Merge remote-tracking branch 'upstream/master'
Conflicts: common.mk common/keyboard.c keyboard/gh60/Makefile keyboard/gh60/keymap_hasu.c keyboard/gh60/matrix.c
This commit is contained in:
커밋
5e0eb1ec7d
15
common.mk
15
common.mk
@ -25,6 +25,7 @@ endif
|
||||
ifdef MOUSEKEY_ENABLE
|
||||
SRC += $(COMMON_DIR)/mousekey.c
|
||||
OPT_DEFS += -DMOUSEKEY_ENABLE
|
||||
OPT_DEFS += -DMOUSE_ENABLE
|
||||
endif
|
||||
|
||||
ifdef EXTRAKEY_ENABLE
|
||||
@ -47,20 +48,6 @@ ifdef NKRO_ENABLE
|
||||
OPT_DEFS += -DNKRO_ENABLE
|
||||
endif
|
||||
|
||||
ifdef PS2_MOUSE_ENABLE
|
||||
SRC += $(COMMON_DIR)/ps2.c \
|
||||
$(COMMON_DIR)/ps2_mouse.c
|
||||
OPT_DEFS += -DPS2_MOUSE_ENABLE
|
||||
endif
|
||||
|
||||
ifdef MOUSEKEY_ENABLE
|
||||
OPT_DEFS += -DMOUSE_ENABLE
|
||||
endif
|
||||
|
||||
ifdef PS4_MOUSE_ENABLE
|
||||
OPT_DEFS += -DMOUSE_ENABLE
|
||||
endif
|
||||
|
||||
ifdef SLEEP_LED_ENABLE
|
||||
SRC += $(COMMON_DIR)/sleep_led.c
|
||||
OPT_DEFS += -DSLEEP_LED_ENABLE
|
||||
|
@ -128,6 +128,17 @@ void process_action(keyrecord_t *record)
|
||||
}
|
||||
break;
|
||||
#endif
|
||||
case MODS_TAP_TOGGLE:
|
||||
if (event.pressed) {
|
||||
if (tap_count <= TAPPING_TOGGLE) {
|
||||
register_mods(mods);
|
||||
}
|
||||
} else {
|
||||
if (tap_count < TAPPING_TOGGLE) {
|
||||
unregister_mods(mods);
|
||||
}
|
||||
}
|
||||
break;
|
||||
default:
|
||||
if (event.pressed) {
|
||||
if (tap_count > 0) {
|
||||
@ -485,12 +496,6 @@ void clear_keyboard_but_mods(void)
|
||||
#endif
|
||||
}
|
||||
|
||||
bool sending_anykey(void)
|
||||
{
|
||||
return (has_anykey() || host_mouse_in_use() ||
|
||||
host_last_sysytem_report() || host_last_consumer_report());
|
||||
}
|
||||
|
||||
bool is_tap_key(key_t key)
|
||||
{
|
||||
action_t action = layer_switch_get_action(key);
|
||||
|
@ -64,7 +64,6 @@ void unregister_mods(uint8_t mods);
|
||||
//void set_mods(uint8_t mods);
|
||||
void clear_keyboard(void);
|
||||
void clear_keyboard_but_mods(void);
|
||||
bool sending_anykey(void);
|
||||
void layer_switch(uint8_t new_layer);
|
||||
bool is_tap_key(key_t key);
|
||||
|
||||
|
@ -34,6 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
* ACT_MODS_TAP(001r):
|
||||
* 001r|mods|0000 0000 Modifiers with OneShot
|
||||
* 001r|mods|0000 0001 Modifiers with tap toggle
|
||||
* 001r|mods|0000 00xx (reserved)
|
||||
* 001r|mods| keycode Modifiers with Tap Key(Dual role)
|
||||
*
|
||||
@ -205,12 +206,14 @@ enum mods_bit {
|
||||
};
|
||||
enum mods_codes {
|
||||
MODS_ONESHOT = 0x00,
|
||||
MODS_TAP_TOGGLE = 0x01,
|
||||
};
|
||||
#define ACTION_KEY(key) ACTION(ACT_MODS, (key))
|
||||
#define ACTION_MODS(mods) ACTION(ACT_MODS, (mods&0x1f)<<8 | 0)
|
||||
#define ACTION_MODS_KEY(mods, key) ACTION(ACT_MODS, (mods&0x1f)<<8 | (key))
|
||||
#define ACTION_MODS_TAP_KEY(mods, key) ACTION(ACT_MODS_TAP, (mods&0x1f)<<8 | (key))
|
||||
#define ACTION_MODS_ONESHOT(mods) ACTION(ACT_MODS_TAP, (mods&0x1f)<<8 | MODS_ONESHOT)
|
||||
#define ACTION_MODS(mods) ACTION(ACT_MODS, ((mods)&0x1f)<<8 | 0)
|
||||
#define ACTION_MODS_KEY(mods, key) ACTION(ACT_MODS, ((mods)&0x1f)<<8 | (key))
|
||||
#define ACTION_MODS_TAP_KEY(mods, key) ACTION(ACT_MODS_TAP, ((mods)&0x1f)<<8 | (key))
|
||||
#define ACTION_MODS_ONESHOT(mods) ACTION(ACT_MODS_TAP, ((mods)&0x1f)<<8 | MODS_ONESHOT)
|
||||
#define ACTION_MODS_TAP_TOGGLE(mods) ACTION(ACT_MODS_TAP, ((mods)&0x1f)<<8 | MODS_TAP_TOGGLE)
|
||||
|
||||
|
||||
/*
|
||||
|
@ -18,6 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define ACTION_UTIL_H
|
||||
|
||||
#include <stdint.h>
|
||||
#include "report.h"
|
||||
|
||||
extern report_keyboard_t *keyboard_report;
|
||||
|
||||
|
@ -27,9 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
bool keyboard_nkro = false;
|
||||
#endif
|
||||
|
||||
report_mouse_t mouse_report = {};
|
||||
|
||||
|
||||
static host_driver_t *driver;
|
||||
static uint16_t last_system_report = 0;
|
||||
static uint16_t last_consumer_report = 0;
|
||||
@ -89,11 +86,6 @@ void host_consumer_send(uint16_t report)
|
||||
(*driver->send_consumer)(report);
|
||||
}
|
||||
|
||||
uint8_t host_mouse_in_use(void)
|
||||
{
|
||||
return (mouse_report.buttons | mouse_report.x | mouse_report.y | mouse_report.v | mouse_report.h);
|
||||
}
|
||||
|
||||
uint16_t host_last_sysytem_report(void)
|
||||
{
|
||||
return last_system_report;
|
||||
|
@ -32,9 +32,6 @@ extern "C" {
|
||||
extern bool keyboard_nkro;
|
||||
#endif
|
||||
|
||||
/* report */
|
||||
extern report_mouse_t mouse_report;
|
||||
|
||||
|
||||
/* host driver */
|
||||
void host_set_driver(host_driver_t *driver);
|
||||
@ -47,9 +44,6 @@ void host_mouse_send(report_mouse_t *report);
|
||||
void host_system_send(uint16_t data);
|
||||
void host_consumer_send(uint16_t data);
|
||||
|
||||
/* mouse report utils */
|
||||
uint8_t host_mouse_in_use(void);
|
||||
|
||||
uint16_t host_last_sysytem_report(void);
|
||||
uint16_t host_last_consumer_report(void);
|
||||
|
||||
|
@ -30,9 +30,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include "sendchar.h"
|
||||
#include "bootmagic.h"
|
||||
#include "eeconfig.h"
|
||||
#include "mousekey.h"
|
||||
#include "backlight.h"
|
||||
#include "keymap_ex.h"
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
# include "mousekey.h"
|
||||
#endif
|
||||
#ifdef PS2_MOUSE_ENABLE
|
||||
# include "ps2_mouse.h"
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef MATRIX_HAS_GHOST
|
||||
@ -116,10 +121,16 @@ void keyboard_task(void)
|
||||
action_exec(TICK);
|
||||
|
||||
MATRIX_LOOP_END:
|
||||
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
// mousekey repeat & acceleration
|
||||
mousekey_task();
|
||||
#endif
|
||||
|
||||
#ifdef PS2_MOUSE_ENABLE
|
||||
ps2_mouse_task();
|
||||
#endif
|
||||
|
||||
// update LED
|
||||
if (led_status != host_keyboard_leds()) {
|
||||
led_status = host_keyboard_leds();
|
||||
|
@ -26,6 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
|
||||
|
||||
static report_mouse_t mouse_report = {};
|
||||
static uint8_t mousekey_repeat = 0;
|
||||
static uint8_t mousekey_accel = 0;
|
||||
|
||||
|
@ -526,6 +526,12 @@ Say you want to type 'The', you have to push and hold Shift key before type 't'
|
||||
Oneshot effect is cancel unless following key is pressed down within `ONESHOT_TIMEOUT` of `config.h`. No timeout when it is `0` or not defined.
|
||||
|
||||
|
||||
### 4.4 Tap Toggle Mods
|
||||
Similar to layer tap toggle, this works as a momentary modifier when holding, but toggles on with several taps. A single tap will 'unstick' the modifier again.
