diff --git a/keyboard/RedScarfIII/Makefile b/keyboard/RedScarfIII/Makefile new file mode 100644 index 00000000..415ffd72 --- /dev/null +++ b/keyboard/RedScarfIII/Makefile @@ -0,0 +1,156 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = RedScarfIII_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c \ + ledmap.c \ + yc059.c \ + rgb.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_default.c $(SRC) +endif + + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +USB_6KRO_ENABLE = yes # USB 6key Rollover +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_BUSYWAIT = yes +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom +#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight +FADING_LED_ENABLE = yes # Enable fading backlight +BREATHING_LED_ENABLE = yes # Enable breathing backlight +LEDMAP_ENABLE = yes # Enable LED mapping +LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/RedScarfIII/Makefile.pjrc b/keyboard/RedScarfIII/Makefile.pjrc new file mode 100644 index 00000000..f089f1ec --- /dev/null +++ b/keyboard/RedScarfIII/Makefile.pjrc @@ -0,0 +1,120 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = RedScarfIII_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c \ + ledmap.c \ + yc059.c \ + rgb.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_default.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom +#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight +FADING_LED_ENABLE = yes # Enable fading backlight +BREATHING_LED_ENABLE = yes # Enable breathing backlight +LEDMAP_ENABLE = yes # Enable LED mapping +LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/RedScarfIII/backlight.c b/keyboard/RedScarfIII/backlight.c new file mode 100644 index 00000000..c2aa615f --- /dev/null +++ b/keyboard/RedScarfIII/backlight.c @@ -0,0 +1,204 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include +#include "backlight.h" +#ifdef SOFTPWM_LED_ENABLE +#include "softpwm_led.h" +#else +#include "breathing_led.h" +#endif +#include "action.h" + +#ifdef BACKLIGHT_ENABLE + +static const uint8_t backlight_table[] PROGMEM = { + 0, 16, 128, 255 +}; + +inline void backlight_set_raw(uint8_t raw); + +#ifdef SOFTPWM_LED_ENABLE +#ifdef FADING_LED_ENABLE +static uint8_t backlight_mode; +#endif +#endif + +/* Backlight pin configuration + * PWM: PB7(OC1C) + */ +#ifndef SOFTPWM_LED_ENABLE +void backlight_enable(void) +{ + // Turn on PWM + cli(); + DDRB |= (1< 0) { + backlight_enable(); + backlight_set_raw(pgm_read_byte(&backlight_table[level])); + } + else { + backlight_disable(); + } +#endif + +} + +#ifndef SOFTPWM_LED_ENABLE +#ifdef BREATHING_LED_ENABLE +void breathing_led_set_raw(uint8_t raw) +{ + backlight_set_raw(raw); +} +#endif +#endif + +inline void backlight_set_raw(uint8_t raw) +{ +#ifdef SOFTPWM_LED_ENABLE + softpwm_led_set_all(raw); +#else + OCR1C = raw; +#endif +} + +#ifndef LEDMAP_ENABLE +#ifdef SOFTPWM_LED_ENABLE +void softpwm_led_init(void) +{ + DDRB |= (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5253 +#define PRODUCT_ID 0x0003 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Young Pioneers +#define PRODUCT Red Scarf III +#define DESCRIPTION t.m.k. keyboard firmware for Red Scarf III + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 18 + +/* keymap in eeprom */ +#define FN_ACTIONS_COUNT 32 +#define KEYMAPS_COUNT 8 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* number of backlight levels */ +#ifdef BREATHING_LED_ENABLE +#ifdef FADING_LED_ENABLE +#define BACKLIGHT_LEVELS 8 +#else +#define BACKLIGHT_LEVELS 6 +#endif +#else +#define BACKLIGHT_LEVELS 3 +#endif +#define BACKLIGHT_CUSTOM + +/* number of leds */ +#define LED_COUNT 4 +#define EECONFIG_LEDMAP_IN_EEPROM 8 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/RedScarfIII/keymap_common.c b/keyboard/RedScarfIII/keymap_common.c new file mode 100644 index 00000000..5d03cffe --- /dev/null +++ b/keyboard/RedScarfIII/keymap_common.c @@ -0,0 +1,49 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "keymap_common.h" + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ +#ifndef KEYMAP_IN_EEPROM_ENABLE + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +#else + return eeconfig_read_keymap_key(layer, key.row, key.col); +#endif +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t) { +#ifndef KEYMAP_IN_EEPROM_ENABLE + .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) +#else + .code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) +#endif + }; +} + +#ifdef KEYMAP_IN_EEPROM_ENABLE +const uint8_t* keymaps_pointer(void) { + return (const uint8_t*)keymaps; +} + +const uint16_t* fn_actions_pointer(void) { + return fn_actions; +} +#endif diff --git a/keyboard/RedScarfIII/keymap_common.h b/keyboard/RedScarfIII/keymap_common.h new file mode 100644 index 00000000..dd0003ef --- /dev/null +++ b/keyboard/RedScarfIII/keymap_common.h @@ -0,0 +1,91 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include +#include +#include +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" +#include "keymap_in_eeprom.