@@ -0,0 +1,159 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = cw40_lufa | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core_custom | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
ledmap.c \ | |||
backlight.c \ | |||
light_ws2812.c \ | |||
rgb.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_default.c $(SRC) | |||
endif | |||
ifdef VER | |||
OPT_DEFS += -DVER_$(VER) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Additional definitions from command line | |||
ifdef DEFS | |||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||
endif | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
USB_6KRO_ENABLE = yes # USB 6key Rollover | |||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||
#PS2_USE_BUSYWAIT = yes | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom | |||
#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||
SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight | |||
FADING_LED_ENABLE = yes # Enable fading backlight | |||
BREATHING_LED_ENABLE = yes # Enable breathing backlight | |||
LEDMAP_ENABLE = yes # Enable LED mapping | |||
LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol/lufa.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -0,0 +1,235 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#include <avr/pgmspace.h> | |||
#include "backlight.h" | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#include "softpwm_led.h" | |||
#else | |||
#include "breathing_led.h" | |||
#endif | |||
#include "action.h" | |||
#include "rgb.h" | |||
#ifdef BACKLIGHT_ENABLE | |||
void backlight_enable(void); | |||
void backlight_disable(void); | |||
inline void backlight_set_raw(uint8_t raw); | |||
static const uint8_t backlight_table[] PROGMEM = { | |||
0, 16, 128, 255 | |||
}; | |||
extern backlight_config_t backlight_config; | |||
uint8_t backlight_brightness; | |||
/* Backlight pin configuration | |||
* Backlight: PE6 - OC1B | |||
*/ | |||
#ifndef SOFTPWM_LED_ENABLE | |||
void backlight_enable(void) | |||
{ | |||
// Turn on PWM | |||
LED4_DDR |= (1<<LED4_BIT); | |||
cli(); | |||
TCCR1A |= ((1<<WGM10) | (1<<COM1B1)); | |||
TCCR1B |= ((1<<CS11) | (1<<CS10)); | |||
sei(); | |||
} | |||
#endif | |||
#ifndef SOFTPWM_LED_ENABLE | |||
void backlight_disable(void) | |||
{ | |||
// Turn off PWM | |||
LED4_DDR &= ~(1<<LED4_BIT); | |||
cli(); | |||
TCCR1A &= ~((1<<WGM10) | (1<<COM1B1)); | |||
TCCR1B &= ~((1<<CS11) | (1<<CS10)); | |||
sei(); | |||
LED4_OCR = 0; | |||
} | |||
#endif | |||
void backlight_set(uint8_t level) | |||
{ | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_enable(); | |||
#endif | |||
#ifdef BREATHING_LED_ENABLE | |||
switch (level) { | |||
case 1: | |||
case 2: | |||
case 3: | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_led_enable_all(); | |||
#ifdef FADING_LED_ENABLE | |||
fading_led_disable_all(); | |||
#endif | |||
breathing_led_disable_all(); | |||
#else | |||
backlight_enable(); | |||
breathing_led_disable(); | |||
#endif | |||
backlight_brightness = pgm_read_byte(&backlight_table[level]); | |||
#ifdef RGB_LED_ENABLE | |||
rgb_set_brightness(backlight_brightness); | |||
#endif | |||
backlight_set_raw(backlight_brightness); | |||
break; | |||
case 4: | |||
case 5: | |||
case 6: | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_led_enable_all(); | |||
#ifdef FADING_LED_ENABLE | |||
fading_led_disable_all(); | |||
#endif | |||
breathing_led_enable_all(); | |||
#else | |||
backlight_enable(); | |||
breathing_led_enable(); | |||
#endif | |||
breathing_led_set_duration(6 - level); | |||
break; | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
case 7: | |||
softpwm_led_enable_all(); | |||
fading_led_enable_all(); | |||
breathing_led_disable_all(); | |||
fading_led_set_direction_all(FADING_LED_FADE_IN); | |||
fading_led_set_duration(3); | |||
break; | |||
case 8: | |||
softpwm_led_enable_all(); | |||
fading_led_enable_all(); | |||
breathing_led_disable_all(); | |||
fading_led_set_direction_all(FADING_LED_FADE_OUT); | |||
fading_led_set_duration(3); | |||
break; | |||
#endif | |||
#endif | |||
case 0: | |||
default: | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
fading_led_disable_all(); | |||
#endif | |||
breathing_led_disable_all(); | |||
backlight_brightness = 0; | |||
backlight_set_raw(backlight_brightness); | |||