|
||||
|
||||
ACTION_MODS_TAP_TOGGLE(MOD_LSFT)
|
||||
|
||||
|
||||
|
||||
|
||||
## 5. Legacy Keymap
|
||||
|
25
protocol.mk
25
protocol.mk
@ -1,2 +1,27 @@
|
||||
PROTOCOL_DIR = protocol
|
||||
|
||||
|
||||
ifdef PS2_MOUSE_ENABLE
|
||||
SRC += $(PROTOCOL_DIR)/ps2_mouse.c
|
||||
OPT_DEFS += -DPS2_MOUSE_ENABLE
|
||||
OPT_DEFS += -DMOUSE_ENABLE
|
||||
endif
|
||||
|
||||
ifdef PS2_USE_BUSYWAIT
|
||||
SRC += protocol/ps2_busywait.c
|
||||
OPT_DEFS += -DPS2_USE_BUSYWAIT
|
||||
endif
|
||||
|
||||
ifdef PS2_USE_INT
|
||||
SRC += protocol/ps2_interrupt.c
|
||||
OPT_DEFS += -DPS2_USE_INT
|
||||
endif
|
||||
|
||||
ifdef PS2_USE_USART
|
||||
SRC += protocol/ps2_usart.c
|
||||
OPT_DEFS += -DPS2_USE_USART
|
||||
endif
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TOP_DIR)/protocol
|
||||
|
27
protocol/bluefruit.mk
Normal file
27
protocol/bluefruit.mk
Normal file
@ -0,0 +1,27 @@
|
||||
BLUEFRUIT_DIR = protocol/bluefruit
|
||||
PJRC_DIR = protocol/pjrc
|
||||
|
||||
SRC += $(BLUEFRUIT_DIR)/main.c \
|
||||
$(BLUEFRUIT_DIR)/bluefruit.c \
|
||||
serial_uart.c \
|
||||
$(PJRC_DIR)/pjrc.c \
|
||||
$(PJRC_DIR)/usb_keyboard.c \
|
||||
$(PJRC_DIR)/usb_debug.c \
|
||||
$(PJRC_DIR)/usb.c
|
||||
|
||||
# Option modules
|
||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
|
||||
SRC += $(PJRC_DIR)/usb_mouse.c
|
||||
endif
|
||||
|
||||
ifdef EXTRAKEY_ENABLE
|
||||
SRC += $(PJRC_DIR)/usb_extra.c
|
||||
endif
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)
|
||||
#VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only
|
||||
VPATH += $(TOP_DIR)/$(PJRC_DIR)
|
||||
|
||||
OPT_DEFS += -DPROTOCOL_BLUEFRUIT
|
||||
OPT_DEFS += -DPROTOCOL_PJRC
|
202
protocol/bluefruit/bluefruit.c
Normal file
202
protocol/bluefruit/bluefruit.c
Normal file
@ -0,0 +1,202 @@
|
||||
/*
|
||||
Bluefruit Protocol for TMK firmware
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include "host.h"
|
||||
#include "report.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "host_driver.h"
|
||||
#include "serial.h"
|
||||
#include "bluefruit.h"
|
||||
|
||||
#define BLUEFRUIT_TRACE_SERIAL 1
|
||||
|
||||
static uint8_t bluefruit_keyboard_leds = 0;
|
||||
|
||||
static void bluefruit_serial_send(uint8_t);
|
||||
|
||||
void bluefruit_keyboard_print_report(report_keyboard_t *report)
|
||||
{
|
||||
if (!debug_keyboard) return;
|
||||
dprintf("keys: "); for (int i = 0; i < REPORT_KEYS; i++) { debug_hex8(report->keys[i]); dprintf(" "); }
|
||||
dprintf(" mods: "); debug_hex8(report->mods);
|
||||
dprintf(" reserved: "); debug_hex8(report->reserved);
|
||||
dprintf("\n");
|
||||
}
|
||||
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
static void bluefruit_trace_header()
|
||||
{
|
||||
dprintf("+------------------------------------+\n");
|
||||
dprintf("| HID report to Bluefruit via serial |\n");
|
||||
dprintf("+------------------------------------+\n|");
|
||||
}
|
||||
|
||||
static void bluefruit_trace_footer()
|
||||
{
|
||||
dprintf("|\n+------------------------------------+\n\n");
|
||||
}
|
||||
#endif
|
||||
|
||||
static void bluefruit_serial_send(uint8_t data)
|
||||
{
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
dprintf(" ");
|
||||
debug_hex8(data);
|
||||
dprintf(" ");
|
||||
#endif
|
||||
serial_send(data);
|
||||
}
|
||||
|
||||
/*------------------------------------------------------------------*
|
||||
* Host driver
|
||||
*------------------------------------------------------------------*/
|
||||
|
||||
static uint8_t keyboard_leds(void);
|
||||
static void send_keyboard(report_keyboard_t *report);
|
||||
static void send_mouse(report_mouse_t *report);
|
||||
static void send_system(uint16_t data);
|
||||
static void send_consumer(uint16_t data);
|
||||
|
||||
static host_driver_t driver = {
|
||||
keyboard_leds,
|
||||
send_keyboard,
|
||||
send_mouse,
|
||||
send_system,
|
||||
send_consumer
|
||||
};
|
||||
|
||||
host_driver_t *bluefruit_driver(void)
|
||||
{
|
||||
return &driver;
|
||||
}
|
||||
|
||||
static uint8_t keyboard_leds(void) {
|
||||
return bluefruit_keyboard_leds;
|
||||
}
|
||||
|
||||
static void send_keyboard(report_keyboard_t *report)
|
||||
{
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_header();
|
||||
#endif
|
||||
bluefruit_serial_send(0xFD);
|
||||
for (uint8_t i = 0; i < REPORT_SIZE; i++) {
|
||||
bluefruit_serial_send(report->raw[i]);
|
||||
}
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_footer();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void send_mouse(report_mouse_t *report)
|
||||
{
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_header();
|
||||
#endif
|
||||
bluefruit_serial_send(0xFD);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x03);
|
||||
bluefruit_serial_send(report->buttons);
|
||||
bluefruit_serial_send(report->x);
|
||||
bluefruit_serial_send(report->y);
|
||||
bluefruit_serial_send(report->v); // should try sending the wheel v here
|
||||
bluefruit_serial_send(report->h); // should try sending the wheel h here
|
||||
bluefruit_serial_send(0x00);
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_footer();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void send_system(uint16_t data)
|
||||
{
|
||||
}
|
||||
|
||||
/*
|
||||
+-----------------+-------------------+-------+
|
||||
| Consumer Key | Bit Map | Hex |
|
||||
+-----------------+-------------------+-------+
|
||||
| Home | 00000001 00000000 | 01 00 |
|
||||
| KeyboardLayout | 00000010 00000000 | 02 00 |
|
||||
| Search | 00000100 00000000 | 04 00 |
|
||||
| Snapshot | 00001000 00000000 | 08 00 |
|
||||
| VolumeUp | 00010000 00000000 | 10 00 |
|
||||
| VolumeDown | 00100000 00000000 | 20 00 |
|
||||
| Play/Pause | 01000000 00000000 | 40 00 |
|
||||
| Fast Forward | 10000000 00000000 | 80 00 |
|
||||
| Rewind | 00000000 00000001 | 00 01 |
|
||||
| Scan Next Track | 00000000 00000010 | 00 02 |
|
||||
| Scan Prev Track | 00000000 00000100 | 00 04 |
|
||||
| Random Play | 00000000 00001000 | 00 08 |
|
||||
| Stop | 00000000 00010000 | 00 10 |
|
||||
+-------------------------------------+-------+
|
||||
*/
|
||||
#define CONSUMER2BLUEFRUIT(usage) \
|
||||
(usage == AUDIO_MUTE ? 0x0000 : \
|
||||
(usage == AUDIO_VOL_UP ? 0x1000 : \
|
||||
(usage == AUDIO_VOL_DOWN ? 0x2000 : \
|
||||
(usage == TRANSPORT_NEXT_TRACK ? 0x0002 : \
|
||||
(usage == TRANSPORT_PREV_TRACK ? 0x0004 : \
|
||||
(usage == TRANSPORT_STOP ? 0x0010 : \
|
||||
(usage == TRANSPORT_STOP_EJECT ? 0x0000 : \
|
||||
(usage == TRANSPORT_PLAY_PAUSE ? 0x4000 : \
|
||||
(usage == AL_CC_CONFIG ? 0x0000 : \
|
||||
(usage == AL_EMAIL ? 0x0000 : \
|
||||
(usage == AL_CALCULATOR ? 0x0000 : \
|
||||
(usage == AL_LOCAL_BROWSER ? 0x0000 : \
|
||||
(usage == AC_SEARCH ? 0x0400 : \
|
||||
(usage == AC_HOME ? 0x0100 : \
|
||||
(usage == AC_BACK ? 0x0000 : \
|
||||
(usage == AC_FORWARD ? 0x0000 : \
|
||||
(usage == AC_STOP ? 0x0000 : \
|
||||
(usage == AC_REFRESH ? 0x0000 : \
|
||||
(usage == AC_BOOKMARKS ? 0x0000 : 0)))))))))))))))))))
|
||||
|
||||
static void send_consumer(uint16_t data)
|
||||
{
|
||||
static uint16_t last_data = 0;
|
||||
if (data == last_data) return;
|
||||
last_data = data;
|
||||
|
||||
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
|
||||
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
dprintf("\nData: ");
|
||||
debug_hex16(data);
|
||||
dprintf("; bitmap: ");
|
||||
debug_hex16(bitmap);
|
||||
dprintf("\n");
|
||||
bluefruit_trace_header();
|
||||
#endif
|
||||
bluefruit_serial_send(0xFD);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x02);
|
||||
bluefruit_serial_send((bitmap>>8)&0xFF);
|
||||
bluefruit_serial_send(bitmap&0xFF);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x00);
|
||||
