Update features for RedScarfII

- USB 6KRO
- SoftPWM LED
- Breathing LED
- Fading LED
- Typing LED
- Ledmap
- Ledmap in EEPROM

keyboard/RedScarfII/Makefile

@@ -51,7 +51,8 @@ TARGET_DIR = .
 SRC =	keymap_common.c \
 	matrix.c \
 	led.c \
-	backlight.c
+	backlight.c \
+	ledmap.c
 
 ifdef KEYMAP
     SRC := keymap_$(KEYMAP).c $(SRC)
@@ -127,12 +128,18 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes	# Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+USB_6KRO_ENABLE = yes	# USB 6key Rollover
 #PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 #PS2_USE_BUSYWAIT = yes
 BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-KEYMAP_EX_ENABLE = yes	# External keymap in eeprom
+KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom
-KEYMAP_SECTION_ENABLE = yes	# Fixed address keymap for keymap editor
+#KEYMAP_SECTION_ENABLE = yes	# Fixed address keymap for keymap editor
+SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight
+FADING_LED_ENABLE = yes # Enable fading backlight
 BREATHING_LED_ENABLE = yes # Enable breathing backlight
+LEDMAP_ENABLE = yes		# Enable LED mapping
+LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom
+
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax

keyboard/RedScarfII/Makefile.pjrc

@@ -39,7 +39,7 @@
 #----------------------------------------------------------------------------
 
 # Target file name (without extension).
-TARGET = RedScarfII__pjrc
+TARGET = RedScarfII_pjrc
 
 # Directory common source filess exist
 TOP_DIR = ../..
@@ -51,7 +51,8 @@ TARGET_DIR = .
 SRC =	keymap_common.c \
 	matrix.c \
 	led.c \
-	backlight.c
+	backlight.c \
+	ledmap.c
 
 ifdef KEYMAP
     SRC := keymap_$(KEYMAP).c $(SRC)
@@ -99,9 +100,13 @@ COMMAND_ENABLE = yes	# Commands for debug and configuration
 #NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
 #PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-KEYMAP_EX_ENABLE = yes	# External keymap in eeprom
+KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom
-KEYMAP_SECTION_ENABLE = yes	# Fixed address keymap for keymap editor
+#KEYMAP_SECTION_ENABLE = yes	# Fixed address keymap for keymap editor
+SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight
+FADING_LED_ENABLE = yes # Enable fading backlight
 BREATHING_LED_ENABLE = yes # Enable breathing backlight
+LEDMAP_ENABLE = yes		# Enable LED mapping
+LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom
 
 
 # Search Path

keyboard/RedScarfII/backlight.c

@@ -19,33 +19,49 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <avr/interrupt.h>
 #include <avr/pgmspace.h>
 #include "backlight.h"
+#ifdef SOFTPWM_LED_ENABLE
+#include "softpwm_led.h"
+#else
 #include "breathing_led.h"
+#endif
+#include "action.h"
 
 #ifdef BACKLIGHT_ENABLE
 
-void backlight_enable(void);
+static uint8_t backlight_mode;
-void backlight_disable(void);
-inline void backlight_set_raw(uint8_t raw);
 
 static const uint8_t backlight_table[] PROGMEM = {
     0, 16, 128, 255
 };
 
+void backlight_enable(void);
+void backlight_disable(void);
+inline void backlight_set_raw(uint8_t raw);
+
 /* Backlight pin configuration
  * PWM: PB7(OC1C)
  */
 void backlight_enable(void)
 {
+#ifdef SOFTPWM_LED_ENABLE
+    DDRB |= (1<<PB7);
+    softpwm_led_enable();
+#else
     // Turn on PWM
     DDRB |= (1<<PB7);
     cli();
     TCCR1A |= ((1<<WGM10) | (1<<COM1C1));
     TCCR1B |= ((1<<CS11) | (1<<CS10));
     sei();
+#endif
 }
 
