diff --git a/keyboard/staryu/Makefile_lite b/keyboard/staryu/Makefile_lite new file mode 100644 index 00000000..bf817dd2 --- /dev/null +++ b/keyboard/staryu/Makefile_lite @@ -0,0 +1,157 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = staryu_lite_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c \ + ledmap.c \ + light_ws2812.c \ + rgb.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_lite.c $(SRC) +endif + + +CONFIG_H = config_lite.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega16u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +#CONSOLE_ENABLE = yes # Console for debug(+400) +#COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover +#USB_6KRO_ENABLE = yes # USB 6key Rollover +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_USART= yes +#PS2_USE_BUSYWAIT = yes +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom +#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight +FADING_LED_ENABLE = yes # Enable fading backlight +BREATHING_LED_ENABLE = yes # Enable breathing backlight +#LEDMAP_ENABLE = yes # Enable LED mapping +#LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/staryu/config_lite.h b/keyboard/staryu/config_lite.h new file mode 100644 index 00000000..3a6e3776 --- /dev/null +++ b/keyboard/staryu/config_lite.h @@ -0,0 +1,80 @@ +/* +Copyright 2015 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8133 +#define PRODUCT_ID 0x0120 +#define DEVICE_VER 0x0103 +#define MANUFACTURER Noukensha +#define PRODUCT Staryu +#define DESCRIPTION t.m.k. keyboard firmware for Staryu + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 5 + +/* keymap in eeprom */ +#define FN_ACTIONS_COUNT 32 +#define KEYMAPS_COUNT 32 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 8 + +/* number of LEDs */ +#define LED_COUNT 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +#define NO_ACTION_TAPPING +#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/staryu/keymap_lite.c b/keyboard/staryu/keymap_lite.c new file mode 100644 index 00000000..892b8da4 --- /dev/null +++ b/keyboard/staryu/keymap_lite.c @@ -0,0 +1,89 @@ +/* +Copyright 2015 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "keycode.h" +#include "action.h" +#include "keymap_common.h" + +// Default +#ifdef KEYMAP_SECTION_ENABLE +const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { +#endif + /* Keymap 0 + * ,-----------. + * | |Up |Fn0| + * |---+---+---| + * |Lef|Dow|Rig| + * `-----------' + */ + KEYMAP( UP, FN0, LEFT,DOWN,RGHT ), + /* Keymap 1 + * ,-----------. + * | |PgU|Fn1| + * |---+---+---| + * |Hom|PgD|End| + * `-----------' + */ + KEYMAP( PGUP,FN1, HOME,PGDN,END ), + /* Keymap 2 + * ,-----------. + * | |Sel|Fn2| + * |---+---+---| + * |Pre|Pla|Nex| + * `-----------' + */ + KEYMAP( MSEL,FN2, MPRV,MPLY,MNXT ), + /* Keymap 3 + * ,-----------. + * | |Fn5|Fn3| + * |---+---+---| + * |Fn6|Fn4|Fn7| + * `-----------' + */ + KEYMAP( FN5, FN3, FN6, FN4, FN7 ), +}; + +/* + * Fn action definition + */ +#ifdef KEYMAP_SECTION_ENABLE +const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = { +#else +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_DEFAULT_LAYER_SET(1), + [1] = ACTION_DEFAULT_LAYER_SET(2), + [2] = ACTION_DEFAULT_LAYER_SET(3), + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_BACKLIGHT_TOGGLE(), + [5] = ACTION_BACKLIGHT_STEP(), + [6] = ACTION_BACKLIGHT_DECREASE(), + [7] = ACTION_BACKLIGHT_INCREASE() +#endif +}; + +#ifdef KEYMAP_IN_EEPROM_ENABLE +uint16_t keys_count(void) { + return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS; +} + +uint16_t fn_actions_count(void) { + return sizeof(fn_actions) / sizeof(fn_actions[0]); +} +#endif