bluefruit_serial_send(0x00);
|
||||
#ifdef BLUEFRUIT_TRACE_SERIAL
|
||||
bluefruit_trace_footer();
|
||||
#endif
|
||||
}
|
||||
|
28
protocol/bluefruit/bluefruit.h
Normal file
28
protocol/bluefruit/bluefruit.h
Normal file
@ -0,0 +1,28 @@
|
||||
/*
|
||||
Bluefruit Protocol for TMK firmware
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef VUSB_H
|
||||
#define VUSB_H
|
||||
|
||||
#include "host_driver.h"
|
||||
|
||||
|
||||
host_driver_t *bluefruit_driver(void);
|
||||
|
||||
#endif
|
116
protocol/bluefruit/main.c
Normal file
116
protocol/bluefruit/main.c
Normal file
@ -0,0 +1,116 @@
|
||||
/*
|
||||
Bluefruit Protocol for TMK firmware
|
||||
Author: Benjamin Gould, 2013
|
||||
Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/wdt.h>
|
||||
#include <avr/sleep.h>
|
||||
#include <util/delay.h>
|
||||
#include "serial.h"
|
||||
#include "keyboard.h"
|
||||
#include "usb.h"
|
||||
#include "host.h"
|
||||
#include "timer.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "sendchar.h"
|
||||
#include "suspend.h"
|
||||
#include "bluefruit.h"
|
||||
#include "pjrc.h"
|
||||
|
||||
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
|
||||
|
||||
#define HOST_DRIVER_NOT_SET 0
|
||||
#define BLUEFRUIT_HOST_DRIVER 1
|
||||
#define PJRC_HOST_DRIVER 2
|
||||
|
||||
int main(void)
|
||||
{
|
||||
|
||||
CPU_PRESCALE(0);
|
||||
|
||||
DDRD = _BV(PD5);
|
||||
DDRB = _BV(PB0);
|
||||
|
||||
PORTD = _BV(PD5);
|
||||
PORTB = _BV(PB0);
|
||||
|
||||
print_set_sendchar(sendchar);
|
||||
|
||||
usb_init();
|
||||
_delay_ms(2000);
|
||||
// while (!usb_configured()) /* wait */
|
||||
|
||||
dprintf("Initializing keyboard...\n");
|
||||
keyboard_init();
|
||||
|
||||
// This implementation is pretty simplistic... if the USB connection
|
||||
// is not configured, choose the Bluefruit, otherwise use USB
|
||||
// Definitely would prefer to have this driven by an input pin and make
|
||||
// it switch dynamically - BCG
|
||||
if (!usb_configured()) {
|
||||
|
||||
// Send power to Bluefruit... Adafruit says it takes 27 mA, I think
|
||||
// the pins should provide 40 mA, but just in case I switch the
|
||||
// Bluefruit using a transistor - BCG
|
||||
DDRB = _BV(PB6);
|
||||
PORTB |= _BV(PB6);
|
||||
|
||||
dprintf("Setting host driver to bluefruit...\n");
|
||||
host_set_driver(bluefruit_driver());
|
||||
|
||||
dprintf("Initializing serial...\n");
|
||||
serial_init();
|
||||
|
||||
// wait an extra second for the PC's operating system
|
||||
// to load drivers and do whatever it does to actually
|
||||
// be ready for input
|
||||
_delay_ms(1000);
|
||||
PORTD = ~_BV(PD5);
|
||||
dprintf("Starting main loop");
|
||||
while (1) {
|
||||
keyboard_task();
|
||||
}
|
||||
|
||||
} else {
|
||||
|
||||
// I'm not smart enough to get this done with LUFA - BCG
|
||||
dprintf("Setting host driver to PJRC...\n");
|
||||
host_set_driver(pjrc_driver());
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
sleep_led_init();
|
||||
#endif
|
||||
// wait an extra second for the PC's operating system
|
||||
// to load drivers and do whatever it does to actually
|
||||
// be ready for input
|
||||
_delay_ms(1000);
|
||||
PORTB = ~_BV(PB0);
|
||||
dprintf("Starting main loop");
|
||||
while (1) {
|
||||
while (suspend) {
|
||||
suspend_power_down();
|
||||
if (remote_wakeup && suspend_wakeup_condition()) {
|
||||
usb_remote_wakeup();
|
||||
}
|
||||
}
|
||||
keyboard_task();
|
||||
}
|
||||
}
|
||||
|
||||
}
|
@ -148,7 +148,6 @@ static void Console_Task(void)
|
||||
*/
|
||||
void EVENT_USB_Device_Connect(void)
|
||||
{
|
||||
led_set(0x1f); // all on
|
||||
}
|
||||
|
||||
void EVENT_USB_Device_Disconnect(void)
|
||||
@ -172,8 +171,9 @@ void EVENT_USB_Device_WakeUp()
|
||||
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
sleep_led_disable();
|
||||
#endif
|
||||
// NOTE: converters may not accept this
|
||||
led_set(host_keyboard_leds());
|
||||
#endif
|
||||
}
|
||||
|
||||
void EVENT_USB_Device_StartOfFrame(void)
|
||||
@ -539,11 +539,18 @@ int main(void)
|
||||
{
|
||||
SetupHardware();
|
||||
sei();
|
||||
|
||||
/* wait for USB startup & debug output */
|
||||
while (USB_DeviceState != DEVICE_STATE_Configured) {
|
||||
#if defined(INTERRUPT_CONTROL_ENDPOINT)
|
||||
while (USB_DeviceState != DEVICE_STATE_Configured) ;
|
||||
;
|
||||
#else
|
||||
USB_USBTask();
|
||||
#endif
|
||||
}
|
||||
print("USB configured.\n");
|
||||
|
||||
/* init modules */
|
||||
keyboard_init();
|
||||
host_set_driver(&lufa_driver);
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
|
@ -7,7 +7,11 @@ SRC += $(PJRC_DIR)/main.c \
|
||||
$(PJRC_DIR)/usb.c
|
||||
|
||||
# Option modules
|
||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
|
||||
ifdef MOUSEKEY_ENABLE
|
||||
SRC += $(PJRC_DIR)/usb_mouse.c
|
||||
endif
|
||||
|
||||
ifdef PS2_MOUSE_ENABLE
|
||||
SRC += $(PJRC_DIR)/usb_mouse.c
|
||||
endif
|
||||
|
||||
|
@ -662,8 +662,9 @@ ISR(USB_GEN_vect)
|
||||
suspend_wakeup_init();
|
||||
#ifdef SLEEP_LED_ENABLE
|
||||
sleep_led_disable();
|
||||
#endif
|
||||
// NOTE: converters may not accept this
|
||||
led_set(host_keyboard_leds());
|
||||
#endif
|
||||
|
||||
UDIEN |= (1<<SUSPE);
|
||||
UDIEN &= ~(1<<WAKEUPE);
|
||||
|
144
protocol/ps2.h
144
protocol/ps2.h
@ -1,5 +1,5 @@
|
||||
/*
|
||||
Copyright 2010,2011 Jun WAKO <wakojun@gmail.com>
|
||||
Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
|
||||
|
||||
This software is licensed with a Modified BSD License.
|
||||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||||
@ -37,12 +37,62 @@ POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
#ifndef PS2_H
|
||||
#define PS2_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <util/delay.h>
|
||||
#include <avr/io.h>
|
||||
|
||||
/*
|
||||
* Primitive PS/2 Library for AVR
|
||||
*
|
||||
* PS/2 Resources
|
||||
* --------------
|
||||
* [1] The PS/2 Mouse/Keyboard Protocol
|
||||
* http://www.computer-engineering.org/ps2protocol/
|
||||
* Concise and thorough primer of PS/2 protocol.
|
||||
*
|
||||
* [2] Keyboard and Auxiliary Device Controller
|
||||
* http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
|
||||
* Signal Timing and Format
|
||||
*
|
||||
* [3] Keyboards(101- and 102-key)
|
||||
* http://www.mcamafia.de/pdf/ibm_hitrc11.pdf
|
||||
* Keyboard Layout, Scan Code Set, POR, and Commands.
|
||||
*
|
||||
* [4] PS/2 Reference Manuals
|
||||
* http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
|
||||
* Collection of IBM Personal System/2 documents.
|
||||
*
|
||||
* [5] TrackPoint Engineering Specifications for version 3E
|
||||
* https://web.archive.org/web/20100526161812/http://wwwcssrv.almaden.ibm.com/trackpoint/download.html
|
||||
*/
|
||||
#define PS2_ACK 0xFA
|
||||
#define PS2_RESEND 0xFE
|
||||
#define PS2_SET_LED 0xED
|
||||
|
||||
// TODO: error numbers
|
||||
#define PS2_ERR_NONE 0
|
||||
#define PS2_ERR_STARTBIT1 1
|
||||
#define PS2_ERR_STARTBIT2 2
|
||||
#define PS2_ERR_STARTBIT3 3
|
||||
#define PS2_ERR_PARITY 0x10
|
||||
#define PS2_ERR_NODATA 0x20
|
||||
|
||||
#define PS2_LED_SCROLL_LOCK 0
|
||||
#define PS2_LED_NUM_LOCK 1
|
||||
#define PS2_LED_CAPS_LOCK 2
|
||||
|
||||
|
||||
/* port settings for clock and data line */
|
||||
extern uint8_t ps2_error;
|
||||
|
||||
void ps2_host_init(void);
|
||||
uint8_t ps2_host_send(uint8_t data);
|
||||
uint8_t ps2_host_recv_response(void);
|
||||
uint8_t ps2_host_recv(void);
|
||||
void ps2_host_set_led(uint8_t usb_led);
|
||||
|
||||
|
||||
/* Check port settings for clock and data line */
|
||||
#if !(defined(PS2_CLOCK_PORT) && \
|
||||
defined(PS2_CLOCK_PIN) && \
|
||||
defined(PS2_CLOCK_DDR) && \
|
||||
@ -57,27 +107,79 @@ POSSIBILITY OF SUCH DAMAGE.
