#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = hhkb_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap_common.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
main.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_hhkb.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
# PJRC Teensy++ 2.0 | |||||
#MCU = at90usb1286 | |||||
# TMK Alt Controller or PJRC Teensy 2.0 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task | |||||
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 (TMK Alt Controller) | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = yes # Console for debug | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk | |||||
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION | |||||
debug-on: all | |||||
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT | |||||
debug-off: all |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0xCAFE | |||||
#define DEVICE_VER 0x0104 | |||||
#define MANUFACTURER t.m.k. | |||||
#define PRODUCT HHKB mod | |||||
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 8 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||||
/* period of tapping(ms) */ | |||||
#define TAPPING_TERM 300 | |||||
/* tap count needed for toggling a feature */ | |||||
#define TAPPING_TOGGLE 5 | |||||
/* Oneshot timeout(ms) */ | |||||
#define ONESHOT_TIMEOUT 300 | |||||
/* Boot Magic salt key: Space */ | |||||
#define BOOTMAGIC_KEY_SALT KC_FN6 | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
/* | |||||
Copyright 2012,2013 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <stdint.h> | |||||
#include "action.h" | |||||
#include <avr/pgmspace.h> | |||||
#include "keymap_common.h" | |||||
/* translates key to keycode */ | |||||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) | |||||
{ | |||||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||||
} | |||||
/* translates Fn keycode to action */ | |||||
action_t keymap_fn_to_action(uint8_t keycode) | |||||
{ | |||||
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; | |||||
} |
/* | |||||
Copyright 2012,2013 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef KEYMAP_COMMON_H | |||||
#define KEYMAP_COMMON_H | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include "keycode.h" | |||||
#include "action.h" | |||||
#include "action_code.h" | |||||
#include "action_layer.h" | |||||
#include "action_macro.h" | |||||
#include "action_util.h" | |||||
#include "report.h" | |||||
#include "host.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "keymap.h" | |||||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; | |||||
extern const uint16_t fn_actions[]; | |||||
#define KEYMAP( \ | |||||
K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ | |||||
K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ | |||||
K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ | |||||
K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ | |||||
K35, K36, K37, K57, K56 \ | |||||
) \ | |||||
{ \ | |||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ | |||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ | |||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ | |||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ | |||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ | |||||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ | |||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \ | |||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \ | |||||
} | |||||
#endif |
/* | |||||
* Hasu: my personal keymap | |||||
*/ | |||||
#include "keymap_common.h" | |||||
#ifdef KEYMAP_SECTION_ENABLE | |||||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { | |||||
#else | |||||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { | |||||
#endif | |||||
/* Layer 0: Default Layer | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Fn6 | | |||||
* |-----------------------------------------------------------| | |||||
* |Fn7 | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1| | |||||
* `-----------------------------------------------------------' | |||||
* |Gui|Alt | Fn4 |Fn5 |Gui| | |||||
* `-------------------------------------------' | |||||
*/ | |||||
[0] = \ | |||||
KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \ | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ | |||||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \ | |||||
FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ | |||||
LGUI,LALT, FN4, FN5, RGUI), | |||||
/* Layer 1: HHKB mode[HHKB Fn] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | | +| -|End|PgD|Dow|Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui|Alt | Space |Alt |Gui| | |||||
* `-------------------------------------------' | |||||
*/ | |||||
[1] = \ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \ | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ | |||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \ | |||||
LGUI,LALT, SPC, RALT,RGUI), | |||||
/* Layer 2: Vi mode[Slash] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui|Alt | Space |Alt |Gui| | |||||
* `-------------------------------------------' | |||||
*/ | |||||
[2] = \ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ | |||||
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,RSFT,NO, \ | |||||
LGUI,LALT, SPC, RALT,RGUI), | |||||
/* Layer 3: Mouse mode(IJKL)[Semicolon] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui |Alt | Mb1 |Fn |Fn | | |||||
* `--------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8 | |||||
*/ | |||||
[3] = \ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \ | |||||
LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ | |||||
LGUI,LALT, BTN1, TRNS,TRNS), | |||||
/* Layer 5: Mouse mode(IJKL)[Space] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui |Alt | Mb1 |Fn |Fn | | |||||
* `--------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8 | |||||
*/ | |||||
[4] = \ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \ | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ | |||||
LGUI,LALT, TRNS, TRNS,TRNS), | |||||
#if 0 | |||||
/* Layer 3: Mouse mode(HJKL)[Semicolon] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | | | | | |MwL|MwD|MwU|MwR| | | |Backs| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui |Alt | Mb1 |Alt |Fn0| | |||||
* `--------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel | |||||
*/ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
TAB, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, \ | |||||
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \ | |||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,SLSH,RSFT,NO, \ | |||||
LGUI,LALT, BTN1, RALT,TRNS), | |||||
/* Layer4: Mouse mode(HJKL)[Space] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | | | | | |MwL|MwD|MwU|MwR| |Wbk|Wfr|Alt-T| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui |Alt | Fn0 |Alt |Fn0| | |||||
* `--------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel | |||||
*/ | |||||
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ | |||||
FN8, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, WBAK,WFWD,FN8, \ | |||||
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ | |||||
LGUI,LALT, TRNS, RALT,RGUI), | |||||
#endif | |||||
#if 0 | |||||
/* Layer x: Matias half-qwerty keyboard style[Space] | |||||
* ,-----------------------------------------------------------. | |||||
* | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc| | |||||
* |-----------------------------------------------------------| | |||||
* |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab | | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | | | |||||
* `-----------------------------------------------------------' | |||||
* |Gui |Alt | Fn0 |Alt |Gui| | |||||
* `--------------------------------------------' | |||||
*/ | |||||
KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \ | |||||
BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \ | |||||
LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \ | |||||
LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \ | |||||
LGUI,LALT, TRNS, RALT,RGUI), | |||||
#endif | |||||
}; | |||||
/* id for user defined functions */ | |||||
enum function_id { | |||||
LSHIFT_LPAREN, | |||||
}; | |||||
enum macro_id { | |||||
HELLO, | |||||
VOLUP, | |||||
ALT_TAB, | |||||
}; | |||||
/* | |||||
* Fn action definition | |||||
*/ | |||||
#ifdef KEYMAP_SECTION_ENABLE | |||||
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { | |||||
#else | |||||
const uint16_t fn_actions[] PROGMEM = { | |||||
#endif | |||||
