_ON(); + parity ^= 1; + } else { + SERIAL_SOFT_TXD_OFF(); + } _delay_us(WAIT_US); -#ifdef SERIAL_BIT_ORDER_MSB +#ifdef SERIAL_SOFT_BIT_ORDER_MSB mask >>= 1; #else mask <<= 1; #endif } +#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) + /* to center of parity bit */ + if (parity != SERIAL_SOFT_PARITY_VAL) { + SERIAL_SOFT_TXD_ON(); + } else { + SERIAL_SOFT_TXD_OFF(); + } + _delay_us(WAIT_US); +#endif + /* stop bit */ - SERIAL_TXD_ON(); + SERIAL_SOFT_TXD_ON(); _delay_us(WAIT_US); } /* detect edge of start bit */ -ISR(SERIAL_RXD_VECT) +ISR(SERIAL_SOFT_RXD_VECT) { - SERIAL_SOFT_DEBUG_TGL() - SERIAL_RXD_INT_ENTER() + SERIAL_SOFT_DEBUG_TGL(); + SERIAL_SOFT_RXD_INT_ENTER() uint8_t data = 0; -#ifdef SERIAL_BIT_ORDER_MSB +#ifdef SERIAL_SOFT_BIT_ORDER_MSB uint8_t mask = 0x80; #else uint8_t mask = 0x01; #endif -#ifdef SERIAL_PARITY_ODD uint8_t parity = 0; -#elif defined(SERIAL_PARITY_EVEN) - uint8_t parity = 1; -#endif /* to center of start bit */ _delay_us(WAIT_US/2); - SERIAL_SOFT_DEBUG_TGL() + SERIAL_SOFT_DEBUG_TGL(); do { /* to center of next bit */ _delay_us(WAIT_US); - SERIAL_SOFT_DEBUG_TGL() - if (SERIAL_RXD_READ()) { + SERIAL_SOFT_DEBUG_TGL(); + if (SERIAL_SOFT_RXD_IN()) { data |= mask; -#if defined(SERIAL_PARITY_EVEN) || defined(SERIAL_PARITY_ODD) parity ^= 1; -#endif } -#ifdef SERIAL_BIT_ORDER_MSB +#ifdef SERIAL_SOFT_BIT_ORDER_MSB mask >>= 1; #else mask <<= 1; #endif } while (mask); -#if defined(SERIAL_PARITY_EVEN) || defined(SERIAL_PARITY_ODD) +#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) /* to center of parity bit */ _delay_us(WAIT_US); - if (SERIAL_RXD_READ()) { parity ^= 1; } - SERIAL_SOFT_DEBUG_TGL() + if (SERIAL_SOFT_RXD_IN()) { parity ^= 1; } + SERIAL_SOFT_DEBUG_TGL(); #endif /* to center of stop bit */ _delay_us(WAIT_US); uint8_t next = (rbuf_head + 1) % RBUF_SIZE; -#if defined(SERIAL_PARITY_EVEN) || defined(SERIAL_PARITY_ODD) - if (parity && next != rbuf_tail) { +#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) + if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) { #else if (next != rbuf_tail) { #endif @@ -186,6 +219,6 @@ ISR(SERIAL_RXD_VECT) rbuf_head = next; } - SERIAL_RXD_INT_EXIT(); - SERIAL_SOFT_DEBUG_TGL() + SERIAL_SOFT_RXD_INT_EXIT(); + SERIAL_SOFT_DEBUG_TGL(); } diff --git a/protocol/serial_uart.c b/protocol/serial_uart.c new file mode 100644 index 00000000..6c0af881 --- /dev/null +++ b/protocol/serial_uart.c @@ -0,0 +1,93 @@ +/* +Copyright 2013 Jun WAKO + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ + +#include +#include +#include +#include "serial.h" + + +void serial_init(void) +{ + SERIAL_UART_INIT(); +} + +// RX ring buffer +#define RBUF_SIZE 8 +static uint8_t rbuf[RBUF_SIZE]; +static uint8_t rbuf_head = 0; +static uint8_t rbuf_tail = 0; + +uint8_t serial_recv(void) +{ + uint8_t data = 0; + if (rbuf_head == rbuf_tail) { + return 0; + } + + data = rbuf[rbuf_tail]; + rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; + return data; +} + +int16_t serial_recv2(void) +{ + uint8_t data = 0; + if (rbuf_head == rbuf_tail) { + return -1; + } + + data = rbuf[rbuf_tail]; + rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; + return data; +} + +void serial_send(uint8_t data) +{ + while (!SERIAL_UART_TXD_READY) ; + SERIAL_UART_DATA = data; +} + +// USART RX complete interrupt +ISR(SERIAL_UART_RXD_VECT) +{ + uint8_t next = (rbuf_head + 1) % RBUF_SIZE; + if (next != rbuf_tail) { + rbuf[rbuf_head] = SERIAL_UART_DATA; + rbuf_head = next; + } +}