|
||||
# error "PS/2 data port setting is required in config.h"
|
||||
#endif
|
||||
|
||||
#define PS2_ACK 0xFA
|
||||
#define PS2_RESEND 0xFE
|
||||
#define PS2_SET_LED 0xED
|
||||
/*--------------------------------------------------------------------
|
||||
* static functions
|
||||
*------------------------------------------------------------------*/
|
||||
static inline void clock_lo(void)
|
||||
{
|
||||
PS2_CLOCK_PORT &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_DDR |= (1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline void clock_hi(void)
|
||||
{
|
||||
/* input with pull up */
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline bool clock_in(void)
|
||||
{
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
|
||||
_delay_us(1);
|
||||
return PS2_CLOCK_PIN&(1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline void data_lo(void)
|
||||
{
|
||||
PS2_DATA_PORT &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_DDR |= (1<<PS2_DATA_BIT);
|
||||
}
|
||||
static inline void data_hi(void)
|
||||
{
|
||||
/* input with pull up */
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
|
||||
}
|
||||
static inline bool data_in(void)
|
||||
{
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
|
||||
_delay_us(1);
|
||||
return PS2_DATA_PIN&(1<<PS2_DATA_BIT);
|
||||
}
|
||||
|
||||
#define PS2_ERR_NONE 0
|
||||
#define PS2_ERR_PARITY 0x10
|
||||
static inline uint16_t wait_clock_lo(uint16_t us)
|
||||
{
|
||||
while (clock_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_clock_hi(uint16_t us)
|
||||
{
|
||||
while (!clock_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_data_lo(uint16_t us)
|
||||
{
|
||||
while (data_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_data_hi(uint16_t us)
|
||||
{
|
||||
while (!data_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
|
||||
#define PS2_LED_SCROLL_LOCK 0
|
||||
#define PS2_LED_NUM_LOCK 1
|
||||
#define PS2_LED_CAPS_LOCK 2
|
||||
/* idle state that device can send */
|
||||
static inline void idle(void)
|
||||
{
|
||||
clock_hi();
|
||||
data_hi();
|
||||
}
|
||||
|
||||
|
||||
extern uint8_t ps2_error;
|
||||
|
||||
/* host role */
|
||||
void ps2_host_init(void);
|
||||
uint8_t ps2_host_send(uint8_t data);
|
||||
uint8_t ps2_host_recv_response(void);
|
||||
uint8_t ps2_host_recv(void);
|
||||
void ps2_host_set_led(uint8_t usb_led);
|
||||
|
||||
/* device role */
|
||||
/* inhibit device to send */
|
||||
static inline void inhibit(void)
|
||||
{
|
||||
clock_lo();
|
||||
data_hi();
|
||||
}
|
||||
|
||||
#endif
|
||||
|
185
protocol/ps2_busywait.c
Normal file
185
protocol/ps2_busywait.c
Normal file
@ -0,0 +1,185 @@
|
||||
/*
|
||||
Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
|
||||
|
||||
This software is licensed with a Modified BSD License.
|
||||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||||
GPL-compatible, and OK to use in both free and proprietary applications.
|
||||
Additions and corrections to this file are welcome.
|
||||
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in
|
||||
the documentation and/or other materials provided with the
|
||||
distribution.
|
||||
|
||||
* Neither the name of the copyright holders nor the names of
|
||||
contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*
|
||||
* PS/2 protocol busywait version
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <util/delay.h>
|
||||
#include "ps2.h"
|
||||
#include "debug.h"
|
||||
|
||||
|
||||
#define WAIT(stat, us, err) do { \
|
||||
if (!wait_##stat(us)) { \
|
||||
ps2_error = err; \
|
||||
goto ERROR; \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
|
||||
uint8_t ps2_error = PS2_ERR_NONE;
|
||||
|
||||
|
||||
void ps2_host_init(void)
|
||||
{
|
||||
// POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
|
||||
_delay_ms(2500);
|
||||
|
||||
inhibit();
|
||||
}
|
||||
|
||||
uint8_t ps2_host_send(uint8_t data)
|
||||
{
|
||||
bool parity = true;
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
|
||||
/* terminate a transmission if we have */
|
||||
inhibit();
|
||||
_delay_us(100); // 100us [4]p.13, [5]p.50
|
||||
|
||||
/* 'Request to Send' and Start bit */
|
||||
data_lo();
|
||||
clock_hi();
|
||||
WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
|
||||
|
||||
/* Data bit */
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
_delay_us(15);
|
||||
if (data&(1<<i)) {
|
||||
parity = !parity;
|
||||
data_hi();
|
||||
} else {
|
||||
data_lo();
|
||||
}
|
||||
WAIT(clock_hi, 50, 2);
|
||||
WAIT(clock_lo, 50, 3);
|
||||
}
|
||||
|
||||
/* Parity bit */
|
||||
_delay_us(15);
|
||||
if (parity) { data_hi(); } else { data_lo(); }
|
||||
WAIT(clock_hi, 50, 4);
|
||||
WAIT(clock_lo, 50, 5);
|
||||
|
||||
/* Stop bit */
|
||||
_delay_us(15);
|
||||
data_hi();
|
||||
|
||||
/* Ack */
|
||||
WAIT(data_lo, 50, 6);
|
||||
WAIT(clock_lo, 50, 7);
|
||||
|
||||
/* wait for idle state */
|
||||
WAIT(clock_hi, 50, 8);
|
||||
WAIT(data_hi, 50, 9);
|
||||
|
||||
inhibit();
|
||||
return ps2_host_recv_response();
|
||||
ERROR:
|
||||
inhibit();
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* receive data when host want else inhibit communication */
|
||||
uint8_t ps2_host_recv_response(void)
|
||||
{
|
||||
// Command may take 25ms/20ms at most([5]p.46, [3]p.21)
|
||||
// 250 * 100us(wait for start bit in ps2_host_recv)
|
||||
uint8_t data = 0;
|
||||
uint8_t try = 250;
|
||||
do {
|
||||
data = ps2_host_recv();
|
||||
} while (try-- && ps2_error);
|
||||
return data;
|
||||
}
|
||||
|
||||
/* called after start bit comes */
|
||||
uint8_t ps2_host_recv(void)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
bool parity = true;
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
|
||||
/* release lines(idle state) */
|
||||
idle();
|
||||
|
||||
/* start bit [1] */
|
||||
WAIT(clock_lo, 100, 1); // TODO: this is enough?
|
||||
WAIT(data_lo, 1, 2);
|
||||
WAIT(clock_hi, 50, 3);
|
||||
|
||||
/* data [2-9] */
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
WAIT(clock_lo, 50, 4);
|
||||
if (data_in()) {
|
||||
parity = !parity;
|
||||
data |= (1<<i);
|
||||
}
|
||||
WAIT(clock_hi, 50, 5);
|
||||
}
|
||||
|
||||
/* parity [10] */
|
||||
WAIT(clock_lo, 50, 6);
|
||||
if (data_in() != parity) {
|
||||
ps2_error = PS2_ERR_PARITY;
|
||||
goto ERROR;
|
||||
}
|
||||
WAIT(clock_hi, 50, 7);
|
||||
|
||||
/* stop bit [11] */
|
||||
WAIT(clock_lo, 50, 8);
|
||||
WAIT(data_hi, 1, 9);
|
||||
WAIT(clock_hi, 50, 10);
|
||||
|
||||
inhibit();
|
||||
return data;
|
||||
ERROR:
|
||||
if (ps2_error > PS2_ERR_STARTBIT3) {
|
||||
xprintf("x%02X\n", ps2_error);
|
||||
}
|
||||
inhibit();
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* send LED state to keyboard */
|
||||
void ps2_host_set_led(uint8_t led)
|
||||
{
|
||||
ps2_host_send(0xED);
|
||||
ps2_host_send(led);
|
||||
}
|
@ -1,5 +1,5 @@
|
||||
/*
|
||||
Copyright 2010,2011 Jun WAKO <wakojun@gmail.com>
|
||||
Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
|
||||
|
||||
This software is licensed with a Modified BSD License.
|
||||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||||
@ -35,45 +35,15 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*
|
||||
* PS/2 protocol Pin interrupt version
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include "ps2.h"
|
||||
#include "debug.h"
|
||||
|
||||
|
||||
static uint8_t recv_data(void);
|
||||
static inline void clock_lo(void);
|
||||
static inline void clock_hi(void);
|
||||
static inline bool clock_in(void);
|
||||
static inline void data_lo(void);
|
||||
static inline void data_hi(void);
|
||||
static inline bool data_in(void);
|
||||
static inline uint16_t wait_clock_lo(uint16_t us);
|
||||
static inline uint16_t wait_clock_hi(uint16_t us);
|
||||
static inline uint16_t wait_data_lo(uint16_t us);
|
||||
static inline uint16_t wait_data_hi(uint16_t us);
|
||||
static inline void idle(void);
|
||||
static inline void inhibit(void);
|
||||
|
||||
|
||||
/*
|
||||
Primitive PS/2 Library for AVR
|
||||
==============================
|
||||
Host side is only supported now.
|
||||
|
||||
|
||||
I/O control
|
||||
-----------
|
||||
High state is asserted by input with pull up.