softpwm_led_disable_all(); | |||
#else | |||
breathing_led_disable(); | |||
backlight_disable(); | |||
#endif | |||
break; | |||
} | |||
#else | |||
if (level > 0) { | |||
backlight_enable(); | |||
backlight_set_raw(pgm_read_byte(&backlight_table[level])); | |||
} | |||
else { | |||
backlight_disable(); | |||
} | |||
#endif | |||
} | |||
#ifndef SOFTPWM_LED_ENABLE | |||
#ifdef BREATHING_LED_ENABLE | |||
void breathing_led_set_raw(uint8_t raw) | |||
{ | |||
backlight_set_raw(raw); | |||
} | |||
#endif | |||
#endif | |||
inline void backlight_set_raw(uint8_t raw) | |||
{ | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_led_set_all(raw); | |||
#else | |||
LED4_OCR = raw; | |||
#endif | |||
} | |||
#ifndef LEDMAP_ENABLE | |||
#ifdef SOFTPWM_LED_ENABLE | |||
void softpwm_led_init(void) | |||
{ | |||
DDRE |= (1<<PE6); | |||
} | |||
void softpwm_led_on(uint8_t index) | |||
{ | |||
PORTE |= (1<<PE6); | |||
} | |||
void softpwm_led_off(uint8_t index) | |||
{ | |||
PORTE &= ~(1<<PE6); | |||
} | |||
#endif | |||
#endif | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
void action_keyevent(keyevent_t event) | |||
{ | |||
if (backlight_config.enable) { | |||
if (backlight_config.level == 7) { | |||
if (event.pressed) { | |||
fading_led_set_delay_all(64); | |||
softpwm_led_decrease_all(32); | |||
} | |||
} | |||
if (backlight_config.level == 8) { | |||
if (event.pressed) { | |||
fading_led_set_delay_all(64); | |||
softpwm_led_increase_all(32); | |||
} | |||
} | |||
} | |||
} | |||
#endif | |||
#ifdef RGB_LED_ENABLE | |||
#ifdef CUSTOM_LED_ENABLE | |||
void softpwm_led_custom(void) | |||
{ | |||
rgb_fading(); | |||
} | |||
void fading_led_custom(uint8_t *value) | |||
{ | |||
rgb_set_brightness(value[0]); | |||
} | |||
void breathing_led_custom(uint8_t *value) | |||
{ | |||
rgb_set_brightness(value[0]); | |||
} | |||
#endif | |||
#endif | |||
#endif | |||
#endif |
@@ -0,0 +1,101 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x1209 | |||
#define PRODUCT_ID 0x2328 | |||
#ifdef VER_PROTOTYPE | |||
#define DEVICE_VER 0x0400 | |||
#else | |||
#define DEVICE_VER 0x0401 | |||
#endif | |||
#define MANUFACTURER K.T.E.C. | |||
#define PRODUCT CW40 | |||
#define DESCRIPTION t.m.k. keyboard firmware for CW40 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 11 | |||
/* keymap in eeprom */ | |||
#define FN_ACTIONS_COUNT 32 | |||
#define KEYMAPS_COUNT 8 | |||
#define EECONFIG_KEYMAP_IN_EEPROM 0x11 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* number of backlight levels */ | |||
#ifdef BREATHING_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
#define BACKLIGHT_LEVELS 8 | |||
#else | |||
#define BACKLIGHT_LEVELS 6 | |||
#endif | |||
#else | |||
#define BACKLIGHT_LEVELS 3 | |||
#endif | |||
/* enable customized backlight logic */ | |||
#define BACKLIGHT_CUSTOM | |||
#define RGB_LED_ENABLE | |||
#define CUSTOM_LED_ENABLE | |||
#define SOFTPWM_LED_FREQ 80 | |||
/* number of leds */ | |||
#define LED_COUNT 4 | |||
//#define EECONFIG_LEDMAP_IN_EEPROM 8 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
//#define SUSPEND_ACTION | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@@ -0,0 +1,53 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/pgmspace.h> | |||
#include "keymap.h" | |||
#include "keymap_in_eeprom.h" | |||
#include "keymap_common.h" | |||
/* translates key to keycode */ | |||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) | |||
{ | |||
#ifndef KEYMAP_IN_EEPROM_ENABLE | |||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||
#else | |||
return eeconfig_read_keymap_key(layer, key.row, key.col); | |||
#endif | |||
} | |||
/* translates Fn keycode to action */ | |||
action_t keymap_fn_to_action(uint8_t keycode) | |||
{ | |||
return (action_t) { | |||
#ifndef KEYMAP_IN_EEPROM_ENABLE | |||
.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) | |||
#else | |||
.code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) | |||
#endif | |||
}; | |||
} | |||
#ifdef KEYMAP_IN_EEPROM_ENABLE | |||
const uint8_t* keymaps_pointer(void) { | |||
return (const uint8_t*)keymaps; | |||
} | |||
const uint16_t* fn_actions_pointer(void) { | |||
return fn_actions; | |||
} | |||
#endif |
@@ -0,0 +1,41 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef KEYMAP_COMMON_H | |||