 void backlight_disable(void)
 {
+#ifdef SOFTPWM_LED_ENABLE
+    DDRB &= ~(1<<PB7);
+    softpwm_led_disable();
+#else
     // Turn off PWM
     cli();
     DDRB &= ~(1<<PB7);
@@ -53,6 +69,7 @@ void backlight_disable(void)
     TCCR1B &= ~( (1<<CS11) | (1<<CS10) );
     sei();
     OCR1C = 0;
+#endif
 }
 
 void backlight_set(uint8_t level)
@@ -63,19 +80,54 @@ void backlight_set(uint8_t level)
         case 2:
         case 3:
             backlight_enable();
+#ifdef SOFTPWM_LED_ENABLE
+#ifdef FADING_LED_ENABLE
+            fading_led_disable_all();
+#endif
+            breathing_led_disable_all();
+#else
             breathing_led_disable();
+#endif
             backlight_set_raw(pgm_read_byte(&backlight_table[level]));
             break;
         case 4:
         case 5:
         case 6:
             backlight_enable();
+#ifdef SOFTPWM_LED_ENABLE
+#ifdef FADING_LED_ENABLE
+            fading_led_disable_all();
+#endif
+            breathing_led_enable_all();
+#else
             breathing_led_enable();
+#endif
             breathing_led_set_duration(6 - level);
             break;
+#ifdef FADING_LED_ENABLE
+        case 7:
+            backlight_enable();
+            fading_led_enable_all();
+            breathing_led_disable_all();
+            fading_led_set_direction(FADING_LED_FADE_IN);
+            fading_led_set_duration(3);
+        case 8:
+            backlight_enable();
+            fading_led_enable_all();
+            breathing_led_disable_all();
+            fading_led_set_direction(FADING_LED_FADE_OUT);
+            fading_led_set_duration(3);
+#endif
         case 0:
         default:
+#ifdef SOFTPWM_LED_ENABLE
+#ifdef FADING_LED_ENABLE
+            fading_led_disable_all();
+#endif
+            breathing_led_disable_all();
+#else
             breathing_led_disable();
+#endif
             backlight_disable();
             break;
     }
@@ -90,16 +142,54 @@ void backlight_set(uint8_t level)
 #endif
 }
 
+#ifndef SOFTPWM_LED_ENABLE
 #ifdef BREATHING_LED_ENABLE
 void breathing_led_set_raw(uint8_t raw)
 {
     backlight_set_raw(raw);
 }
 #endif
+#endif
 
 inline void backlight_set_raw(uint8_t raw)
 {
+#ifdef SOFTPWM_LED_ENABLE
+    softpwm_led_set_all(raw);
+#else
     OCR1C = raw;
+#endif
 }
 
+#ifndef LEDMAP_ENABLE
+#ifdef SOFTPWM_LED_ENABLE
+void softpwm_led_on(uint8_t index)
+{
+    PORTB |= (1<<PB7);
+}
+
+void softpwm_led_off(uint8_t index)
+{
+    PORTB &= ~(1<<PB7);
+}
+#endif
+#endif
+
+#ifdef SOFTPWM_LED_ENABLE
+#ifdef FADING_LED_ENABLE
+void action_keyevent(keyevent_t event)
+{
+    if (backlight_mode == 7) {
+        if (event.pressed) {
+            softpwm_led_decrease_all(32);
+        }
+    }
+    if (backlight_mode == 8) {
+        if (event.pressed) {
+            softpwm_led_increase_all(32);
+        }
+    }
+}
+#endif
+#endif
+
 #endif

keyboard/RedScarfII/config.h

@@ -43,11 +43,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* number of backlight levels */
 #ifdef BREATHING_LED_ENABLE
+#ifdef FADING_LED_ENABLE
+#define BACKLIGHT_LEVELS 8
+#else
 #define BACKLIGHT_LEVELS 6
+#endif
 #else
 #define BACKLIGHT_LEVELS 3
 #endif
 
+#define LED_COUNT 4
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboard/RedScarfII/keymap_common.c