|
||||
|
||||
|
||||
PS/2 References
|
||||
---------------
|
||||
http://www.computer-engineering.org/ps2protocol/
|
||||
http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
|
||||
*/
|
||||
#include "print.h"
|
||||
|
||||
|
||||
#define WAIT(stat, us, err) do { \
|
||||
@ -87,35 +57,38 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
|
||||
uint8_t ps2_error = PS2_ERR_NONE;
|
||||
|
||||
|
||||
static inline uint8_t pbuf_dequeue(void);
|
||||
static inline void pbuf_enqueue(uint8_t data);
|
||||
static inline bool pbuf_has_data(void);
|
||||
static inline void pbuf_clear(void);
|
||||
|
||||
|
||||
void ps2_host_init(void)
|
||||
{
|
||||
#ifdef PS2_USE_INT
|
||||
idle();
|
||||
PS2_INT_INIT();
|
||||
PS2_INT_ON();
|
||||
idle();
|
||||
#else
|
||||
inhibit();
|
||||
#endif
|
||||
// POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
|
||||
//_delay_ms(2500);
|
||||
}
|
||||
|
||||
// TODO: send using interrupt if available
|
||||
uint8_t ps2_host_send(uint8_t data)
|
||||
{
|
||||
uint8_t res = 0;
|
||||
bool parity = true;
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
#ifdef PS2_USE_INT
|
||||
|
||||
PS2_INT_OFF();
|
||||
#endif
|
||||
|
||||
/* terminate a transmission if we have */
|
||||
inhibit();
|
||||
_delay_us(100);
|
||||
_delay_us(100); // 100us [4]p.13, [5]p.50
|
||||
|
||||
/* start bit [1] */
|
||||
/* 'Request to Send' and Start bit */
|
||||
data_lo();
|
||||
clock_hi();
|
||||
WAIT(clock_lo, 15000, 1);
|
||||
/* data [2-9] */
|
||||
WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
|
||||
|
||||
/* Data bit[2-9] */
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
_delay_us(15);
|
||||
if (data&(1<<i)) {
|
||||
@ -127,15 +100,18 @@ uint8_t ps2_host_send(uint8_t data)
|
||||
WAIT(clock_hi, 50, 2);
|
||||
WAIT(clock_lo, 50, 3);
|
||||
}
|
||||
/* parity [10] */
|
||||
|
||||
/* Parity bit */
|
||||
_delay_us(15);
|
||||
if (parity) { data_hi(); } else { data_lo(); }
|
||||
WAIT(clock_hi, 50, 4);
|
||||
WAIT(clock_lo, 50, 5);
|
||||
/* stop bit [11] */
|
||||
|
||||
/* Stop bit */
|
||||
_delay_us(15);
|
||||
data_hi();
|
||||
/* ack [12] */
|
||||
|
||||
/* Ack */
|
||||
WAIT(data_lo, 50, 6);
|
||||
WAIT(clock_lo, 50, 7);
|
||||
|
||||
@ -143,99 +119,37 @@ uint8_t ps2_host_send(uint8_t data)
|
||||
WAIT(clock_hi, 50, 8);
|
||||
WAIT(data_hi, 50, 9);
|
||||
|
||||
res = ps2_host_recv_response();
|
||||
ERROR:
|
||||
#ifdef PS2_USE_INT
|
||||
PS2_INT_ON();
|
||||
idle();
|
||||
#else
|
||||
inhibit();
|
||||
#endif
|
||||
return res;
|
||||
PS2_INT_ON();
|
||||
return ps2_host_recv_response();
|
||||
ERROR:
|
||||
idle();
|
||||
PS2_INT_ON();
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* receive data when host want else inhibit communication */
|
||||
uint8_t ps2_host_recv_response(void)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
|
||||
/* terminate a transmission if we have */
|
||||
inhibit();
|
||||
_delay_us(100);
|
||||
|
||||
/* release lines(idle state) */
|
||||
idle();
|
||||
|
||||
/* wait start bit */
|
||||
wait_clock_lo(2000);
|
||||
data = recv_data();
|
||||
|
||||
inhibit();
|
||||
return data;
|
||||
}
|
||||
|
||||
#ifndef PS2_USE_INT
|
||||
uint8_t ps2_host_recv(void)
|
||||
{
|
||||
return ps2_host_recv_response();
|
||||
}
|
||||
#else
|
||||
/* ring buffer to store ps/2 key data */
|
||||
#define PBUF_SIZE 32
|
||||
static uint8_t pbuf[PBUF_SIZE];
|
||||
static uint8_t pbuf_head = 0;
|
||||
static uint8_t pbuf_tail = 0;
|
||||
static inline void pbuf_enqueue(uint8_t data)
|
||||
{
|
||||
if (!data)
|
||||
return;
|
||||
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
uint8_t next = (pbuf_head + 1) % PBUF_SIZE;
|
||||
if (next != pbuf_tail) {
|
||||
pbuf[pbuf_head] = data;
|
||||
pbuf_head = next;
|
||||
} else {
|
||||
debug("pbuf: full\n");
|
||||
// Command may take 25ms/20ms at most([5]p.46, [3]p.21)
|
||||
uint8_t retry = 25;
|
||||
while (retry-- && !pbuf_has_data()) {
|
||||
_delay_ms(1);
|
||||
}
|
||||
SREG = sreg;
|
||||
}
|
||||
static inline uint8_t pbuf_dequeue(void)
|
||||
{
|
||||
uint8_t val = 0;
|
||||
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
if (pbuf_head != pbuf_tail) {
|
||||
val = pbuf[pbuf_tail];
|
||||
pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE;
|
||||
}
|
||||
SREG = sreg;
|
||||
|
||||
return val;
|
||||
return pbuf_dequeue();
|
||||
}
|
||||
|
||||
/* get data received by interrupt */
|
||||
uint8_t ps2_host_recv(void)
|
||||
{
|
||||
if (ps2_error) {
|
||||
print("x");
|
||||
phex(ps2_error);
|
||||
ps2_host_send(0xFE); // request to resend
|
||||
if (pbuf_has_data()) {
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
return pbuf_dequeue();
|
||||
} else {
|
||||
ps2_error = PS2_ERR_NODATA;
|
||||
return 0;
|
||||
}
|
||||
idle();
|
||||
return pbuf_dequeue();
|
||||
}
|
||||
|
||||
#if 0
|
||||
#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0)
|
||||
#define DEBUGP(x) do { PORTC = x; } while (0)
|
||||
#else
|
||||
#define DEBUGP_INIT()
|
||||
#define DEBUGP(x)
|
||||
#endif
|
||||
ISR(PS2_INT_VECT)
|
||||
{
|
||||
static enum {
|
||||
@ -256,7 +170,6 @@ ISR(PS2_INT_VECT)
|
||||
}
|
||||
|
||||
state++;
|
||||
DEBUGP(state);
|
||||
switch (state) {
|
||||
case START:
|
||||
if (data_in())
|
||||
@ -296,8 +209,6 @@ ISR(PS2_INT_VECT)
|
||||
}
|
||||
goto RETURN;
|
||||
ERROR:
|
||||
DEBUGP(0x0F);
|
||||
inhibit();
|
||||
ps2_error = state;
|
||||
DONE:
|
||||
state = INIT;
|
||||
@ -306,13 +217,6 @@ DONE:
|
||||
RETURN:
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
static void ps2_reset(void)
|
||||
{
|
||||
ps2_host_send(0xFF);
|
||||
}
|
||||
|
||||
/* send LED state to keyboard */
|
||||
void ps2_host_set_led(uint8_t led)
|
||||
@ -322,114 +226,53 @@ void ps2_host_set_led(uint8_t led)
|
||||
}
|
||||
|
||||
|
||||
/* called after start bit comes */
|
||||
static uint8_t recv_data(void)
|
||||
/*--------------------------------------------------------------------
|
||||
* Ring buffer to store scan codes from keyboard
|
||||
*------------------------------------------------------------------*/
|
||||
#define PBUF_SIZE 32
|
||||
static uint8_t pbuf[PBUF_SIZE];
|
||||
static uint8_t pbuf_head = 0;
|
||||
static uint8_t pbuf_tail = 0;
|
||||
static inline void pbuf_enqueue(uint8_t data)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
bool parity = true;
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
|
||||
/* start bit [1] */
|
||||
WAIT(clock_lo, 1, 1);
|
||||
WAIT(data_lo, 1, 2);
|
||||
WAIT(clock_hi, 50, 3);
|
||||
|
||||
/* data [2-9] */
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
WAIT(clock_lo, 50, 4);
|
||||
if (data_in()) {
|
||||
parity = !parity;
|
||||
data |= (1<<i);
|
||||
}
|
||||
WAIT(clock_hi, 50, 5);
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
uint8_t next = (pbuf_head + 1) % PBUF_SIZE;
|
||||
if (next != pbuf_tail) {
|
||||
pbuf[pbuf_head] = data;
|
||||
pbuf_head = next;
|
||||
} else {
|
||||
print("pbuf: full\n");
|
||||
}
|
||||
SREG = sreg;
|
||||
}
|
||||
static inline uint8_t pbuf_dequeue(void)
|
||||
{
|
||||
uint8_t val = 0;
|
||||
|
||||
/* parity [10] */
|
||||
WAIT(clock_lo, 50, 6);
|
||||
if (data_in() != parity) {
|
||||
ps2_error = PS2_ERR_PARITY;
|
||||
goto ERROR;
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
if (pbuf_head != pbuf_tail) {
|
||||
val = pbuf[pbuf_tail];
|
||||
pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE;
|
||||
}
|
||||
WAIT(clock_hi, 50, 7);
|
||||
SREG = sreg;
|
||||
|
||||
/* stop bit [11] */
|
||||
WAIT(clock_lo, 50, 8);
|
||||
WAIT(data_hi, 1, 9);
|
||||
WAIT(clock_hi, 50, 10);
|
||||
|
||||
return data;
|
||||
ERROR:
|
||||
return 0;
|
||||
return val;
|
||||
}
|
||||
static inline bool pbuf_has_data(void)
|
||||
{
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
bool has_data = (pbuf_head != pbuf_tail);
|
||||
SREG = sreg;
|
||||
return has_data;
|
||||
}
|
||||
static inline void pbuf_clear(void)
|
||||
{
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
pbuf_head = pbuf_tail = 0;
|
||||
SREG = sreg;
|
||||
}
|
||||
|
||||
static inline void clock_lo()
|
||||
{
|
||||
PS2_CLOCK_PORT &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_DDR |= (1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline void clock_hi()
|
||||
{
|
||||
/* input with pull up */
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline bool clock_in()
|
||||
{
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
|
||||
_delay_us(1);
|
||||
return PS2_CLOCK_PIN&(1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline void data_lo()
|
||||
{
|
||||
PS2_DATA_PORT &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_DDR |= (1<<PS2_DATA_BIT);
|
||||
}
|
||||
static inline void data_hi()
|
||||
{
|
||||
/* input with pull up */
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
|
||||
}
|
||||
static inline bool data_in()
|
||||
{
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
|
||||
_delay_us(1);
|
||||
return PS2_DATA_PIN&(1<<PS2_DATA_BIT);
|
||||
}
|
||||
|
||||
static inline uint16_t wait_clock_lo(uint16_t us)
|
||||
{
|
||||
while (clock_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_clock_hi(uint16_t us)
|
||||
{
|
||||
while (!clock_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_data_lo(uint16_t us)
|
||||
{
|
||||
while (data_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_data_hi(uint16_t us)
|
||||
{
|
||||
while (!data_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
|
||||
/* idle state that device can send */
|
||||
static inline void idle(void)
|
||||
{
|
||||
clock_hi();
|
||||
data_hi();
|
||||
}
|
||||
|
||||
/* inhibit device to send */
|
||||
static inline void inhibit(void)
|
||||
{
|
||||
clock_lo();
|
||||
data_hi();
|
||||
}
|
@ -1,5 +1,5 @@
|
||||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2011,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
@ -20,199 +20,196 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include<util/delay.h>
|
||||
#include "ps2.h"
|
||||
#include "ps2_mouse.h"
|
||||
#include "usb_mouse.h"
|
||||
|
||||
#define PS2_MOUSE_DEBUG
|
||||
#ifdef PS2_MOUSE_DEBUG
|
||||
# include "print.h"
|
||||
# include "debug.h"
|
||||
#else
|
||||
# define print(s)
|
||||
# define phex(h)
|
||||
# define phex16(h)
|
||||
#endif
|
||||
|
||||
// disable when errors occur 255 times.