#define KEYMAP_COMMON_H | |||
#include <stdint.h> | |||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; | |||
extern const uint16_t fn_actions[]; | |||
/* CW40 keymap definition macro | |||
*/ | |||
#define KEYMAP( \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K3K, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, \ | |||
K3A, K3B, K3C, K3F, K3I, K3J \ | |||
) { \ | |||
{ KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F, KC_##K0G, KC_##K0H, KC_##K0I, KC_##K0J, KC_##K0K }, \ | |||
{ KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K }, \ | |||
{ KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K }, \ | |||
{ KC_##K3A, KC_##K3B, KC_##K3C, KC_NO, KC_NO, KC_##K3F, KC_NO, KC_NO, KC_##K3I, KC_##K3J, KC_##K3K } \ | |||
} | |||
#endif |
@@ -0,0 +1,179 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/pgmspace.h> | |||
#include "keycode.h" | |||
#include "action.h" | |||
#include "action_util.h" | |||
#include "keymap_common.h" | |||
#include "rgb.h" | |||
// Default | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { | |||
#else | |||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { | |||
#endif | |||
/* Keymap 0: Default Layer | |||
* ,-----------------------------------------------. | |||
* |Fn3| Q| W| E| R| T| Y| U| I| O| P| BS| | |||
* |-----------------------------------------------| | |||
* |Tab | A| S| D| F| G| H| J| K| L|Enter | | |||
* |-----------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| .|RShi|Fn0| | |||
* |-----------------------------------------------| | |||
* |Ctrl |Gui|Alt | Space |Fn1|Ctrl| | |||
* `-----------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
FN3, Q, W, E, R, T, Y, U, I, O, P, BSPC, \ | |||
TAB, A, S, D, F, G, H, J, K, L, ENT, \ | |||
LSFT, Z, X, C, V, B, N, M, DOT, RSFT,FN0, \ | |||
LCTL,LGUI,LALT, SPC, FN1, RCTL ), | |||
/* Keymap 1: Arrow Keys Overlay | |||
* ,-----------------------------------------------. | |||
* | | |Up | | | | | | | | | | | |||
* |-----------------------------------------------| | |||
* | |Lef|Dow|Rig| | | | | | | | | |||
* |-----------------------------------------------| | |||
* | | | | | | | | | | | | | |||
* |-----------------------------------------------| | |||
* | | | | | | | | |||
* `-----------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
TRNS,TRNS,UP, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \ | |||
TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS ), | |||
/* Keymap 2: Fn Layer 1 | |||
* ,-----------------------------------------------. | |||
* | 1| 2| 3| 4| 5| 6| 7| 8| 8| 9| -| =| | |||
* |-----------------------------------------------| | |||
* |Caps| | | | | | | | | ;| '| | |||
* |-----------------------------------------------| | |||
* | |Fn7|Fn8|Fn5|Fn4|Fn6| | | ,| /| | | |||
* |-----------------------------------------------| | |||
* | | | | Fn2 | | | | |||
* `-----------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, \ | |||
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,SCLN, QUOT, \ | |||
TRNS, FN7, FN8, FN5, FN4, FN6, TRNS,TRNS,COMM,SLSH,TRNS, \ | |||
TRNS,TRNS,TRNS, FN2, TRNS,TRNS ), | |||
/* Keymap 3: Fn Layer 2 | |||
* ,-----------------------------------------------. | |||
* |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| | |||
* |-----------------------------------------------| | |||
* |Caps| | | | | | | | [| ]|\ | | |||
* |-----------------------------------------------| | |||
* | |Fn7|Fn8|Fn5|Fn4|Fn6| | | ,| /| | | |||
* |-----------------------------------------------| | |||
* | | | | Fn2 | | | | |||
* `-----------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, \ | |||
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,LBRC,RBRC, BSLS, \ | |||
TRNS, FN7, FN8, FN5, FN4, FN6, TRNS,TRNS,COMM,SLSH,TRNS, \ | |||
TRNS,TRNS,TRNS, FN2, TRNS,TRNS ), | |||
}; | |||
#ifndef NO_ACTION_FUNCTION | |||
enum function_id { | |||
AF_RGB_TOGGLE = 0, | |||
AF_RGB_DECREASE, | |||
AF_RGB_INCREASE, | |||
AF_RGB_STEP, | |||
AF_TRICKY_ESC | |||
}; | |||
#endif | |||
/* | |||
* Fn action definition | |||
*/ | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = { | |||
#else | |||
const uint16_t fn_actions[] PROGMEM = { | |||
#endif | |||
[0] = ACTION_LAYER_MOMENTARY(2), | |||
[1] = ACTION_LAYER_MOMENTARY(3), | |||
[2] = ACTION_LAYER_TOGGLE(1), | |||