@@ -19,7 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* translates key to keycode */
 uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
 {
-#ifndef KEYMAP_EX_ENABLE
+#ifndef KEYMAP_IN_EEPROM_ENABLE
     return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
 #else
     return eeconfig_read_keymap_key(layer, key.row, key.col);
@@ -30,7 +30,7 @@ uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
 action_t keymap_fn_to_action(uint8_t keycode)
 {
     return (action_t) {
-#ifndef KEYMAP_EX_ENABLE
+#ifndef KEYMAP_IN_EEPROM_ENABLE
         .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)])
 #else
         .code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode))
@@ -38,7 +38,7 @@ action_t keymap_fn_to_action(uint8_t keycode)
     };
 }
 
-#ifdef KEYMAP_EX_ENABLE
+#ifdef KEYMAP_IN_EEPROM_ENABLE
 const uint8_t* keymaps_pointer(void) {
     return (const uint8_t*)keymaps;
 }

keyboard/RedScarfII/keymap_common.h

@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "print.h"
 #include "debug.h"
 #include "keymap.h"
-#include "keymap_ex.h"
+#include "keymap_in_eeprom.h"
 
 
 extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];

keyboard/RedScarfII/keymap_default.c

@@ -81,7 +81,7 @@ const uint16_t fn_actions[] PROGMEM = {
     [4] = ACTION_LAYER_TOGGLE(2)
 };
 
-#ifdef KEYMAP_EX_ENABLE
+#ifdef KEYMAP_IN_EEPROM_ENABLE
 uint16_t keys_count(void) {
     return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS;
 }

keyboard/RedScarfII/led.c

@@ -19,6 +19,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "stdint.h"
 #include "led.h"
 
+#ifndef LEDMAP_ENABLE
+
 /* LED pin configuration
  * CapsLock: PC7
  * NumLock:  PE6
@@ -56,3 +58,5 @@ void led_set(uint8_t usb_led)
         PORTC &= ~(1<<PC6);
     }
 }
+
+#endif

keyboard/RedScarfII/ledmap.c

@@ -0,0 +1,88 @@
+/*
+Copyright 2014 Kai Ryu <kai1103@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/pgmspace.h>
+#include "ledmap.h"
+
+#ifdef LEDMAP_ENABLE
+
+static const uint8_t ledmaps[LED_COUNT] PROGMEM = {
+    [0] = LEDMAP_CAPS_LOCK | LEDMAP_BACKLIGHT,      // CapsLock
+    [1] = LEDMAP_NUM_LOCK | LEDMAP_BACKLIGHT,       // NumLock
+    [2] = LEDMAP_SCROLL_LOCK | LEDMAP_BACKLIGHT,    // Logo
+    [3] = LEDMAP_BACKLIGHT,                         // Backlight
+};
+
+uint8_t ledmap_get_code(uint8_t index)
+{
+    return pgm_read_byte(&ledmaps[index]);
+}
+
+/* LED pin configration
+ *   CapsLock:  PC7
+ *   NumLock:   PE6
+ *   Logo:      PC6
+ *   Backlight: PB7
+ */
+void ledmap_led_init(void)
+{
+    DDRC  |=  (1<<PC7);
+    PORTC |=  (1<<PC7);
+    DDRE  |=  (1<<PE6);
+    PORTE |=  (1<<PE6);
+    DDRC  |=  (1<<PC6);
+    PORTC &= ~(1<<PC6);
+    DDRB  |=  (1<<PB7);
+    PORTB &= ~(1<<PB7);
+}
+
+void ledmap_led_on(uint8_t index)
+{
+    switch (index) {
+        case 0:
+            PORTC &= ~(1<<PC7);
+            break;
+        case 1:
+            PORTE &= ~(1<<PE6);
+            break;
+        case 2:
+            PORTC |=  (1<<PC6);
+            break;
+        case 3:
+            PORTB |=  (1<<PB7);
+    }
+}
+
+void ledmap_led_off(uint8_t index)
+{
+    switch (index) {
+        case 0:
+            PORTC |=  (1<<PC7);
+            break;
+        case 1:
+            PORTE |=  (1<<PE6);
+            break;
+        case 2:
+            PORTC &= ~(1<<PB6);
+            break;
+        case 3:
+            PORTB &= ~(1<<PB7);
+            break;
+    }
+}
+
+#endif