9 years ago · 72b080539b
--- a/keyboard/tentapad/Makefile
+++ b/keyboard/tentapad/Makefile
@@ -0,0 +1,153 @@
 #----------------------------------------------------------------------------
 # On command line:
 #
 # make all = Make software.
 #
 # make clean = Clean out built project files.
 #
 # make coff = Convert ELF to AVR COFF.
 #
 # make extcoff = Convert ELF to AVR Extended COFF.
 #
 # make program = Download the hex file to the device.
 # Please customize your programmer settings(PROGRAM_CMD)
 #
 # make teensy = Download the hex file to the device, using teensy_loader_cli.
 # (must have teensy_loader_cli installed).
 #
 # make dfu = Download the hex file to the device, using dfu-programmer (must
 # have dfu-programmer installed).
 #
 # make flip = Download the hex file to the device, using Atmel FLIP (must
 # have Atmel FLIP installed).
 #
 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
 # (must have dfu-programmer installed).
 #
 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
 # (must have Atmel FLIP installed).
 #
 # make debug = Start either simulavr or avarice as specified for debugging, 
 # with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
 #
 # make filename.i = Create a preprocessed source file for use in submitting
 # bug reports to the GCC project.
 #
 # To rebuild project do "make clean" then "make all".
 #----------------------------------------------------------------------------

 # Target file name (without extension).
 TARGET = tentapad_lufa

 # Directory common source filess exist
 TOP_DIR = ../..

 # Directory keyboard dependent files exist
 TARGET_DIR = .

 # project specific files
 SRC = keymap_common.c \
 matrix.c \
 led.c \
 backlight.c \
 ledmap.c

 ifdef KEYMAP
 SRC := keymap_$(KEYMAP).c $(SRC)
 else
 SRC := keymap_default.c $(SRC)
 endif


 CONFIG_H = config.h


 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u2

 # Processor frequency.
 # This will define a symbol, F_CPU, in all source code files equal to the
 # processor frequency in Hz. You can then use this symbol in your source code to
 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 # automatically to create a 32-bit value in your source code.
 #
 # This will be an integer division of F_USB below, as it is sourced by
 # F_USB after it has run through any CPU prescalers. Note that this value
 # does not *change* the processor frequency - it should merely be updated to
 # reflect the processor speed set externally so that the code can use accurate
 # software delays.
 F_CPU = 16000000


 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8

 # Input clock frequency.
 # This will define a symbol, F_USB, in all source code files equal to the
 # input clock frequency (before any prescaling is performed) in Hz. This value may
 # differ from F_CPU if prescaling is used on the latter, and is required as the
 # raw input clock is fed directly to the PLL sections of the AVR for high speed
 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 # at the end, this will be done automatically to create a 32-bit value in your
 # source code.
 #
 # If no clock division is performed on the input clock inside the AVR (via the
 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)

 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT


 # Boot Section Size in *bytes*
 # Teensy halfKay 512
 # Teensy++ halfKay 1024
 # Atmel DFU loader 4096
 # LUFA bootloader 4096
 # USBaspLoader 2048
 OPT_DEFS += -DBOOTLOADER_SIZE=4096

 # Additional definitions from command line
 ifdef DEFS
 OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF))
 endif

 # Build Options
 # comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
 CONSOLE_ENABLE = yes # Console for debug(+400)
 COMMAND_ENABLE = yes # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes # USB Nkey Rollover
 USB_6KRO_ENABLE = yes # USB 6key Rollover
 PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
 PS2_USE_BUSYWAIT = yes
 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
 KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom
 #KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor
 SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight
 BREATHING_LED_ENABLE = yes # Enable breathing backlight
 #LEDMAP_ENABLE = yes # Enable LED mapping
 #LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom


 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax

 # Search Path
 VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)

 include $(TOP_DIR)/protocol/lufa.mk
 include $(TOP_DIR)/protocol.mk
 include $(TOP_DIR)/common.mk
 include $(TOP_DIR)/rules.mk
--- a/keyboard/tentapad/Makefile.pjrc
+++ b/keyboard/tentapad/Makefile.pjrc
@@ -0,0 +1,119 @@
 #----------------------------------------------------------------------------
 # On command line:
 #
 # make all = Make software.
 #
 # make clean = Clean out built project files.
 #
 # make coff = Convert ELF to AVR COFF.
 #
 # make extcoff = Convert ELF to AVR Extended COFF.
 #
 # make program = Download the hex file to the device.
 # Please customize your programmer settings(PROGRAM_CMD)
 #
 # make teensy = Download the hex file to the device, using teensy_loader_cli.
 # (must have teensy_loader_cli installed).
 #
 # make dfu = Download the hex file to the device, using dfu-programmer (must
 # have dfu-programmer installed).
 #
 # make flip = Download the hex file to the device, using Atmel FLIP (must
 # have Atmel FLIP installed).
 #
 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
 # (must have dfu-programmer installed).
 #
 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
 # (must have Atmel FLIP installed).
 #
 # make debug = Start either simulavr or avarice as specified for debugging, 
 # with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
 #
 # make filename.i = Create a preprocessed source file for use in submitting
 # bug reports to the GCC project.
 #
 # To rebuild project do "make clean" then "make all".
 #----------------------------------------------------------------------------

 # Target file name (without extension).
 TARGET = tentapad_pjrc

 # Directory common source filess exist
 TOP_DIR = ../..

 # Directory keyboard dependent files exist
 TARGET_DIR = .

 # project specific files
 SRC = keymap_common.c \
 matrix.c \
 led.c \
 backlight.c \
 ledmap.c

 ifdef KEYMAP
 SRC := keymap_$(KEYMAP).c $(SRC)
 else
 SRC := keymap_default.c $(SRC)
 endif

 CONFIG_H = config.h


 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
 MCU = atmega32u2
 #MCU = at90usb1286


 # Processor frequency.
 # Normally the first thing your program should do is set the clock prescaler,
 # so your program will run at the correct speed. You should also set this
 # variable to same clock speed. The _delay_ms() macro uses this, and many
 # examples use this variable to calculate timings. Do not add a "UL" here.
 F_CPU = 16000000


 # Boot Section Size in *bytes*
 # Teensy halfKay 512
 # Atmel DFU loader 4096
 # LUFA bootloader 4096
 OPT_DEFS += -DBOOTLOADER_SIZE=4096

 # Additional definitions from command line
 ifdef DEFS
 OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF))
 endif

 # Build Options
 # comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
 CONSOLE_ENABLE = yes # Console for debug(+400)
 COMMAND_ENABLE = yes # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes # USB Nkey Rollover
 USB_6KRO_ENABLE = yes # USB 6key Rollover
 PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
 PS2_USE_BUSYWAIT = yes
 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
 KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom
 #KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor
 SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight
 BREATHING_LED_ENABLE = yes # Enable breathing backlight
 #LEDMAP_ENABLE = yes # Enable LED mapping
 #LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom


 # Search Path
 VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)

 include $(TOP_DIR)/protocol/pjrc.mk
 include $(TOP_DIR)/common.mk
 include $(TOP_DIR)/rules.mk
--- a/keyboard/tentapad/backlight.c
+++ b/keyboard/tentapad/backlight.c
@@ -0,0 +1,78 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <avr/pgmspace.h>
 #include "backlight.h"
 #include "softpwm_led.h"

 #ifdef BACKLIGHT_ENABLE

 static const uint8_t backlight_table[] PROGMEM = {
 0, 16, 128, 255
 };

 void backlight_set(uint8_t level)
 {
 switch (level) {
 case 1:
 case 2:
 case 3:
 softpwm_led_enable();
 breathing_led_disable_all();
 softpwm_led_set_all(pgm_read_byte(&backlight_table[level]));
 break;
 case 4:
 case 5:
 case 6:
 softpwm_led_enable();
 breathing_led_enable_all();
 breathing_led_set_duration_all(6 - level);
 break;
 case 0:
 default:
 breathing_led_disable_all();
 softpwm_led_disable();
 break;
 }
 }