[3] = ACTION_FUNCTION(AF_TRICKY_ESC), | |||
[4] = ACTION_BACKLIGHT_TOGGLE(), | |||
[5] = ACTION_BACKLIGHT_DECREASE(), | |||
[6] = ACTION_BACKLIGHT_INCREASE(), | |||
[7] = ACTION_FUNCTION(AF_RGB_TOGGLE), | |||
[8] = ACTION_FUNCTION(AF_RGB_STEP) | |||
}; | |||
#ifdef KEYMAP_IN_EEPROM_ENABLE | |||
uint16_t keys_count(void) { | |||
return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS; | |||
} | |||
uint16_t fn_actions_count(void) { | |||
return sizeof(fn_actions) / sizeof(fn_actions[0]); | |||
} | |||
#endif | |||
#ifndef NO_ACTION_FUNCTION | |||
#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
#ifdef RGB_LED_ENABLE | |||
if (record->event.pressed) { | |||
switch (id) { | |||
case AF_RGB_TOGGLE: | |||
rgb_toggle(); | |||
break; | |||
case AF_RGB_DECREASE: | |||
rgb_decrease(); | |||
break; | |||
case AF_RGB_INCREASE: | |||
rgb_increase(); | |||
break; | |||
case AF_RGB_STEP: | |||
rgb_step(); | |||
break; | |||
} | |||
} | |||
#endif | |||
static uint8_t tricky_esc_registered; | |||
switch (id) { | |||
case AF_TRICKY_ESC: | |||
if (record->event.pressed) { | |||
if (get_mods() & MODS_SHIFT_MASK) { | |||
tricky_esc_registered = KC_GRV; | |||
} | |||
else { | |||
tricky_esc_registered = KC_ESC; | |||
} | |||
register_code(tricky_esc_registered); | |||
send_keyboard_report(); | |||
} | |||
else { | |||
unregister_code(tricky_esc_registered); | |||
send_keyboard_report(); | |||
} | |||
break; | |||
} | |||
} | |||
#endif |
@@ -0,0 +1,39 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
#ifndef LEDMAP_ENABLE | |||
/* LED pin configuration | |||
*/ | |||
void led_set(uint8_t usb_led) | |||
{ | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// output low | |||
DDRC |= (1<<PC6); | |||
PORTC &= ~(1<<PC6); | |||
} else { | |||
// Hi-Z | |||
DDRC &= ~(1<<PC6); | |||
PORTC &= ~(1<<PC6); | |||
} | |||
} | |||
#endif |
@@ -0,0 +1,116 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/pgmspace.h> | |||
#include "ledmap.h" | |||
#ifdef LEDMAP_ENABLE | |||
static const uint16_t ledmaps[LED_COUNT] PROGMEM = { | |||
[0] = LEDMAP_CAPS_LOCK | LEDMAP_BACKLIGHT, // CapsLock - PC6 | |||
[1] = LEDMAP_LAYER(3) | LEDMAP_BACKLIGHT, // Esc - PD7 | |||
[2] = LEDMAP_LAYER(1) | LEDMAP_BACKLIGHT, // WASD - PD6 | |||
[3] = LEDMAP_BACKLIGHT, // Backlight - PE6 | |||
}; | |||
ledmap_t ledmap_get_code(uint8_t index) | |||
{ | |||
return (ledmap_t) { .code = pgm_read_word(&ledmaps[index]) }; | |||
} | |||
/* LED pin configration | |||
*/ | |||
void ledmap_led_init(void) | |||
{ | |||
#ifdef VER_PROTOTYPE | |||
DDRC |= (1<<PC6); | |||
PORTC &= ~(1<<PC6); | |||
DDRD |= (1<<PD7 | 1<<PC6); | |||
PORTD &= ~(1<<PD7 | 1<<PC6); | |||
DDRE |= (1<<PE6); | |||
PORTE |= (1<<PE6); | |||
#else | |||
DDRC |= (1<<PC6); | |||
PORTC |= (1<<PC6); | |||
DDRD |= (1<<PD7 | 1<<PC6); | |||
PORTD |= (1<<PD7 | 1<<PC6); | |||
DDRE |= (1<<PE6); | |||
PORTE |= (1<<PE6); | |||
#endif | |||
} | |||
void ledmap_led_on(uint8_t index) | |||
{ | |||
switch (index) { | |||
#ifdef VER_PROTOTYPE | |||
case 0: | |||
PORTC |= (1<<PC6); | |||
break; | |||
case 1: | |||
PORTD |= (1<<PD7); | |||
break; | |||
case 2: | |||
PORTD |= (1<<PD6); | |||
break; | |||
#else | |||
case 0: | |||
PORTC &= ~(1<<PC6); | |||
break; | |||
case 1: | |||
PORTD &= ~(1<<PD7); | |||
break; | |||
case 2: | |||
PORTD &= ~(1<<PD6); | |||
break; | |||
#endif | |||
case 3: | |||
PORTE &= ~(1<<PE6); | |||
break; | |||
} | |||
} | |||
void ledmap_led_off(uint8_t index) | |||
{ | |||
switch (index) { | |||
#ifdef VER_PROTOTYPE | |||
case 0: | |||
PORTC &= ~(1<<PC6); | |||
break; | |||
case 1: | |||
PORTD &= ~(1<<PD7); | |||
break; | |||
case 2: | |||
PORTD &= ~(1<<PD6); | |||
break; | |||
#else | |||
case 0: | |||
PORTC |= (1<<PC6); | |||
break; | |||
case 1: | |||
PORTD |= (1<<PD7); | |||
break; | |||
case 2: | |||
PORTD |= (1<<PD6); | |||
break; | |||
#endif | |||
case 3: | |||
PORTE |= (1<<PE6); | |||
break; | |||
} | |||
} | |||
#endif |
@@ -0,0 +1,170 @@ | |||
/* | |||
* light weight WS2812 lib V2.0b | |||
* | |||
* Controls WS2811/WS2812/WS2812B RGB-LEDs | |||
* Author: Tim ([email protected]) | |||
* | |||
* Jan 18th, 2014 v2.0b Initial Version | |||
* | |||
* License: GNU GPL v2 (see License.txt) | |||
*/ | |||
#include "light_ws2812.h" | |||
#include <avr/interrupt.h> | |||