|
||||
#define ERROR_RETURN() do { \
|
||||
if (ps2_error) { \
|
||||
if (ps2_mouse_error_count < 255) { \
|
||||
ps2_mouse_error_count++; \
|
||||
} else { \
|
||||
ps2_mouse_error_count = 0; \
|
||||
ps2_mouse_enable = false; \
|
||||
} \
|
||||
return ps2_error; \
|
||||
} \
|
||||
} while (0)
|
||||
#include "report.h"
|
||||
#include "host.h"
|
||||
#include "timer.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
|
||||
|
||||
/*
|
||||
TODO
|
||||
----
|
||||
- Stream mode
|
||||
- Tracpoint command support: needed
|
||||
- Middle button + move = Wheel traslation
|
||||
*/
|
||||
bool ps2_mouse_enable = true;
|
||||
uint8_t ps2_mouse_x = 0;
|
||||
uint8_t ps2_mouse_y = 0;
|
||||
uint8_t ps2_mouse_btn = 0;
|
||||
uint8_t ps2_mouse_error_count = 0;
|
||||
|
||||
static uint8_t ps2_mouse_btn_prev = 0;
|
||||
static report_mouse_t mouse_report = {};
|
||||
|
||||
|
||||
static void print_usb_data(void);
|
||||
|
||||
|
||||
/* supports only 3 button mouse at this time */
|
||||
uint8_t ps2_mouse_init(void) {
|
||||
uint8_t rcv;
|
||||
|
||||
if (!ps2_mouse_enable) return 1;
|
||||
|
||||
ps2_host_init();
|
||||
|
||||
// Reset
|
||||
_delay_ms(1000); // wait for powering up
|
||||
|
||||
// send Reset
|
||||
rcv = ps2_host_send(0xFF);
|
||||
print("ps2_mouse_init: send 0xFF: ");
|
||||
phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// ACK
|
||||
rcv = ps2_host_recv();
|
||||
print("ps2_mouse_init: read ACK: ");
|
||||
print("ps2_mouse_init: send Reset: ");
|
||||
phex(rcv); phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// BAT takes some time
|
||||
_delay_ms(100);
|
||||
rcv = ps2_host_recv();
|
||||
// read completion code of BAT
|
||||
rcv = ps2_host_recv_response();
|
||||
print("ps2_mouse_init: read BAT: ");
|
||||
phex(rcv); phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// Device ID
|
||||
rcv = ps2_host_recv();
|
||||
// read Device ID
|
||||
rcv = ps2_host_recv_response();
|
||||
print("ps2_mouse_init: read DevID: ");
|
||||
phex(rcv); phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// Enable data reporting
|
||||
ps2_host_send(0xF4);
|
||||
print("ps2_mouse_init: send 0xF4: ");
|
||||
phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// ACK
|
||||
rcv = ps2_host_recv();
|
||||
print("ps2_mouse_init: read ACK: ");
|
||||
phex(rcv); phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// Set Remote mode
|
||||
ps2_host_send(0xF0);
|
||||
// send Set Remote mode
|
||||
rcv = ps2_host_send(0xF0);
|
||||
print("ps2_mouse_init: send 0xF0: ");
|
||||
phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
// ACK
|
||||
rcv = ps2_host_recv();
|
||||
print("ps2_mouse_init: read ACK: ");
|
||||
phex(rcv); phex(ps2_error); print("\n");
|
||||
ERROR_RETURN();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
Data format:
|
||||
bit: 7 6 5 4 3 2 1 0
|
||||
-----------------------------------------------------------------------
|
||||
0 btn: Yovflw Xovflw Ysign Xsign 1 Middle Right Left
|
||||
1 x: X movement(0-255)
|
||||
2 y: Y movement(0-255)
|
||||
*/
|
||||
uint8_t ps2_mouse_read(void)
|
||||
#define X_IS_NEG (mouse_report.buttons & (1<<PS2_MOUSE_X_SIGN))
|
||||
#define Y_IS_NEG (mouse_report.buttons & (1<<PS2_MOUSE_Y_SIGN))
|
||||
#define X_IS_OVF (mouse_report.buttons & (1<<PS2_MOUSE_X_OVFLW))
|
||||
#define Y_IS_OVF (mouse_report.buttons & (1<<PS2_MOUSE_Y_OVFLW))
|
||||
void ps2_mouse_task(void)
|
||||
{
|
||||
enum { SCROLL_NONE, SCROLL_BTN, SCROLL_SENT };
|
||||
static uint8_t scroll_state = SCROLL_NONE;
|
||||
static uint8_t buttons_prev = 0;
|
||||
|
||||
/* receives packet from mouse */
|
||||
uint8_t rcv;
|
||||
|
||||
if (!ps2_mouse_enable) return 1;
|
||||
|
||||
ps2_host_send(0xEB);
|
||||
ERROR_RETURN();
|
||||
|
||||
rcv=ps2_host_recv();
|
||||
ERROR_RETURN();
|
||||
|
||||
if(rcv==0xFA) {
|
||||
ps2_mouse_btn = ps2_host_recv();
|
||||
ERROR_RETURN();
|
||||
ps2_mouse_x = ps2_host_recv();
|
||||
ERROR_RETURN();
|
||||
ps2_mouse_y = ps2_host_recv();
|
||||
ERROR_RETURN();
|
||||
rcv = ps2_host_send(PS2_MOUSE_READ_DATA);
|
||||
if (rcv == PS2_ACK) {
|
||||
mouse_report.buttons = ps2_host_recv_response();
|
||||
mouse_report.x = ps2_host_recv_response();
|
||||
mouse_report.y = ps2_host_recv_response();
|
||||
} else {
|
||||
if (!debug_mouse) print("ps2_mouse: fail to get mouse packet\n");
|
||||
return;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
bool ps2_mouse_changed(void)
|
||||
{
|
||||
return (ps2_mouse_x || ps2_mouse_y || (ps2_mouse_btn & PS2_MOUSE_BTN_MASK) != ps2_mouse_btn_prev);
|
||||
}
|
||||
/* if mouse moves or buttons state changes */
|
||||
if (mouse_report.x || mouse_report.y ||
|
||||
((mouse_report.buttons ^ buttons_prev) & PS2_MOUSE_BTN_MASK)) {
|
||||
|
||||
#define PS2_MOUSE_SCROLL_BUTTON 0x04
|
||||
void ps2_mouse_usb_send(void)
|
||||
{
|
||||
static bool scrolled = false;
|
||||
#ifdef PS2_MOUSE_DEBUG
|
||||
print("ps2_mouse raw: [");
|
||||
phex(mouse_report.buttons); print("|");
|
||||
print_hex8((uint8_t)mouse_report.x); print(" ");
|
||||
print_hex8((uint8_t)mouse_report.y); print("]\n");
|
||||
#endif
|
||||
|
||||
if (!ps2_mouse_enable) return;
|
||||
buttons_prev = mouse_report.buttons;
|
||||
|
||||
if (ps2_mouse_changed()) {
|
||||
int8_t x, y, v, h;
|
||||
x = y = v = h = 0;
|
||||
// PS/2 mouse data is '9-bit integer'(-256 to 255) which is comprised of sign-bit and 8-bit value.
|
||||
// bit: 8 7 ... 0
|
||||
// sign \8-bit/
|
||||
//
|
||||
// Meanwhile USB HID mouse indicates 8bit data(-127 to 127), note that -128 is not used.
|
||||
//
|
||||
// This converts PS/2 data into HID value. Use only -127-127 out of PS/2 9-bit.
|
||||
mouse_report.x = X_IS_NEG ?
|
||||
((!X_IS_OVF && -127 <= mouse_report.x && mouse_report.x <= -1) ? mouse_report.x : -127) :
|
||||
((!X_IS_OVF && 0 <= mouse_report.x && mouse_report.x <= 127) ? mouse_report.x : 127);
|
||||
mouse_report.y = Y_IS_NEG ?