 #ifndef LEDMAP_ENABLE
 void softpwm_led_init(void)
 {
 DDRD |= (1<<PD0);
 DDRB |= (1<<PB7);
 DDRC |= (1<<PD5 | 1<<PD6);
 }

 void softpwm_led_on(uint8_t index)
 {
 PORTD |= (1<<PD0);
 PORTB |= (1<<PB7);
 PORTC |= (1<<PD5 | 1<<PD6);
 }

 void softpwm_led_off(uint8_t index)
 {
 PORTD &= ~(1<<PD0);
 PORTB &= ~(1<<PB7);
 PORTC &= ~(1<<PD5 | 1<<PD6);
 }
 #endif

 #endif
--- a/keyboard/tentapad/config.h
+++ b/keyboard/tentapad/config.h
@@ -0,0 +1,96 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #ifndef CONFIG_H
 #define CONFIG_H


 /* USB Device descriptor parameter */
 #define VENDOR_ID 0x16c0
 #define PRODUCT_ID 0x27db
 #define DEVICE_VER 0x0008
 #define MANUFACTURER [email protected]
 #define PRODUCT TentaPad
 #define DESCRIPTION t.m.k. keyboard firmware for TentaPad

 /* key matrix size */
 #define MATRIX_ROWS 1
 #define MATRIX_COLS 5

 /* keymap in eeprom */
 #define FN_ACTIONS_COUNT 32
 #define KEYMAPS_COUNT 32

 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST

 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5

 /* number of backlight levels */
 #ifdef BREATHING_LED_ENABLE
 #define BACKLIGHT_LEVELS 6
 #else
 #define BACKLIGHT_LEVELS 3
 #endif

 /* number of LEDs */
 #define LED_COUNT 4

 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE

 /* key combination for command */
 #define IS_COMMAND() ( \
 keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

 /* PS2 mouse support */
 #ifdef PS2_MOUSE_ENABLE
 #define PS2_CLOCK_PORT PORTD
 #define PS2_CLOCK_PIN PIND
 #define PS2_CLOCK_DDR DDRD
 #define PS2_CLOCK_BIT PD3

 #define PS2_DATA_PORT PORTD
 #define PS2_DATA_PIN PIND
 #define PS2_DATA_DDR DDRD
 #define PS2_DATA_BIT PD4
 #endif

 /*
 * Feature disable options
 * These options are also useful to firmware size reduction.
 */

 /* disable debug print */
 //#define NO_DEBUG

 /* disable print */
 //#define NO_PRINT

 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION

 #endif
--- a/keyboard/tentapad/keymap_common.c
+++ b/keyboard/tentapad/keymap_common.c
@@ -0,0 +1,50 @@
 /*
 Copyright 2012,2013 Jun Wako <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */
 #include "keymap_common.h"


 /* translates key to keycode */
 uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
 {
 #ifndef KEYMAP_IN_EEPROM_ENABLE
 return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
 #else
 return eeconfig_read_keymap_key(layer, key.row, key.col);
 #endif
 }

 /* translates Fn keycode to action */
 action_t keymap_fn_to_action(uint8_t keycode)
 {
 return (action_t) {
 #ifndef KEYMAP_IN_EEPROM_ENABLE
 .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)])
 #else
 .code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode))
 #endif
 };
 }

 #ifdef KEYMAP_IN_EEPROM_ENABLE
 const uint8_t* keymaps_pointer(void) {
 return (const uint8_t*)keymaps;
 }

 const uint16_t* fn_actions_pointer(void) {
 return fn_actions;
 }
 #endif
--- a/keyboard/tentapad/keymap_common.h
+++ b/keyboard/tentapad/keymap_common.h
@@ -0,0 +1,46 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #ifndef KEYMAP_COMMON_H
 #define KEYMAP_COMMON_H

 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/pgmspace.h>
 #include "keycode.h"
 #include "action.h"
 #include "action_macro.h"
 #include "report.h"
 #include "host.h"
 #include "print.h"
 #include "debug.h"
 #include "keymap.h"
 #include "keymap_in_eeprom.h"


 extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
 extern const uint16_t fn_actions[];

 /* TentaPad keymap definition macro
 */
 #define KEYMAP( \
 K1, K2, TT, TP, FN \
 ) { \
 { KC_##K1, KC_##K2, KC_##TT, KC_##TP, KC_##FN } \
 }