#include <avr/io.h> | |||
#include <util/delay.h> | |||
void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) | |||
{ | |||
ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); | |||
} | |||
void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) | |||
{ | |||
ws2812_DDRREG |= pinmask; // Enable DDR | |||
ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask); | |||
_delay_us(50); | |||
} | |||
void ws2812_sendarray(uint8_t *data,uint16_t datlen) | |||
{ | |||
ws2812_sendarray_mask(data,datlen,_BV(ws2812_pin)); | |||
} | |||
/* | |||
This routine writes an array of bytes with RGB values to the Dataout pin | |||
using the fast 800kHz clockless WS2811/2812 protocol. | |||
*/ | |||
// Timing in ns | |||
#define w_zeropulse 350 | |||
#define w_onepulse 900 | |||
#define w_totalperiod 1250 | |||
// Fixed cycles used by the inner loop | |||
#define w_fixedlow 2 | |||
#define w_fixedhigh 4 | |||
#define w_fixedtotal 8 | |||
// Insert NOPs to match the timing, if possible | |||
#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000) | |||
#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000) | |||
#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000) | |||
// w1 - nops between rising edge and falling edge - low | |||
#define w1 (w_zerocycles-w_fixedlow) | |||
// w2 nops between fe low and fe high | |||
#define w2 (w_onecycles-w_fixedhigh-w1) | |||
// w3 nops to complete loop | |||
#define w3 (w_totalcycles-w_fixedtotal-w1-w2) | |||
#if w1>0 | |||
#define w1_nops w1 | |||
#else | |||
#define w1_nops 0 | |||
#endif | |||
// The only critical timing parameter is the minimum pulse length of the "0" | |||
// Warn or throw error if this timing can not be met with current F_CPU settings. | |||
#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000) | |||
#if w_lowtime>550 | |||
#error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" | |||
#elif w_lowtime>450 | |||
#warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." | |||
#warning "Please consider a higher clockspeed, if possible" | |||
#endif | |||
#if w2>0 | |||
#define w2_nops w2 | |||
#else | |||
#define w2_nops 0 | |||
#endif | |||
#if w3>0 | |||
#define w3_nops w3 | |||
#else | |||
#define w3_nops 0 | |||
#endif | |||
#define w_nop1 "nop \n\t" | |||
#define w_nop2 "rjmp .+0 \n\t" | |||
#define w_nop4 w_nop2 w_nop2 | |||
#define w_nop8 w_nop4 w_nop4 | |||
#define w_nop16 w_nop8 w_nop8 | |||
void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) | |||
{ | |||
uint8_t curbyte,ctr,masklo; | |||
uint8_t sreg_prev; | |||
masklo =~maskhi&ws2812_PORTREG; | |||
maskhi |= ws2812_PORTREG; | |||
sreg_prev=SREG; | |||
cli(); | |||
while (datlen--) { | |||
curbyte=*data++; | |||
asm volatile( | |||
" ldi %0,8 \n\t" | |||
"loop%=: \n\t" | |||
" out %2,%3 \n\t" // '1' [01] '0' [01] - re | |||
#if (w1_nops&1) | |||
w_nop1 | |||
#endif | |||
#if (w1_nops&2) | |||
w_nop2 | |||
#endif | |||
#if (w1_nops&4) | |||
w_nop4 | |||
#endif | |||
#if (w1_nops&8) | |||
w_nop8 | |||
#endif | |||
#if (w1_nops&16) | |||
w_nop16 | |||
#endif | |||
" sbrs %1,7 \n\t" // '1' [03] '0' [02] | |||
" out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low | |||
" lsl %1 \n\t" // '1' [04] '0' [04] | |||
#if (w2_nops&1) | |||
w_nop1 | |||
#endif | |||
#if (w2_nops&2) | |||
w_nop2 | |||
#endif | |||
#if (w2_nops&4) | |||
w_nop4 | |||
#endif | |||
#if (w2_nops&8) | |||
w_nop8 | |||
#endif | |||
#if (w2_nops&16) | |||
w_nop16 | |||
#endif | |||
" out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high | |||
#if (w3_nops&1) | |||
w_nop1 | |||
#endif | |||
#if (w3_nops&2) | |||
w_nop2 | |||
#endif | |||
#if (w3_nops&4) | |||
w_nop4 | |||
#endif | |||
#if (w3_nops&8) | |||
w_nop8 | |||
#endif | |||
#if (w3_nops&16) | |||
w_nop16 | |||
#endif | |||
" dec %0 \n\t" // '1' [+2] '0' [+2] | |||
" brne loop%=\n\t" // '1' [+3] '0' [+4] | |||
: "=&d" (ctr) | |||
: "r" (curbyte), "I" (_SFR_IO_ADDR(ws2812_PORTREG)), "r" (maskhi), "r" (masklo) | |||
); | |||
} | |||
SREG=sreg_prev; | |||
} |
@@ -0,0 +1,63 @@ | |||
/* | |||
* light weight WS2812 lib include | |||
* | |||
* Version 2.0a3 - Jan 18th 2014 | |||
* Author: Tim ([email protected]) | |||
* | |||
* Please do not change this file! All configuration is handled in "ws2812_config.h" | |||
* | |||
* License: GNU GPL v2 (see License.txt) | |||
