diff --git a/keyboard/RedScarfII/Makefile b/keyboard/RedScarfII/Makefile new file mode 100644 index 00000000..d007c36e --- /dev/null +++ b/keyboard/RedScarfII/Makefile @@ -0,0 +1,147 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = RedScarfII_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_default.c $(SRC) +endif + + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_BUSYWAIT = yes +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_EX_ENABLE = yes # External keymap in eeprom +KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +BREATHING_LED_ENABLE = yes # Enable breathing backlight + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/RedScarfII/Makefile.pjrc b/keyboard/RedScarfII/Makefile.pjrc new file mode 100644 index 00000000..3bfcc23f --- /dev/null +++ b/keyboard/RedScarfII/Makefile.pjrc @@ -0,0 +1,113 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = RedScarfII__pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_default.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_EX_ENABLE = yes # External keymap in eeprom +KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +BREATHING_LED_ENABLE = yes # Enable breathing backlight + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/RedScarfII/backlight.c b/keyboard/RedScarfII/backlight.c new file mode 100644 index 00000000..63931eff --- /dev/null +++ b/keyboard/RedScarfII/backlight.c @@ -0,0 +1,105 @@ +/* +Copyright 2013,2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include +#include "backlight.h" +#include "breathing_led.h" + +#ifdef BACKLIGHT_ENABLE + +void backlight_enable(void); +void backlight_disable(void); +inline void backlight_set_raw(uint8_t raw); + +static const uint8_t backlight_table[] PROGMEM = { + 0, 16, 128, 255 +}; + +/* Backlight pin configuration + * PWM: PB7(OC1C) + */ +void backlight_enable(void) +{ + // Turn on PWM + DDRB |= (1< 0) { + backlight_enable(); + backlight_set_raw(pgm_read_byte(&backlight_table[level])); + } + else { + backlight_disable(); + } +#endif +} + +#ifdef BREATHING_LED_ENABLE +void breathing_led_set_raw(uint8_t raw) +{ + backlight_set_raw(raw); +} +#endif + +inline void backlight_set_raw(uint8_t raw) +{ + OCR1C = raw; +} + +#endif diff --git a/keyboard/RedScarfII/config.h b/keyboard/RedScarfII/config.h new file mode 100644 index 00000000..90146375 --- /dev/null +++ b/keyboard/RedScarfII/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5253 +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Young Pioneers +#define PRODUCT Red Scarf II +#define DESCRIPTION t.m.k. keyboard firmware for Red Scarf II + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 18 + +/* keymap in eeprom */ +#define FN_ACTIONS_COUNT 32 +#define KEYMAPS_COUNT 8 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* number of backlight levels */ +#ifdef BREATHING_LED_ENABLE +#define BACKLIGHT_LEVELS 6 +#else +#define BACKLIGHT_LEVELS 3 +#endif + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/RedScarfII/keymap_common.c b/keyboard/RedScarfII/keymap_common.c new file mode 100644 index 00000000..ae934eea --- /dev/null +++ b/keyboard/RedScarfII/keymap_common.c @@ -0,0 +1,49 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "keymap_common.h" + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) +{ +#ifndef KEYMAP_EX_ENABLE + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +#else + return eeconfig_read_keymap_key(layer, key.row, key.col); +#endif +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t) { +#ifndef KEYMAP_EX_ENABLE + .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) +#else + .code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) +#endif + }; +} + +#ifdef KEYMAP_EX_ENABLE +const uint8_t* keymaps_pointer(void) { + return (const uint8_t*)keymaps; +} + +const uint16_t* fn_actions_pointer(void) { + return fn_actions; +} +#endif diff --git a/keyboard/RedScarfII/keymap_common.h b/keyboard/RedScarfII/keymap_common.h new file mode 100644 index 00000000..d478042b --- /dev/null +++ b/keyboard/RedScarfII/keymap_common.h @@ -0,0 +1,86 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include +#include +#include +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" +#include "keymap_ex.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +/* RedScarfII keymap definition macro + * K3B and K2M are extra keys for ISO + */ +#define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{ \ + { KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F, KC_##K0G, KC_##K0H, KC_##K0I, KC_##K0J, KC_##K0K, KC_##K0L, KC_##K0M, KC_##K0N, KC_##K0P, KC_##K0Q, KC_##K0R, KC_##K0S }, \ + { KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_##K1M, KC_##K1N, KC_##K1P, KC_##K1Q, KC_##K1R, KC_##K1S }, \ + { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2P, KC_##K2Q, KC_##K2R, KC_##K2S }, \ + { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3P, KC_##K3Q, KC_##K3R, KC_##K3S }, \ + { KC_##K4A, KC_##K4B, KC_##K4C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4P, KC_##K4Q, KC_##K4R, KC_##K4S }, \ + { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ +} + +/* No extra F1-F10 keys */ +#define KEYMAP_NORMAL( \ + K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ + K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, K1S, \ + K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2P, K2Q, K2R, K2S, \ + K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, K3S, \ + K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ +) KEYMAP( \ + NO, NO, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ + NO, NO, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, K1S, \ + NO, NO, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2P, K2Q, K2R, K2S, \ + NO, NO, K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, K3S, \ + NO, NO, K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ +) + +/* ANSI valiant. No extra keys for ISO */ +#define KEYMAP_ANSI( \ + K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ + K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, \ + K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, K2Q, K2R, K2S, \ + K3A, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, \ + K4A, K4B, K4C, K4I, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ +) KEYMAP_NORMAL( \ + K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ + K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, NO, \ + K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, NO, K2N, K2P, K2Q, K2R, K2S, \ + K3A, NO, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, NO, \ + K4A, K4B, K4C, K4I, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ +) + +#endif diff --git a/keyboard/RedScarfII/keymap_default.c b/keyboard/RedScarfII/keymap_default.c new file mode 100644 index 00000000..aa3011f3 --- /dev/null +++ b/keyboard/RedScarfII/keymap_default.c @@ -0,0 +1,92 @@ +#include "keymap_common.h" + +// Default +#ifdef KEYMAP_SECTION_ENABLE +const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { +#endif + /* Keymap 0: Default Layer + * ,-----------------------------------------------------------------------------------. + * | F1| F6|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Num| /| *| -| + * |---+---+-----------------------------------------------------------+---+---+---+---| + * | F2| F7|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| 7| 8| 9| | + * |---+---+-----------------------------------------------------------+---+---+---| +| + * | F3| F8|Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | 4| 5| 6| | + * |---+---+-----------------------------------------------------------+---+---+---+---| + * | F4| F9|Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| 1| 2| 3| | + * |---+---+-----------------------------------------------------------+---+---+---|Ent| + * | F5|F10|Ctrl|Gui |Alt | Space |Alt |Gui |Fn0 |Ctrl| 0| 0| .| | + * `-----------------------------------------------------------------------------------' + */ + KEYMAP( + F1, F6, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,NLCK,PSLS,PAST,PMNS, \ + F2, F7, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS,P7, P8, P9, PPLS, \ + F3, F8, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,GRV, ENT, P4, P5, P6, PPLS, \ + F4, F9, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,FN0, P1, P2, P3, PENT, \ + F5, F10, LCTL,LGUI,LALT, SPC, RALT,FN0, RGUI,RCTL,P0, P0, PDOT,PENT ), + /* Keymap 1: Fn Layer + * ,-----------------------------------------------------------------------------------. + * | | | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | | | | | + * |---+---+-----------------------------------------------------------+---+---+---+---| + * | | | | |Up | | | |Cal| |Ins| |Psc|Slk|Pau| | | | | | + * |---+---+-----------------------------------------------------------|---+---+---| | + * | | | |Lef|Dow|Rig| | | | | | |Hom|PgU| | | | | | + * |---+---+-----------------------------------------------------------|---+---+---+---| + * | | | | |App|Fn1|Fn2|Fn3|VoD|VoU|Mut|End|PgD| | | | | | | + * |---+---+-----------------------------------------------------------+---+---+---| | + * | | | | | | Fn4 | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ + KEYMAP( + TRNS,TRNS,GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,UP, TRNS,TRNS,TRNS,CALC,TRNS,INS, TRNS,PSCR,SLCK,PAUS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,APP, FN1, FN2, FN3, VOLD,VOLU,MUTE,END, PGDN,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS, FN4, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS ), + /* Keymap 2: Arrow key Overlayer + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | | | + * |---+---+-----------------------------------------------------------+---+---+---+---| + * | | | | | | | | | | | | | | | | | | | | | + * |---+---+-----------------------------------------------------------+---+---+---| | + * | | | | | | | | | | | | | | | | | | | | + * |---+---+-----------------------------------------------------------+---+---+---+---| + * | | | | | | | | | | | | | | | |Up | | | + * |---+---+-----------------------------------------------------------+---+---+---| | + * | | | | | | | | | | |Lef|Dow|Rig| | + * `-----------------------------------------------------------------------------------' + */ + KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP, TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,LEFT,DOWN,RGHT,TRNS ), +}; + +/* + * Fn action definition + */ +#ifdef KEYMAP_SECTION_ENABLE +const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = { +#else +const uint16_t fn_actions[] PROGMEM = { +#endif + /* Poker2 Layout */ + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_BACKLIGHT_DECREASE(), + [2] = ACTION_BACKLIGHT_TOGGLE(), + [3] = ACTION_BACKLIGHT_INCREASE(), + [4] = ACTION_LAYER_TOGGLE(2) +}; + +#ifdef KEYMAP_EX_ENABLE +uint16_t keys_count(void) { + return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS; +} + +uint16_t fn_actions_count(void) { + return sizeof(fn_actions) / sizeof(fn_actions[0]); +} +#endif diff --git a/keyboard/RedScarfII/led.c b/keyboard/RedScarfII/led.c new file mode 100644 index 00000000..b37729e7 --- /dev/null +++ b/keyboard/RedScarfII/led.c @@ -0,0 +1,48 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + +/* LED pin configuration + * CapsLock: PC7 + * NumLock: PE6 + */ +void led_set(uint8_t usb_led) +{ + if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // disable JTAG + MCUCR = (1<