 #endif
--- a/keyboard/tentapad/keymap_default.c
+++ b/keyboard/tentapad/keymap_default.c
@@ -0,0 +1,105 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #include "keymap_common.h"

 enum function_id {
 CONFIG_MODE = 0,
 SWITCH_LAYOUT,
 SWITCH_BACKLIGHT
 };

 enum {
 CONFIG_LAYER = 31,
 };

 // Default
 #ifdef KEYMAP_SECTION_ENABLE
 const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
 #else
 const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
 #endif
 [0] = KEYMAP( Z, X, ESC, NO, FN0 ),
 [1] = KEYMAP( BTN1,BTN2,ESC, NO, FN0 ),
 [2] = KEYMAP( LEFT,RGHT,ESC, NO, FN0 ),
 [3] = KEYMAP( UP, DOWN,ESC, NO, FN0 ),
 [4] = KEYMAP( PGUP,PGDN,ESC, NO, FN0 ),
 [5] = KEYMAP( SPC, ESC, ESC, NO, FN0 ),
 [CONFIG_LAYER] = KEYMAP( FN1, FN2, NO, NO, FN0 ),
 };

 /*
 * Fn action definition
 */
 #ifdef KEYMAP_SECTION_ENABLE
 const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = {
 #else
 const uint16_t fn_actions[] PROGMEM = {
 #endif
 [0] = ACTION_FUNCTION(CONFIG_MODE),
 [1] = ACTION_FUNCTION(SWITCH_LAYOUT),
 [2] = ACTION_FUNCTION(SWITCH_BACKLIGHT)
 };

 #ifdef KEYMAP_IN_EEPROM_ENABLE
 uint16_t keys_count(void) {
 return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS;
 }

 uint16_t fn_actions_count(void) {
 return sizeof(fn_actions) / sizeof(fn_actions[0]);
 }
 #endif

 void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
 static uint8_t config_mode = 0;
 static uint8_t layer = 0;
 static uint8_t backlight = 0;
 switch (id) {
 case CONFIG_MODE:
 if (record->event.pressed) {
 if (config_mode) {
 config_mode = 0;
 layer_off(CONFIG_LAYER);
 }
 else {
 config_mode = 1;
 layer = 0;
 backlight = 0;
 layer_on(CONFIG_LAYER);
 }
 }
 break;
 case SWITCH_LAYOUT:
 if (record->event.pressed) {
 if (config_mode) {
 default_layer_set(1UL<<layer);
 layer = (layer + 1) % 6;
 }
 }
 break;
 case SWITCH_BACKLIGHT:
 if (record->event.pressed) {
 if (config_mode) {
 backlight_level(backlight);
 backlight = (backlight + 1) % BACKLIGHT_LEVEL;
 }
 }
 break;
 }
 }
--- a/keyboard/tentapad/led.c
+++ b/keyboard/tentapad/led.c
@@ -0,0 +1,27 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #include <avr/io.h>
 #include "stdint.h"
 #include "led.h"


 #ifndef LEDMAP_ENABLE
 void led_set(uint8_t usb_led)
 {
 }
 #endif
--- a/keyboard/tentapad/ledmap.c
+++ b/keyboard/tentapad/ledmap.c
@@ -0,0 +1,79 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 #include <avr/pgmspace.h>
 #include "ledmap.h"


 #ifdef LEDMAP_ENABLE

 static const uint8_t ledmaps[LED_COUNT] PROGMEM = {
 [0] = LEDMAP_BACKLIGHT,
 [1] = LEDMAP_BACKLIGHT,
 [2] = LEDMAP_BACKLIGHT,
 [3] = LEDMAP_BACKLIGHT
 };

 uint8_t ledmap_get_code(uint8_t index)
 {
 return pgm_read_byte(&ledmaps[index]);
 }

 void ledmap_led_init(void)
 {
 DDRD |= (1<<PD0);
 DDRB |= (1<<PB7);
 DDRC |= (1<<PD5 | 1<<PD6);
 }

 void ledmap_led_on(uint8_t index)
 {
 switch (index) {
 case 0:
 PORTD |= (1<<PD0);
 break;
 case 1:
 PORTB |= (1<<PB7);
 break;
 case 2:
 PORTC |= (1<<PC6);
 break;
 case 3:
 PORTC |= (1<<PC5);
 break;
 }
 }

 void ledmap_led_off(uint8_t index)
 {
 switch (index) {
 case 0:
 PORTD &= ~(1<<PD0);
 break;
 case 1:
 PORTB &= ~(1<<PB7);
 break;
 case 2:
 PORTC &= ~(1<<PC6);
 break;
 case 3:
 PORTC &= ~(1<<PC5);
 break;
 }
 }