+ | |||
*/ | |||
#ifndef LIGHT_WS2812_H_ | |||
#define LIGHT_WS2812_H_ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#include "ws2812_config.h" | |||
/* | |||
* Structure of the LED array | |||
*/ | |||
struct cRGB { uint8_t g; uint8_t r; uint8_t b; }; | |||
/* User Interface | |||
* | |||
* Input: | |||
* ledarray: An array of GRB data describing the LED colors | |||
* number_of_leds: The number of LEDs to write | |||
* pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0) | |||
* | |||
* The functions will perform the following actions: | |||
* - Set the data-out pin as output | |||
* - Send out the LED data | |||
* - Wait 50µs to reset the LEDs | |||
*/ | |||
void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds); | |||
void ws2812_setleds_pin(struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask); | |||
/* | |||
* Old interface / Internal functions | |||
* | |||
* The functions take a byte-array and send to the data output as WS2812 bitstream. | |||
* The length is the number of bytes to send - three per LED. | |||
*/ | |||
void ws2812_sendarray (uint8_t *array,uint16_t length); | |||
void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask); | |||
/* | |||
* Internal defines | |||
*/ | |||
#define CONCAT(a, b) a ## b | |||
#define CONCAT_EXP(a, b) CONCAT(a, b) | |||
#define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port) | |||
#define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port) | |||
#endif /* LIGHT_WS2812_H_ */ |
@@ -0,0 +1,179 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
/* | |||
* scan matrix | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/io.h> | |||
#include <util/delay.h> | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "matrix.h" | |||
#ifndef DEBOUNCE | |||
# define DEBOUNCE 5 | |||
#endif | |||
static uint8_t debouncing = DEBOUNCE; | |||
/* matrix state(1:on, 0:off) */ | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
static matrix_row_t read_cols(void); | |||
static void init_cols(void); | |||
static void unselect_rows(void); | |||
static void select_row(uint8_t row); | |||
inline | |||
uint8_t matrix_rows(void) | |||
{ | |||
return MATRIX_ROWS; | |||
} | |||
inline | |||
uint8_t matrix_cols(void) | |||
{ | |||
return MATRIX_COLS; | |||
} | |||
void matrix_init(void) | |||
{ | |||
// disable JTAG | |||
MCUCR = (1<<JTD); | |||
MCUCR = (1<<JTD); | |||
// initialize row and col | |||
unselect_rows(); | |||
init_cols(); | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = 0; | |||
matrix_debouncing[i] = 0; | |||
} | |||
} | |||
uint8_t matrix_scan(void) | |||
{ | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
select_row(i); | |||
_delay_us(30); // without this wait read unstable value. | |||
matrix_row_t cols = read_cols(); | |||
if (matrix_debouncing[i] != cols) { | |||
matrix_debouncing[i] = cols; | |||
if (debouncing) { | |||
debug("bounce!: "); debug_hex(debouncing); debug("\n"); | |||
} | |||
debouncing = DEBOUNCE; | |||
} | |||
unselect_rows(); | |||
} | |||
if (debouncing) { | |||
if (--debouncing) { | |||
_delay_ms(1); | |||
} else { | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = matrix_debouncing[i]; | |||
} | |||
} | |||
} | |||
return 1; | |||
} | |||
bool matrix_is_modified(void) | |||
{ | |||
if (debouncing) return false; | |||
return true; | |||
} | |||
inline | |||
bool matrix_is_on(uint8_t row, uint8_t col) | |||
{ | |||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||
} | |||
inline | |||
matrix_row_t matrix_get_row(uint8_t row) | |||
{ | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) | |||
{ | |||
print("\nr/c 0123456789ABCDEF\n"); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
phex(row); print(": "); | |||
pbin_reverse16(matrix_get_row(row)); | |||
print("\n"); | |||
} | |||
} | |||
uint8_t matrix_key_count(void) | |||
{ | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += bitpop16(matrix[i]); | |||
} | |||
return count; | |||
} | |||
/* Column pin configuration | |||
* col: 0 1 2 3 4 5 6 7 8 9 10 | |||
* pin: F0 F1 F4 F5 F6 F7 B3 B4 B5 B6 B7 | |||
*/ | |||
static void init_cols(void) | |||
{ | |||
// Input with pull-up(DDR:0, PORT:1) | |||
DDRF &= ~(1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4 | 1<<PF1 | 1<<PF0); | |||