[0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used) | |||||
[1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps) | |||||
[2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* | |||||
[3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* | |||||
[4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space | |||||
[5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL) | |||||
[6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter | |||||
[7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift | |||||
[8] = ACTION_MACRO(ALT_TAB), // Application switching | |||||
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace | |||||
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc | |||||
// [x] = ACTION_FUNCTION_TAP(LSHIFT_LPAREN), // Function: LShift with tap '(' | |||||
// [x] = ACTION_MACRO(HELLO), // Macro: say hello | |||||
// [x] = ACTION_MACRO(VOLUP), // Macro: media key | |||||
}; | |||||
/* | |||||
* Macro definition | |||||
*/ | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||||
{ | |||||
switch (id) { | |||||
case HELLO: | |||||
return (record->event.pressed ? | |||||
MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) : | |||||
MACRO_NONE ); | |||||
case VOLUP: | |||||
return (record->event.pressed ? | |||||
MACRO( D(VOLU), U(VOLU), END ) : | |||||
MACRO_NONE ); | |||||
case ALT_TAB: | |||||
return (record->event.pressed ? | |||||
MACRO( D(LALT), D(TAB), END ) : | |||||
MACRO( U(TAB), END )); | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
/* | |||||
* user defined action function | |||||
*/ | |||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) | |||||
{ | |||||
if (record->event.pressed) dprint("P"); else dprint("R"); | |||||
dprintf("%d", record->tap.count); | |||||
if (record->tap.interrupted) dprint("i"); | |||||
dprint("\n"); | |||||
switch (id) { | |||||
case LSHIFT_LPAREN: | |||||
// Shift parentheses example: LShft + tap '(' | |||||
// http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses | |||||
// http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899 | |||||
if (record->event.pressed) { | |||||
if (record->tap.count > 0 && !record->tap.interrupted) { | |||||
if (record->tap.interrupted) { | |||||
dprint("tap interrupted\n"); | |||||
register_mods(MOD_BIT(KC_LSHIFT)); | |||||
} | |||||
} else { | |||||
register_mods(MOD_BIT(KC_LSHIFT)); | |||||
} | |||||
} else { | |||||
if (record->tap.count > 0 && !(record->tap.interrupted)) { | |||||
add_weak_mods(MOD_BIT(KC_LSHIFT)); | |||||
send_keyboard_report(); | |||||
register_code(KC_9); | |||||
unregister_code(KC_9); | |||||
del_weak_mods(MOD_BIT(KC_LSHIFT)); | |||||
send_keyboard_report(); | |||||
record->tap.count = 0; // ad hoc: cancel tap | |||||
} else { | |||||
unregister_mods(MOD_BIT(KC_LSHIFT)); | |||||
} | |||||
} | |||||
break; | |||||
} | |||||
} |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include "stdint.h" | |||||
#include "led.h" | |||||
/* HHKB has no LEDs */ | |||||
void led_set(uint8_t usb_led) | |||||
{ | |||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||||
DDRD |= (1<<6); | |||||
PORTD |= (1<<6); | |||||
} else { | |||||
DDRD |= (1<<6); | |||||
PORTD &= ~(1<<6); | |||||
} | |||||
} |
#include <avr/io.h> | |||||
#include <avr/power.h> | |||||
#include <avr/wdt.h> | |||||
#include "lufa.h" | |||||
#include "print.h" | |||||
#include "sendchar.h" | |||||
static void SetupHardware(void) | |||||
{ | |||||
/* Disable watchdog if enabled by bootloader/fuses */ | |||||
MCUSR &= ~(1 << WDRF); | |||||
wdt_disable(); | |||||
/* Disable clock division */ | |||||
clock_prescale_set(clock_div_1); | |||||
// Leonardo needs. Without this USB device is not recognized. | |||||
USB_Disable(); | |||||
USB_Init(); | |||||
// for Console_Task | |||||
USB_Device_EnableSOFEvents(); | |||||
print_set_sendchar(sendchar); | |||||
} | |||||
int main(void) __attribute__ ((weak)); | |||||
int main(void) | |||||
{ | |||||
SetupHardware(); | |||||
sei(); | |||||
/* wait for USB startup & debug output */ | |||||
while (USB_DeviceState != DEVICE_STATE_Configured) { | |||||
#if defined(INTERRUPT_CONTROL_ENDPOINT) | |||||
; | |||||
#else | |||||
USB_USBTask(); | |||||
#endif | |||||
} | |||||
print("USB configured.\n"); | |||||
/* init modules */ | |||||