|
||||
((!Y_IS_OVF && -127 <= mouse_report.y && mouse_report.y <= -1) ? mouse_report.y : -127) :
|
||||
((!Y_IS_OVF && 0 <= mouse_report.y && mouse_report.y <= 127) ? mouse_report.y : 127);
|
||||
|
||||
// convert scale of X, Y: PS/2(-256/255) -> USB(-127/127)
|
||||
if (ps2_mouse_btn & (1<<PS2_MOUSE_X_SIGN))
|
||||
x = ps2_mouse_x > 128 ? (int8_t)ps2_mouse_x : -127;
|
||||
else
|
||||
x = ps2_mouse_x < 128 ? (int8_t)ps2_mouse_x : 127;
|
||||
// remove sign and overflow flags
|
||||
mouse_report.buttons &= PS2_MOUSE_BTN_MASK;
|
||||
|
||||
if (ps2_mouse_btn & (1<<PS2_MOUSE_Y_SIGN))
|
||||
y = ps2_mouse_y > 128 ? (int8_t)ps2_mouse_y : -127;
|
||||
else
|
||||
y = ps2_mouse_y < 128 ? (int8_t)ps2_mouse_y : 127;
|
||||
// invert coordinate of y to conform to USB HID mouse
|
||||
mouse_report.y = -mouse_report.y;
|
||||
|
||||
// Y is needed to reverse
|
||||
y = -y;
|
||||
|
||||
if (ps2_mouse_btn & PS2_MOUSE_SCROLL_BUTTON) {
|
||||
// scroll
|
||||
if (x > 0 || x < 0) h = (x > 64 ? 64 : (x < -64 ? -64 :x));
|
||||
if (y > 0 || y < 0) v = (y > 64 ? 64 : (y < -64 ? -64 :y));
|
||||
if (h || v) {
|
||||
scrolled = true;
|
||||
usb_mouse_send(0,0, -v/16, h/16, 0);
|
||||
_delay_ms(100);
|
||||
#if PS2_MOUSE_SCROLL_BTN_MASK
|
||||
static uint16_t scroll_button_time = 0;
|
||||
if ((mouse_report.buttons & (PS2_MOUSE_SCROLL_BTN_MASK)) == (PS2_MOUSE_SCROLL_BTN_MASK)) {
|
||||
if (scroll_state == SCROLL_NONE) {
|
||||
scroll_button_time = timer_read();
|
||||
scroll_state = SCROLL_BTN;
|
||||
}
|
||||
} else if (!scrolled && (ps2_mouse_btn_prev & PS2_MOUSE_SCROLL_BUTTON)) {
|
||||
usb_mouse_send(0,0,0,0, PS2_MOUSE_SCROLL_BUTTON);
|
||||
_delay_ms(100);
|
||||
usb_mouse_send(0,0,0,0, 0);
|
||||
} else {
|
||||
scrolled = false;
|
||||
usb_mouse_send(x, y, 0, 0, ps2_mouse_btn & PS2_MOUSE_BTN_MASK);
|
||||
}
|
||||
|
||||
ps2_mouse_btn_prev = (ps2_mouse_btn & PS2_MOUSE_BTN_MASK);
|
||||
ps2_mouse_print();
|
||||
// doesn't send Scroll Button
|
||||
//mouse_report.buttons &= ~(PS2_MOUSE_SCROLL_BTN_MASK);
|
||||
|
||||
if (mouse_report.x || mouse_report.y) {
|
||||
scroll_state = SCROLL_SENT;
|
||||
|
||||
mouse_report.v = -mouse_report.y/(PS2_MOUSE_SCROLL_DIVISOR_V);
|
||||
mouse_report.h = mouse_report.x/(PS2_MOUSE_SCROLL_DIVISOR_H);
|
||||
mouse_report.x = 0;
|
||||
mouse_report.y = 0;
|
||||
//host_mouse_send(&mouse_report);
|
||||
}
|
||||
}
|
||||
else if ((mouse_report.buttons & (PS2_MOUSE_SCROLL_BTN_MASK)) == 0) {
|
||||
#if PS2_MOUSE_SCROLL_BTN_SEND
|
||||
if (scroll_state == SCROLL_BTN &&
|
||||
TIMER_DIFF_16(timer_read(), scroll_button_time) < PS2_MOUSE_SCROLL_BTN_SEND) {
|
||||
// send Scroll Button(down and up at once) when not scrolled
|
||||
mouse_report.buttons |= (PS2_MOUSE_SCROLL_BTN_MASK);
|
||||
host_mouse_send(&mouse_report);
|
||||
_delay_ms(100);
|
||||
mouse_report.buttons &= ~(PS2_MOUSE_SCROLL_BTN_MASK);
|
||||
}
|
||||
#endif
|
||||
scroll_state = SCROLL_NONE;
|
||||
}
|
||||
// doesn't send Scroll Button
|
||||
mouse_report.buttons &= ~(PS2_MOUSE_SCROLL_BTN_MASK);
|
||||
#endif
|
||||
|
||||
|
||||
host_mouse_send(&mouse_report);
|
||||
print_usb_data();
|
||||
}
|
||||
ps2_mouse_x = 0;
|
||||
ps2_mouse_y = 0;
|
||||
ps2_mouse_btn = 0;
|
||||
// clear report
|
||||
mouse_report.x = 0;
|
||||
mouse_report.y = 0;
|
||||
mouse_report.v = 0;
|
||||
mouse_report.h = 0;
|
||||
mouse_report.buttons = 0;
|
||||
}
|
||||
|
||||
void ps2_mouse_print(void)
|
||||
static void print_usb_data(void)
|
||||
{
|
||||
if (!debug_mouse) return;
|
||||
print("ps2_mouse[btn|x y]: ");
|
||||
phex(ps2_mouse_btn); print("|");
|
||||
phex(ps2_mouse_x); print(" ");
|
||||
phex(ps2_mouse_y); print("\n");
|
||||
print("ps2_mouse usb: [");
|
||||
phex(mouse_report.buttons); print("|");
|
||||
print_hex8((uint8_t)mouse_report.x); print(" ");
|
||||
print_hex8((uint8_t)mouse_report.y); print(" ");
|
||||
print_hex8((uint8_t)mouse_report.v); print(" ");
|
||||
print_hex8((uint8_t)mouse_report.h); print("]\n");
|
||||
}
|
||||
|
||||
|
||||
/* PS/2 Mouse Synopsis
|
||||
* http://www.computer-engineering.org/ps2mouse/
|
||||
*
|
||||
* Command:
|
||||
* 0xFF: Reset
|
||||
* 0xF6: Set Defaults Sampling; rate=100, resolution=4cnt/mm, scaling=1:1, reporting=disabled
|
||||
* 0xF5: Disable Data Reporting
|
||||
* 0xF4: Enable Data Reporting
|
||||
* 0xF3: Set Sample Rate
|
||||
* 0xF2: Get Device ID
|
||||
* 0xF0: Set Remote Mode
|
||||
* 0xEB: Read Data
|
||||
* 0xEA: Set Stream Mode
|
||||
* 0xE9: Status Request
|
||||
* 0xE8: Set Resolution
|
||||
* 0xE7: Set Scaling 2:1
|
||||
* 0xE6: Set Scaling 1:1
|
||||
*
|
||||
* Mode:
|
||||
* Stream Mode: devices sends the data when it changs its state
|
||||
* Remote Mode: host polls the data periodically
|
||||
*
|
||||
* This code uses Remote Mode and polls the data with Read Data(0xEB).
|
||||
*
|
||||
* Data format:
|
||||
* byte|7 6 5 4 3 2 1 0
|
||||
* ----+--------------------------------------------------------------
|
||||
* 0|Yovflw Xovflw Ysign Xsign 1 Middle Right Left
|
||||
* 1| X movement
|
||||
* 2| Y movement
|
||||
*/
|
||||
|
@ -20,6 +20,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#define PS2_MOUSE_READ_DATA 0xEB
|
||||
|
||||
/*
|
||||
* Data format:
|
||||
* byte|7 6 5 4 3 2 1 0
|
||||
* ----+--------------------------------------------------------------
|
||||
* 0|Yovflw Xovflw Ysign Xsign 1 Middle Right Left
|
||||
* 1| X movement(0-255)
|
||||
* 2| Y movement(0-255)
|
||||
*/
|
||||
#define PS2_MOUSE_BTN_MASK 0x07
|
||||
#define PS2_MOUSE_BTN_LEFT 0
|
||||
#define PS2_MOUSE_BTN_RIGHT 1
|
||||
@ -29,16 +39,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define PS2_MOUSE_X_OVFLW 6
|
||||
#define PS2_MOUSE_Y_OVFLW 7
|
||||
|
||||
bool ps2_mouse_enable;
|
||||
extern uint8_t ps2_mouse_x;
|
||||
extern uint8_t ps2_mouse_y;
|
||||
extern uint8_t ps2_mouse_btn;
|
||||
extern uint8_t ps2_mouse_error_count;
|
||||
|
||||
/*
|
||||
* Scroll by mouse move with pressing button
|
||||
*/
|
||||
/* mouse button to start scrolling; set 0 to disable scroll */
|
||||
#ifndef PS2_MOUSE_SCROLL_BTN_MASK
|
||||
#define PS2_MOUSE_SCROLL_BTN_MASK (1<<PS2_MOUSE_BTN_MIDDLE)
|
||||
#endif
|
||||
/* send button event when button is released within this value(ms); set 0 to disable */
|
||||
#ifndef PS2_MOUSE_SCROLL_BTN_SEND
|
||||
#define PS2_MOUSE_SCROLL_BTN_SEND 300
|
||||
#endif
|
||||
/* divide virtical and horizontal mouse move by this to convert to scroll move */
|
||||
#ifndef PS2_MOUSE_SCROLL_DIVISOR_V
|
||||
#define PS2_MOUSE_SCROLL_DIVISOR_V 2
|
||||
#endif
|
||||
#ifndef PS2_MOUSE_SCROLL_DIVISOR_H
|
||||
#define PS2_MOUSE_SCROLL_DIVISOR_H 2
|
||||
#endif
|
||||
|
||||
|
||||
uint8_t ps2_mouse_init(void);
|
||||
uint8_t ps2_mouse_read(void);
|
||||
bool ps2_mouse_changed(void);
|
||||
void ps2_mouse_usb_send(void);
|
||||
void ps2_mouse_print(void);
|
||||
void ps2_mouse_task(void);
|
||||
|
||||
#endif
|
||||
|
@ -1,5 +1,5 @@
|
||||
/*
|
||||
Copyright 2010,2011 Jun WAKO <wakojun@gmail.com>
|
||||
Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
|
||||
|
||||
This software is licensed with a Modified BSD License.
|
||||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||||
@ -36,42 +36,16 @@ POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*
|
||||
Primitive PS/2 Library for AVR
|
||||
==============================
|
||||
Host side is only supported now.
|
||||
Synchronous USART is used to receive data by hardware process
|
||||
rather than interrupt. During V-USB interrupt runs, CLOCK interrupt
|
||||
cannot interpose. In the result it is prone to lost CLOCK edge.
|
||||
* PS/2 protocol USART version
|
||||
*/
|
||||
|
||||
|
||||
I/O control
|
||||
-----------
|
||||
High state is asserted by internal pull-up.
|
||||
If you have a signaling problem, you may need to have
|
||||
external pull-up resisters on CLOCK and DATA line.
