1
0

Spellchecking converter README files.

This commit is contained in:
Thomas Russell Murphy 2014-01-04 22:45:52 -05:00 committed by tmk
parent 6e9260cc17
commit 3ee5f565ae
8 changed files with 17 additions and 17 deletions

View File

@ -71,8 +71,8 @@ Notes
Many ADB keyboards has no discrimination between right modifier and left one, Many ADB keyboards has no discrimination between right modifier and left one,
you will always see left control even if you press right control key. you will always see left control even if you press right control key.
Apple Extended Keyboard and Apple Extended Keyboard II are the examples. Apple Extended Keyboard and Apple Extended Keyboard II are the examples.
Though ADB protocol itsef has the ability of distinction between right and left. Though ADB protocol itself has the ability of distinction between right and left.
And most ADB keyboard has no NKRO functionality, though ADB protocol itsef has that. And most ADB keyboard has no NKRO functionality, though ADB protocol itself has that.
See protocol/adb.c for more info. See protocol/adb.c for more info.
EOF EOF

View File

@ -6,7 +6,7 @@ Target MCU is ATMega32u4 but other USB capable AVR will also work.
Hardware Hardware
-------- --------
Connect RX, TX and GND to UART pin of AVR. Note that you may need line drvier/level shfiter like MAX232 to interface high voltage of RS-232C. Connect RX, TX and GND to UART pin of AVR. Note that you may need line driver/level shifter like MAX232 to interface high voltage of RS-232C.

View File

@ -2,7 +2,7 @@ M0110/M0110A to USB keyboard converter
====================================== ======================================
This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
Pics of **M0110 + M0120** and **M0110A**. Pictures of **M0110 + M0120** and **M0110A**.
![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg) ![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg)
![M0110A](http://i.imgur.com/HuHOEoHm.jpg) ![M0110A](http://i.imgur.com/HuHOEoHm.jpg)
@ -31,7 +31,7 @@ Note that original cable used with Mac is **straight** while phone handset cable
<http://en.wikipedia.org/wiki/Modular_connector#4P4C> <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
Close-up pic of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge.
[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) [![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1)
[Teensy]: http://www.pjrc.com/teensy/ [Teensy]: http://www.pjrc.com/teensy/
@ -43,12 +43,12 @@ Close-up pic of handset cable. You can see one end of plug has reverse color cod
![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) ![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
### Pull-up Registor ### Pull-up Resistor
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.
Building Frimware Building Firmware
----------------- -----------------
To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration.

View File

@ -16,7 +16,7 @@ Connector
(receptacle) (receptacle)
Wiring: You can change this with ediging config.h. Wiring: You can change this with editing config.h.
Pin mini DIN MCU Pin mini DIN MCU
---------------------------------- ----------------------------------
@ -34,7 +34,7 @@ Wiring: You can change this with ediging config.h.
Protocol Protocol
-------- --------
Singnal: Asynchronous, Positive logic, 19200baud, Least bit first Signal: Asynchronous, Positive logic, 19200baud, Least bit first
Frame format: 1-Start bit(Lo), 8-Data bits, Odd-Parity, 1-Stop bit Frame format: 1-Start bit(Lo), 8-Data bits, Odd-Parity, 1-Stop bit
This converter uses software method for testing purpose. AVR UART engine will work better. This converter uses software method for testing purpose. AVR UART engine will work better.

View File

@ -12,7 +12,7 @@ Following three methods are used to implement PS/2 signal handling.
### Interrupt driven(ps2_interrupt.c) ### Interrupt driven(ps2_interrupt.c)
Uses pin interrupt to detect falling edge of clock line. Uses pin interrupt to detect falling edge of clock line.
### USART hardware module(ps2_usart.c) ### USART hardware module(ps2_usart.c)
Uses AVR USART engine to recevie PS/2 signal. Uses AVR USART engine to receive PS/2 signal.
To select method edit Makefile. To select method edit Makefile.
@ -31,7 +31,7 @@ In case of Teensy2.0(ATMega32U4):
To change pin configuration edit config.h. To change pin configuration edit config.h.
Build Frimware Build Firmware
-------------- --------------
Just run `make`: Just run `make`:

View File

@ -34,11 +34,11 @@ Connector
Protocol Protocol
-------- --------
Singnal: Asynchronous, Negative logic, 1200baud, No Flow control Signal: Asynchronous, Negative logic, 1200baud, No Flow control
Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
AVR USART engine expects positive logic while Sun keyboard signal is negative. AVR USART engine expects positive logic while Sun keyboard signal is negative.
To use AVR UART engine you need exteral inverter in front of RX and TX pin. To use AVR UART engine you need external inverter in front of RX and TX pin.
Otherwise you can software serial routine to communicate the keyboard. Otherwise you can software serial routine to communicate the keyboard.
This converter uses software method, you doesn't need any inverter part. This converter uses software method, you doesn't need any inverter part.

View File

@ -6,7 +6,7 @@ Hardware requirement
Arduino Leonardo Arduino Leonardo
http://arduino.cc/en/Main/ArduinoBoardLeonardo http://arduino.cc/en/Main/ArduinoBoardLeonardo
Circuit@Home USB Host Sheild 2.0 Circuit@Home USB Host Shield 2.0
http://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino http://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino

View File

@ -12,7 +12,7 @@ X68000 keyboard has ALPS linear switches.
Hardware Hardware
-------- --------
Target MCU is ATMega32u4 but other USB capable AVR will also work. Target MCU is ATMega32u4 but other USB capable AVR will also work.
You can use PJRC Teensy as dev board. You can use PJRC Teensy as development board.
http://www.pjrc.com/teensy/ http://www.pjrc.com/teensy/
Wiring: Wiring:
@ -83,7 +83,7 @@ bit 6-0 following scan code
Data from computer Data from computer
------------------ ------------------
- LED contorol ON/OFF(0/1) - LED control ON/OFF(0/1)
bit 7 1(fixed) bit 7 1(fixed)
bit 6 全角 bit 6 全角
bit 5 ひらがな bit 5 ひらがな