PORTF |= (1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4 | 1<<PF1 | 1<<PF0); | |||
DDRB &= ~(1<<PB7 | 1<<PB6 | 1<<PB5 | 1<<PB4 | 1<<PB3); | |||
PORTB |= (1<<PB7 | 1<<PB6 | 1<<PB5 | 1<<PB4 | 1<<PB3); | |||
} | |||
static matrix_row_t read_cols(void) | |||
{ | |||
return (PINF&(1<<PF0) ? 0 : (1<<0)) | | |||
(PINF&(1<<PF1) ? 0 : (1<<1)) | | |||
(PINF&(1<<PF4) ? 0 : (1<<2)) | | |||
(PINF&(1<<PF5) ? 0 : (1<<3)) | | |||
(PINF&(1<<PF6) ? 0 : (1<<4)) | | |||
(PINF&(1<<PF7) ? 0 : (1<<5)) | | |||
(PINB&(1<<PB3) ? 0 : (1<<6)) | | |||
(PINB&(1<<PB4) ? 0 : (1<<7)) | | |||
(PINB&(1<<PB5) ? 0 : (1<<8)) | | |||
(PINB&(1<<PB6) ? 0 : (1<<9)) | | |||
(PINB&(1<<PB7) ? 0 : (1<<10)); | |||
} | |||
/* Row pin configuration | |||
* row: 0 1 2 3 | |||
* pin: D2 D3 D4 D5 | |||
*/ | |||
static void unselect_rows(void) | |||
{ | |||
DDRD &= ~(1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD5); | |||
} | |||
static void select_row(uint8_t row) | |||
{ | |||
DDRD |= (1<<(row + 2)); | |||
} |
@@ -0,0 +1,259 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/pgmspace.h> | |||
#include <avr/eeprom.h> | |||
#include "softpwm_led.h" | |||
#include "backlight.h" | |||
#include "rgb.h" | |||
#include "light_ws2812.h" | |||
#include "debug.h" | |||
#ifdef RGB_LED_ENABLE | |||
volatile static uint8_t rgb_fading_enable = 0; | |||
static rgb_config_t rgb_config; | |||
static struct cRGB rgb_color[RGB_LED_COUNT]; | |||
static uint16_t rgb_hue = 0; | |||
static uint8_t rgb_saturation = 255; | |||
static uint8_t rgb_brightness = 16; | |||
static uint8_t rgb_rainbow = 0; | |||
extern backlight_config_t backlight_config; | |||
extern uint8_t backlight_brightness; | |||
static void rgb_write_config(void); | |||
static void rgb_read_config(void); | |||
static void rgb_set_level(uint8_t level); | |||
static void rgb_refresh(void); | |||
#if 0 | |||
static void hue_to_rgb(uint16_t hue, struct cRGB *rgb); | |||
#endif | |||
static void hsb_to_rgb(uint16_t hue, uint8_t saturation, uint8_t brightness, struct cRGB *rgb); | |||
void rgb_init(void) | |||
{ | |||
rgb_read_config(); | |||
if (rgb_config.raw == RGB_UNCONFIGURED) { | |||
rgb_config.enable = 0; | |||
rgb_config.level = RGB_OFF; | |||
rgb_write_config(); | |||
} | |||
if (rgb_config.enable) { | |||
rgb_set_level(rgb_config.level); | |||
} | |||
} | |||
void rgb_read_config(void) | |||
{ | |||
rgb_config.raw = eeprom_read_byte(EECONFIG_RGB); | |||
} | |||
void rgb_write_config(void) | |||
{ | |||
eeprom_write_byte(EECONFIG_RGB, rgb_config.raw); | |||
} | |||
void rgb_toggle(void) | |||
{ | |||
if (rgb_config.enable) { | |||
rgb_off(); | |||
} | |||
else { | |||
rgb_on(); | |||
} | |||
} | |||
void rgb_on(void) | |||
{ | |||
rgb_config.enable = 1; | |||
rgb_set_level(rgb_config.level); | |||
rgb_write_config(); | |||
} | |||
void rgb_off(void) | |||
{ | |||
rgb_config.enable = 0; | |||
rgb_set_level(RGB_OFF); | |||
rgb_write_config(); | |||
} | |||
void rgb_decrease(void) | |||
{ | |||
if(rgb_config.level > 0) { | |||
rgb_config.level--; | |||
rgb_config.enable = (rgb_config.level != 0); | |||
rgb_write_config(); | |||
} | |||
rgb_set_level(rgb_config.level); | |||
} | |||
void rgb_increase(void) | |||
{ | |||
if(rgb_config.level < RGB_LEVELS) { | |||
rgb_config.level++; | |||
rgb_config.enable = 1; | |||
rgb_write_config(); | |||
} | |||
rgb_set_level(rgb_config.level); | |||
} | |||
void rgb_step(void) | |||
{ | |||
rgb_config.level++; | |||
if(rgb_config.level > RGB_LEVELS) | |||
{ | |||
rgb_config.level = 0; | |||
} | |||
rgb_config.enable = (rgb_config.level != 0); | |||
rgb_set_level(rgb_config.level); | |||
} | |||
void rgb_set_level(uint8_t level) | |||
{ | |||
xprintf("RGB Level: %d\n", level); | |||
if (level == RGB_OFF) { | |||
rgb_brightness = 0; | |||
} | |||
else if (backlight_config.enable) { | |||
if (backlight_config.level >= 1 && backlight_config.level <= 3) { | |||
rgb_brightness = backlight_brightness; | |||
} | |||
} | |||
else { | |||
rgb_brightness = 16; | |||
} | |||
if (level <= RGB_WHITE) { | |||
rgb_fading_enable = 0; | |||
rgb_rainbow = 0; | |||
if (level != RGB_OFF) { | |||
if (level == RGB_WHITE) { | |||
rgb_saturation = 0; | |||
} | |||
else { | |||
rgb_hue = (level - 1) * 128; | |||
rgb_saturation = 255; | |||
} | |||
if (backlight_config.enable) { | |||