|
||||
|
||||
|
||||
PS/2 References
|
||||
---------------
|
||||
http://www.computer-engineering.org/ps2protocol/
|
||||
http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
|
||||
*/
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include "ps2.h"
|
||||
#include "debug.h"
|
||||
#include "print.h"
|
||||
|
||||
|
||||
#if 0
|
||||
#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0)
|
||||
#define DEBUGP(x) do { PORTC = x; } while (0)
|
||||
#else
|
||||
#define DEBUGP_INIT()
|
||||
#define DEBUGP(x)
|
||||
#endif
|
||||
|
||||
#define WAIT(stat, us, err) do { \
|
||||
if (!wait_##stat(us)) { \
|
||||
ps2_error = err; \
|
||||
@ -83,49 +57,38 @@ http://www.mcamafia.de/pdf/ibm_hitrc07.pdf
|
||||
uint8_t ps2_error = PS2_ERR_NONE;
|
||||
|
||||
|
||||
static inline void clock_lo(void);
|
||||
static inline void clock_hi(void);
|
||||
static inline bool clock_in(void);
|
||||
static inline void data_lo(void);
|
||||
static inline void data_hi(void);
|
||||
static inline bool data_in(void);
|
||||
static inline uint16_t wait_clock_lo(uint16_t us);
|
||||
static inline uint16_t wait_clock_hi(uint16_t us);
|
||||
static inline uint16_t wait_data_lo(uint16_t us);
|
||||
static inline uint16_t wait_data_hi(uint16_t us);
|
||||
static inline void idle(void);
|
||||
static inline void inhibit(void);
|
||||
static inline uint8_t pbuf_dequeue(void);
|
||||
static inline void pbuf_enqueue(uint8_t data);
|
||||
static inline bool pbuf_has_data(void);
|
||||
static inline void pbuf_clear(void);
|
||||
|
||||
|
||||
void ps2_host_init(void)
|
||||
{
|
||||
DEBUGP_INIT();
|
||||
DEBUGP(0x1);
|
||||
idle();
|
||||
idle(); // without this many USART errors occur when cable is disconnected
|
||||
PS2_USART_INIT();
|
||||
PS2_USART_RX_INT_ON();
|
||||
// POR(150-2000ms) plus BAT(300-500ms) may take 2.5sec([3]p.20)
|
||||
//_delay_ms(2500);
|
||||
}
|
||||
|
||||
uint8_t ps2_host_send(uint8_t data)
|
||||
{
|
||||
uint8_t res = 0;
|
||||
bool parity = true;
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
|
||||
DEBUGP(0x6);
|
||||
PS2_USART_OFF();
|
||||
|
||||
/* terminate a transmission if we have */
|
||||
inhibit();
|
||||
_delay_us(100);
|
||||
_delay_us(100); // [4]p.13
|
||||
|
||||
/* start bit [1] */
|
||||
/* 'Request to Send' and Start bit */
|
||||
data_lo();
|
||||
clock_hi();
|
||||
WAIT(clock_lo, 15000, 1);
|
||||
/* data [2-9] */
|
||||
WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
|
||||
|
||||
/* Data bit[2-9] */
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
_delay_us(15);
|
||||
if (data&(1<<i)) {
|
||||
@ -137,15 +100,18 @@ uint8_t ps2_host_send(uint8_t data)
|
||||
WAIT(clock_hi, 50, 2);
|
||||
WAIT(clock_lo, 50, 3);
|
||||
}
|
||||
/* parity [10] */
|
||||
|
||||
/* Parity bit */
|
||||
_delay_us(15);
|
||||
if (parity) { data_hi(); } else { data_lo(); }
|
||||
WAIT(clock_hi, 50, 4);
|
||||
WAIT(clock_lo, 50, 5);
|
||||
/* stop bit [11] */
|
||||
|
||||
/* Stop bit */
|
||||
_delay_us(15);
|
||||
data_hi();
|
||||
/* ack [12] */
|
||||
|
||||
/* Ack */
|
||||
WAIT(data_lo, 50, 6);
|
||||
WAIT(clock_lo, 50, 7);
|
||||
|
||||
@ -153,134 +119,55 @@ uint8_t ps2_host_send(uint8_t data)
|
||||
WAIT(clock_hi, 50, 8);
|
||||
WAIT(data_hi, 50, 9);
|
||||
|
||||
res = ps2_host_recv_response();
|
||||
idle();
|
||||
PS2_USART_INIT();
|
||||
PS2_USART_RX_INT_ON();
|
||||
return ps2_host_recv_response();
|
||||
ERROR:
|
||||
idle();
|
||||
PS2_USART_INIT();
|
||||
PS2_USART_RX_INT_ON();
|
||||
return res;
|
||||
return 0;
|
||||
}
|
||||
|
||||
// Do polling data from keyboard to get response to last command.
|
||||
uint8_t ps2_host_recv_response(void)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
PS2_USART_INIT();
|
||||
PS2_USART_RX_POLL_ON();
|
||||
while (!PS2_USART_RX_READY)
|
||||
;
|
||||
data = PS2_USART_RX_DATA;
|
||||
PS2_USART_OFF();
|
||||
DEBUGP(0x9);
|
||||
return data;
|
||||
// Command may take 25ms/20ms at most([5]p.46, [3]p.21)
|
||||
uint8_t retry = 25;
|
||||
while (retry-- && !pbuf_has_data()) {
|
||||
_delay_ms(1);
|
||||
}
|
||||
return pbuf_dequeue();
|
||||
}
|
||||
|
||||
uint8_t ps2_host_recv(void)
|
||||
{
|
||||
return pbuf_dequeue();
|
||||
if (pbuf_has_data()) {
|
||||
ps2_error = PS2_ERR_NONE;
|
||||
return pbuf_dequeue();
|
||||
} else {
|
||||
ps2_error = PS2_ERR_NODATA;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
ISR(PS2_USART_RX_VECT)
|
||||
{
|
||||
DEBUGP(0x7);
|
||||
uint8_t error = PS2_USART_ERROR;
|
||||
// TODO: request RESEND when error occurs?
|
||||
uint8_t error = PS2_USART_ERROR; // USART error should be read before data
|
||||
uint8_t data = PS2_USART_RX_DATA;
|
||||
if (error) {
|
||||
DEBUGP(error>>2);
|
||||
} else {
|
||||
if (!error) {
|
||||
pbuf_enqueue(data);
|
||||
} else {
|
||||
xprintf("PS2 USART error: %02X data: %02X\n", error, data);
|
||||
}
|
||||
DEBUGP(0x8);
|
||||
}
|
||||
|
||||
/* send LED state to keyboard */
|
||||
void ps2_host_set_led(uint8_t led)
|
||||
{
|
||||
// send 0xED then keyboard keeps waiting for next LED data
|
||||
// and keyboard does not send any scan codes during waiting.
|
||||
// If fail to send LED data keyboard looks like being freezed.
|
||||
uint8_t retry = 3;
|
||||
while (retry-- && ps2_host_send(PS2_SET_LED) != PS2_ACK)
|
||||
;
|
||||
retry = 3;
|
||||
while (retry-- && ps2_host_send(led) != PS2_ACK)
|
||||
;
|
||||
}
|
||||
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
* static functions
|
||||
*------------------------------------------------------------------*/
|
||||
static inline void clock_lo()
|
||||
{
|
||||
PS2_CLOCK_PORT &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_DDR |= (1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline void clock_hi()
|
||||
{
|
||||
/* input with pull up */
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline bool clock_in()
|
||||
{
|
||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);
|
||||
PS2_CLOCK_PORT |= (1<<PS2_CLOCK_BIT);
|
||||
_delay_us(1);
|
||||
return PS2_CLOCK_PIN&(1<<PS2_CLOCK_BIT);
|
||||
}
|
||||
static inline void data_lo()
|
||||
{
|
||||
PS2_DATA_PORT &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_DDR |= (1<<PS2_DATA_BIT);
|
||||
}
|
||||
static inline void data_hi()
|
||||
{
|
||||
/* input with pull up */
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
|
||||
}
|
||||
static inline bool data_in()
|
||||
{
|
||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);
|
||||
PS2_DATA_PORT |= (1<<PS2_DATA_BIT);
|
||||
_delay_us(1);
|
||||
return PS2_DATA_PIN&(1<<PS2_DATA_BIT);
|
||||
}
|
||||
|
||||
static inline uint16_t wait_clock_lo(uint16_t us)
|
||||
{
|
||||
while (clock_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_clock_hi(uint16_t us)
|
||||
{
|
||||
while (!clock_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_data_lo(uint16_t us)
|
||||
{
|
||||
while (data_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
static inline uint16_t wait_data_hi(uint16_t us)
|
||||
{
|
||||
while (!data_in() && us) { asm(""); _delay_us(1); us--; }
|
||||
return us;
|
||||
}
|
||||
|
||||
/* idle state that device can send */
|
||||
static inline void idle(void)
|
||||
{
|
||||
clock_hi();
|
||||
data_hi();
|
||||
}
|
||||
|
||||
/* inhibit device to send */
|
||||
static inline void inhibit(void)
|
||||
{
|
||||
clock_lo();
|
||||
data_hi();
|
||||
ps2_host_send(0xED);
|
||||
ps2_host_send(led);
|
||||
}
|
||||
|
||||
|
||||
@ -293,9 +180,6 @@ static uint8_t pbuf_head = 0;
|
||||
static uint8_t pbuf_tail = 0;
|
||||
static inline void pbuf_enqueue(uint8_t data)
|
||||
{
|
||||
if (!data)
|
||||
return;
|
||||
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
uint8_t next = (pbuf_head + 1) % PBUF_SIZE;
|
||||
@ -303,11 +187,10 @@ static inline void pbuf_enqueue(uint8_t data)
|
||||
pbuf[pbuf_head] = data;
|
||||
pbuf_head = next;
|
||||
} else {
|
||||
debug("pbuf: full\n");
|
||||
print("pbuf: full\n");
|
||||
}
|
||||
SREG = sreg;
|
||||
}
|
||||
|
||||
static inline uint8_t pbuf_dequeue(void)
|
||||
{
|
||||
uint8_t val = 0;
|
||||
@ -322,3 +205,18 @@ static inline uint8_t pbuf_dequeue(void)
|
||||
|
||||
return val;
|
||||
}
|
||||
static inline bool pbuf_has_data(void)
|
||||
{
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
bool has_data = (pbuf_head != pbuf_tail);
|
||||
SREG = sreg;
|
||||
return has_data;
|
||||
}
|
||||
static inline void pbuf_clear(void)
|
||||
{
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
pbuf_head = pbuf_tail = 0;
|
||||
SREG = sreg;
|
||||
}
|
||||
|
Reference in New Issue
Block a user