keyboard_init(); | |||||
host_set_driver(&lufa_driver); | |||||
#ifdef SLEEP_LED_ENABLE | |||||
sleep_led_init(); | |||||
#endif | |||||
print("Keyboard start.\n"); | |||||
while (1) { | |||||
while (USB_DeviceState == DEVICE_STATE_Suspended) { | |||||
suspend_power_down(); | |||||
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { | |||||
USB_Device_SendRemoteWakeup(); | |||||
} | |||||
} | |||||
keyboard_task(); | |||||
#if !defined(INTERRUPT_CONTROL_ENDPOINT) | |||||
USB_USBTask(); | |||||
#endif | |||||
} | |||||
} | |||||
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "timer.h" | |||||
#include "matrix.h" | |||||
// Timer resolution check | |||||
#if (1000000/TIMER_RAW_FREQ > 20) | |||||
# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." | |||||
#endif | |||||
// matrix state buffer(1:on, 0:off) | |||||
static matrix_row_t *matrix; | |||||
static matrix_row_t *matrix_prev; | |||||
static matrix_row_t _matrix0[MATRIX_ROWS]; | |||||
static matrix_row_t _matrix1[MATRIX_ROWS]; | |||||
// Matrix I/O ports | |||||
// | |||||
// row: HC4051[A,B,C] selects scan row0-7 | |||||
// col: LS145[A,B,C,D] selects scan col0-7 and enable(D) | |||||
// key: on: 0/off: 1 | |||||
// prev: unknown: output previous key state(negated)? | |||||
#if defined(__AVR_AT90USB1286__) | |||||
// Ports for Teensy++ | |||||
// row: PB0-2 | |||||
// col: PB3-5,6 | |||||
// key: PE6(pull-uped) | |||||
// prev: PE7 | |||||
#define KEY_INIT() do { \ | |||||
DDRB |= 0x7F; \ | |||||
DDRE |= (1<<7); \ | |||||
DDRE &= ~(1<<6); \ | |||||
PORTE |= (1<<6); \ | |||||
} while (0) | |||||
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ | |||||
(((COL) & 0x07)<<3) | \ | |||||
((ROW) & 0x07)) | |||||
#define KEY_ENABLE() (PORTB &= ~(1<<6)) | |||||
#define KEY_UNABLE() (PORTB |= (1<<6)) | |||||
#define KEY_STATE() (PINE & (1<<6)) | |||||
#define KEY_PREV_ON() (PORTE |= (1<<7)) | |||||
#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) | |||||
#define KEY_POWER_ON() | |||||
#define KEY_POWER_OFF() | |||||
#elif defined(__AVR_ATmega32U4__) | |||||
// Ports for my designed Alt Controller PCB | |||||
// row: PB0-2 | |||||
// col: PB3-5,6 | |||||
// key: PD7(pull-uped) | |||||
// prev: PB7 | |||||
// power: PD4(L:off/H:on) | |||||
#define KEY_INIT() do { \ | |||||
DDRB = 0xFF; \ | |||||
PORTB = 0x00; \ | |||||
DDRD &= ~0x80; \ | |||||
PORTD |= 0x80; \ | |||||
/* keyswitch board power on */ \ | |||||
DDRD |= (1<<4); \ | |||||
PORTD |= (1<<4); \ | |||||
KEY_UNABLE(); \ | |||||
KEY_PREV_OFF(); \ | |||||
} while (0) | |||||
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ | |||||
(((COL) & 0x07)<<3) | \ | |||||
((ROW) & 0x07)) | |||||
#define KEY_ENABLE() (PORTB &= ~(1<<6)) | |||||
#define KEY_UNABLE() (PORTB |= (1<<6)) | |||||
#define KEY_STATE() (PIND & (1<<7)) | |||||
#define KEY_PREV_ON() (PORTB |= (1<<7)) | |||||
#define KEY_PREV_OFF() (PORTB &= ~(1<<7)) | |||||
#define KEY_POWER_ON() | |||||
#define KEY_POWER_OFF() | |||||
/* | |||||
#define KEY_POWER_ON() do { \ | |||||
KEY_INIT(); \ | |||||
PORTD |= (1<<4); \ | |||||
_delay_ms(1); \ | |||||
} while (0) | |||||
#define KEY_POWER_OFF() do { \ | |||||
PORTD &= ~(1<<4); \ | |||||
DDRB &= ~0xFF; \ | |||||
PORTB &= ~0xFF; \ | |||||
DDRB &= ~0x80; \ | |||||
PORTB &= ~0x80; \ | |||||
} while (0) | |||||
*/ | |||||
#elif defined(__AVR_ATmega328P__) | |||||
// Ports for V-USB | |||||
// key: PB0(pull-uped) | |||||
// prev: PB1 | |||||
// row: PB2-4 | |||||
// col: PC0-2,3 | |||||
// power: PB5(Low:on/Hi-z:off) | |||||
#define KEY_INIT() do { \ | |||||
DDRB |= 0x3E; \ | |||||
DDRB &= ~(1<<0); \ | |||||
PORTB |= 1<<0; \ | |||||
DDRC |= 0x0F; \ | |||||
KEY_UNABLE(); \ | |||||
KEY_PREV_OFF(); \ | |||||
} while (0) | |||||
#define KEY_SELECT(ROW, COL) do { \ | |||||
PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ | |||||
PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ | |||||
} while (0) | |||||
#define KEY_ENABLE() (PORTC &= ~(1<<3)) | |||||
#define KEY_UNABLE() (PORTC |= (1<<3)) | |||||
#define KEY_STATE() (PINB & (1<<0)) | |||||
#define KEY_PREV_ON() (PORTB |= (1<<1)) | |||||
#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) | |||||
// Power supply switching | |||||
#define KEY_POWER_ON() do { \ | |||||
KEY_INIT(); \ | |||||
PORTB &= ~(1<<5); \ | |||||