if (backlight_config.level >= 1 && backlight_config.level <= 3) { | |||
rgb_brightness = backlight_brightness; | |||
} | |||
} | |||
else { | |||
rgb_brightness = 16; | |||
} | |||
} | |||
rgb_refresh(); | |||
} | |||
else { | |||
rgb_saturation = 255; | |||
rgb_fading_enable = 1; | |||
rgb_rainbow = (level >= RGB_RAINBOW) ? 1 : 0; | |||
} | |||
} | |||
void rgb_set_brightness(uint8_t brightness) | |||
{ | |||
if (rgb_config.enable) { | |||
rgb_brightness = brightness; | |||
rgb_refresh(); | |||
} | |||
} | |||
void rgb_refresh(void) | |||
{ | |||
struct cRGB rgb; | |||
uint16_t hue; | |||
uint8_t i; | |||
if (rgb_rainbow) { | |||
for (i = 0; i < RGB_LED_COUNT; i++) { | |||
#ifdef VER_PROTOTYPE | |||
uint8_t j; | |||
if (i == 0) j = 1; | |||
else if (i == 1) j = 0; | |||
else j = i; | |||
#endif | |||
hue = rgb_hue + (768 / RGB_LED_COUNT) * i; | |||
hsb_to_rgb(hue, rgb_saturation, rgb_brightness, &rgb); | |||
#ifdef VER_PROTOTYPE | |||
rgb_color[j] = rgb; | |||
#else | |||
rgb_color[i] = rgb; | |||
#endif | |||
} | |||
} | |||
else { | |||
hsb_to_rgb(rgb_hue, rgb_saturation, rgb_brightness, &rgb); | |||
for (i = 0; i < RGB_LED_COUNT; i++) { | |||
rgb_color[i] = rgb; | |||
} | |||
} | |||
/* xprintf("R%d G%d B%d\n", rgb_color[0].r, rgb_color[0].g, rgb_color[0].b); */ | |||
ws2812_setleds(rgb_color, RGB_LED_COUNT); | |||
} | |||
#if 0 | |||
void hue_to_rgb(uint16_t hue, struct cRGB *rgb) | |||
{ | |||
uint8_t hi = hue / 60; | |||
uint16_t f = (hue % 60) * 425 / 100; | |||
uint8_t q = 255 - f; | |||
switch (hi) { | |||
case 0: rgb->r = 255; rgb->g = f; rgb->b = 0; break; | |||
case 1: rgb->r = q; rgb->g = 255; rgb->b = 0; break; | |||
case 2: rgb->r = 0; rgb->g = 255; rgb->b = f; break; | |||
case 3: rgb->r = 0; rgb->g = q; rgb->b = 255; break; | |||
case 4: rgb->r = f; rgb->g = 0; rgb->b = 255; break; | |||
case 5: rgb->r = 255; rgb->g = 0; rgb->b = q; break; | |||
} | |||
} | |||
#endif | |||
/* | |||
* original code: https://blog.adafruit.com/2012/03/14/constant-brightness-hsb-to-rgb-algorithm/ | |||
*/ | |||
void hsb_to_rgb(uint16_t hue, uint8_t saturation, uint8_t brightness, struct cRGB *rgb) | |||
{ | |||
uint8_t temp[5]; | |||
uint8_t n = (hue >> 8) % 3; | |||
uint8_t x = ((((hue & 255) * saturation) >> 8) * brightness) >> 8; | |||
uint8_t s = ((256 - saturation) * brightness) >> 8; | |||
temp[0] = temp[3] = s; | |||
temp[1] = temp[4] = x + s; | |||
temp[2] = brightness - x; | |||
rgb->r = temp[n + 2]; | |||
rgb->g = temp[n + 1]; | |||
rgb->b = temp[n]; | |||
} | |||
void rgb_fading(void) | |||
{ | |||
static uint8_t step = 0; | |||
static uint16_t hue = 0; | |||
if (rgb_fading_enable) { | |||
if (++step > rgb_fading_enable) { | |||
step = 0; | |||
rgb_hue = hue; | |||
rgb_refresh(); | |||
if (++hue >= 768) { | |||
hue = 0; | |||
} | |||
} | |||
} | |||
} | |||
#endif |
@@ -0,0 +1,60 @@ | |||
/* | |||
Copyright 2016 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef RGB_H | |||
#define RGB_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
typedef union { | |||
uint8_t raw; | |||
struct { | |||
uint8_t level :7; | |||
bool enable :1; | |||
}; | |||
} rgb_config_t; | |||
enum { | |||
RGB_OFF = 0, | |||
RGB_RED, | |||
RGB_YELLOW, | |||
RGB_GREEN, | |||
RGB_CYAN, | |||
RGB_BLUE, | |||
RGB_MAGENTA, | |||
RGB_WHITE, | |||
RGB_FADE, | |||
RGB_RAINBOW, | |||
RGB_LEVELS = RGB_RAINBOW | |||
}; | |||
#define EECONFIG_RGB (uint8_t *)10 | |||
#define RGB_UNCONFIGURED 0xFF | |||
#define RGB_LED_COUNT 12 | |||
void rgb_init(void); | |||
void rgb_toggle(void); | |||
void rgb_on(void); | |||
void rgb_off(void); | |||
void rgb_decrease(void); | |||
void rgb_increase(void); | |||
void rgb_step(void); | |||
void rgb_set_brightness(uint8_t brightness); | |||
void rgb_fading(void); | |||
#endif |
@@ -0,0 +1,21 @@ | |||
/* | |||
* light_ws2812_config.h | |||
* | |||
* Created: 18.01.2014 09:58:15 | |||
* | |||
* User Configuration file for the light_ws2812_lib | |||
* | |||
*/ | |||
#ifndef WS2812_CONFIG_H_ | |||
#define WS2812_CONFIG_H_ | |||
/////////////////////////////////////////////////////////////////////// | |||
// Define I/O pin | |||
/////////////////////////////////////////////////////////////////////// | |||
#define ws2812_port C // Data port | |||
#define ws2812_pin 7 // Data out pin | |||
#endif /* WS2812_CONFIG_H_ */ |