 #endif
--- a/keyboard/tentapad/matrix.c
+++ b/keyboard/tentapad/matrix.c
@@ -0,0 +1,169 @@
 /*
 Copyright 2014 Kai Ryu <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

 /*
 * scan matrix
 */
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/io.h>
 #include <util/delay.h>
 #include "print.h"
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
 #ifdef PS2_MOUSE_ENABLE
 #include "ps2.h"
 #endif


 #ifndef DEBOUNCE
 # define DEBOUNCE 5
 #endif
 static uint8_t debouncing = DEBOUNCE;

 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix;
 static matrix_row_t matrix_debouncing;

 static matrix_row_t read_cols(void);
 static void init_cols(void);

 #ifdef PS2_MOUSE_ENABLE
 static uint8_t ps2_mouse_detected;

 uint8_t ps2_enabled(void)
 {
 return ps2_mouse_detected;
 }
 #endif

 inline
 uint8_t matrix_rows(void)
 {
 return MATRIX_ROWS;
 }

 inline
 uint8_t matrix_cols(void)
 {
 return MATRIX_COLS;
 }

 void matrix_init(void)
 {
 #ifdef PS2_MOUSE_ENABLE
 // ps2 mouse detect
 DDRC &= ~(1<<PC2);
 PORTC |= (1<<PC2);
 if (PINC & (1<<PC2)) {
 ps2_mouse_detected = 0;
 }
 else {
 ps2_mouse_detected = 1;
 }
 PORTC &= ~(1<<PC2);
 #endif

 // initialize cols
 init_cols();

 // initialize matrix state: all keys off
 matrix = 0;
 matrix_debouncing = 0;
 }

 uint8_t matrix_scan(void)
 {
 matrix_row_t cols = read_cols();
 if (matrix_debouncing != cols) {
 matrix_debouncing = cols;
 if (debouncing) {
 debug("bounce!: "); debug_hex(debouncing); debug("\n");
 }
 debouncing = DEBOUNCE;
 }

 if (debouncing) {
 if (--debouncing) {
 _delay_ms(1);
 } else {
 matrix = matrix_debouncing;
 }
 }

 return 1;
 }

 bool matrix_is_modified(void)
 {
 if (debouncing) return false;
 return true;
 }

 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
 return (matrix & ((matrix_row_t)1<<col));
 }

 inline
 matrix_row_t matrix_get_row(uint8_t row)
 {
 return matrix;
 }

 void matrix_print(void)
 {
 print("\nr/c 0123456789ABCDEF\n");
 for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
 phex(row); print(": ");
 pbin_reverse16(matrix_get_row(row));
 print("\n");
 }
 }

 uint8_t matrix_key_count(void)
 {
 return bitpop16(matrix);
 }

 /* Column pin configuration
 * col: 0 1 2 3 4
 * pin: D1 D2 D5 D6 B3
 */
 static void init_cols(void)
 {
 // Input with pull-up(DDR:0, PORT:1)
 DDRD &= ~(1<<PD1 | 1<<PD2 | 1<<PD5 | 1<<PD6);
 PORTD |= (1<<PD1 | 1<<PD2 | 1<<PD5 | 1<<PD6);
 DDRB &= ~(1<<PB3);
 PORTB |= (1<<PB3);
 }

 /* Column pin configuration
 * col: 0 1 2 3 4
 * pin: D1 D2 D5 D6 B3
 */
 static matrix_row_t read_cols(void)
 {
 return (PIND&(1<<PD1) ? 0 : (1<<0)) |
 (PIND&(1<<PD2) ? 0 : (1<<1)) |
 (PIND&(1<<PD5) ? 0 : (1<<2)) |
 (PIND&(1<<PD6) ? 0 : (1<<3)) |
 (PINB&(1<<PB3) ? 0 : (1<<4));
 }