_delay_ms(1); \ | |||||
} while (0) | |||||
#define KEY_POWER_OFF() do { \ | |||||
DDRB &= ~0x3F; \ | |||||
PORTB &= ~0x3F; \ | |||||
DDRC &= ~0x0F; \ | |||||
PORTC &= ~0x0F; \ | |||||
} while (0) | |||||
#else | |||||
# error "define code for matrix scan" | |||||
#endif | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
#ifdef DEBUG | |||||
debug_enable = true; | |||||
debug_keyboard = true; | |||||
#endif | |||||
KEY_INIT(); | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; | |||||
matrix = _matrix0; | |||||
matrix_prev = _matrix1; | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
uint8_t *tmp; | |||||
tmp = matrix_prev; | |||||
matrix_prev = matrix; | |||||
matrix = tmp; | |||||
KEY_POWER_ON(); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
for (uint8_t col = 0; col < MATRIX_COLS; col++) { | |||||
KEY_SELECT(row, col); | |||||
_delay_us(40); | |||||
// Not sure this is needed. This just emulates HHKB controller's behaviour. | |||||
if (matrix_prev[row] & (1<<col)) { | |||||
KEY_PREV_ON(); | |||||
} | |||||
_delay_us(7); | |||||
// NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE. | |||||
// If V-USB interrupts in this section we could lose 40us or so | |||||
// and would read invalid value from KEY_STATE. | |||||
uint8_t last = TIMER_RAW; | |||||
KEY_ENABLE(); | |||||
// Wait for KEY_STATE outputs its value. | |||||
// 1us was ok on one HHKB, but not worked on another. | |||||
// no wait doesn't work on Teensy++ with pro(1us works) | |||||
// no wait does work on tmk PCB(8MHz) with pro2 | |||||
// 1us wait does work on both of above | |||||
// 1us wait doesn't work on tmk(16MHz) | |||||
// 5us wait does work on tmk(16MHz) | |||||
// 5us wait does work on tmk(16MHz/2) | |||||
// 5us wait does work on tmk(8MHz) | |||||
// 10us wait does work on Teensy++ with pro | |||||
// 10us wait does work on 328p+iwrap with pro | |||||
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan) | |||||
_delay_us(5); | |||||
if (KEY_STATE()) { | |||||
matrix[row] &= ~(1<<col); | |||||
} else { | |||||
matrix[row] |= (1<<col); | |||||
} | |||||
// Ignore if this code region execution time elapses more than 20us. | |||||
// MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us] | |||||
// MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b) | |||||
if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) { | |||||
matrix[row] = matrix_prev[row]; | |||||
} | |||||
KEY_PREV_OFF(); | |||||
KEY_UNABLE(); | |||||
// NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. | |||||
// This takes 25us or more to make sure KEY_STATE returns to idle state. | |||||
_delay_us(150); | |||||
} | |||||
} | |||||
KEY_POWER_OFF(); | |||||
return 1; | |||||
} | |||||
bool matrix_is_modified(void) | |||||
{ | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
if (matrix[i] != matrix_prev[i]) | |||||
return true; | |||||
} | |||||
return false; | |||||
} | |||||
inline | |||||
bool matrix_has_ghost(void) | |||||
{ | |||||
return false; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & (1<<col)); | |||||
} | |||||
inline | |||||
matrix_row_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 01234567\n"); | |||||
for (uint8_t row = 0; row < matrix_rows(); row++) { | |||||
xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row))); | |||||
} | |||||
} |
#include "host.h" | |||||
#include "host_driver.h" | |||||
#include "rn42.h" | |||||
/* Host driver */ | |||||
static uint8_t keyboard_leds(void); | |||||
static void send_keyboard(report_keyboard_t *report); | |||||
static void send_mouse(report_mouse_t *report); | |||||
static void send_system(uint16_t data); | |||||
static void send_consumer(uint16_t data); | |||||
host_driver_t rn42_driver = { | |||||
keyboard_leds, | |||||
send_keyboard, | |||||
send_mouse, | |||||
send_system, | |||||
send_consumer | |||||
}; | |||||
static uint8_t keyboard_leds(void) { return 0; } | |||||
static void send_keyboard(report_keyboard_t *report) | |||||
{ | |||||
} | |||||
static void send_mouse(report_mouse_t *report) | |||||
{ | |||||
} | |||||
static void send_system(uint16_t data) | |||||
{ | |||||
} | |||||
static void send_consumer(uint16_t data) | |||||
{ | |||||
} |
#ifndef RN42_H | |||||
#define RN42_H | |||||
host_driver_t rn42_driver; | |||||
#endif |