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +/* RedScarfIII keymap definition macro + * K3B and K2M are extra keys for ISO + */ +#define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{ \ + { KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F, KC_##K0G, KC_##K0H, KC_##K0I, KC_##K0J, KC_##K0K, KC_##K0L, KC_##K0M, KC_##K0N, KC_##K0P, KC_##K0Q, KC_##K0R, KC_##K0S }, \ + { KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_##K1M, KC_##K1N, KC_##K1P, KC_##K1Q, KC_##K1R, KC_##K1S }, \ + { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2P, KC_##K2Q, KC_##K2R, KC_##K2S }, \ + { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3P, KC_##K3Q, KC_##K3R, KC_##K3S }, \ + { KC_##K4A, KC_##K4B, KC_##K4C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4P, KC_##K4Q, KC_##K4R, KC_##K4S }, \ + { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5P, KC_##K5Q, KC_##K5R, KC_##K5S } \ +} + +/* 84 layout. Cut-off right part */ +#define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valiant. No extra keys for ISO */ +#define KEYMAP_ANSI( \ + K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, K5Q, K5R, K5S, K4I, \ + K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ + K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, \ + K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, K2Q, K2R, K2S, \ + K3A, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, \ + K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ +) KEYMAP_NORMAL( \ + K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, K5Q, K5R, K5S, K4I, \ + K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ + K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, NO, \ + K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, NO, K2N, K2P, K2Q, K2R, K2S, \ + K3A, NO, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, NO, \ + K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ +) + +#endif diff --git a/keyboard/RedScarfIII/keymap_default.c b/keyboard/RedScarfIII/keymap_default.c new file mode 100644 index 00000000..869d4229 --- /dev/null +++ b/keyboard/RedScarfIII/keymap_default.c @@ -0,0 +1,162 @@ +#include "keymap_common.h" +#include "rgb.h" + +// Default +#ifdef KEYMAP_SECTION_ENABLE +const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { +#endif + /* Keymap 0: Default Layer + * ,---------------------------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Psc|Pau|Ins|Del|PgU|PgD| + * |-----------------------------------------------------------+---+---+---+---| + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Num| /| *| -| + * |-----------------------------------------------------------+---+---+---+---| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| 7| 8| 9| | + * |-----------------------------------------------------------+---+---+---| +| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | 4| 5| 6| | + * |-----------------------------------------------------------+---+---+---+---| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| 1| 2| 3| | + * |-----------------------------------------------------------+---+---+---|Ent| + * |Ctrl|Gui |Alt | Space |Alt |Fn0 |Gui |Ctrl| 0| 0| .| | + * `---------------------------------------------------------------------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,PAUS,INS, DEL, PGUP,PGDN, \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,NLCK,PSLS,PAST,PMNS, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS,P7, P8, P9, PPLS, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,GRV, ENT, P4, P5, P6, PPLS, \ + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT,FN0, P1, P2, P3, PENT, \ + LCTL,LGUI,LALT, SPC, RALT,FN0, RGUI, RCTL,P0, P0, PDOT,PENT ), + /* Keymap 1: Fn Layer + * ,---------------------------------------------------------------------------. + * | *4| *5| *6| *7| *8|*21|*22|*23|*24| | | | | | | | | | | + * |-----------------------------------------------------------+---+---+---+---| + * | | *9|*10|*11| | | | | | | |*25|*26| | | | | | + * |-----------------------------------------------------------+---+---+---+---| + * | |*12|*13|*14| | |Cal| |Ins| |Psc|Slk|Pau| | | | | | + * |-----------------------------------------------------------|---+---+---| | + * | |*15|*16|*17| | | | | | |Hom|PgU| | | | | | + * |-----------------------------------------------------------|---+---+---+---| + * | |*18|*19|*20|Fn1|Fn2|VoD|VoU|Mut|End|PgD| | | | | | | + * |-----------------------------------------------------------+---+---+---| | + * | | | | Fn3 | | | | | | | | | + * `---------------------------------------------------------------------------' + */ + KEYMAP( + FN4 ,FN5 ,FN6 ,FN7 ,FN8 ,FN21,FN22,FN23,FN24,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,FN9 ,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN25,FN26, TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,FN12,FN13,FN14,TRNS,TRNS,CALC,TRNS,INS, TRNS,PSCR,SLCK,PAUS, TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,FN15,FN16,FN17,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,FN18,FN19,FN20,FN1, FN2, VOLD,VOLU,MUTE,END, PGDN, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS, FN3, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS ), + /* Keymap 2: Arrow key Overlayer + * ,---------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------+---+---+---+---| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------+---+---+---+---| + * | | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------+---+---+---| | + * | | | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------+---+---+---+---| + * | | | | | | | | | | | | | |Up | | | + * |-----------------------------------------------------------+---+---+---| | + * | | | | | | | | |Lef|Dow|Rig| | + * `---------------------------------------------------------------------------' + */ + KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,UP, TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,LEFT,DOWN,RGHT,TRNS ), +}; + +enum function_id { + AF_RGB_ON = 0, + AF_RGB_OFF, + AF_RGB_TOGGLE, + AF_RGB_INCREASE, + AF_RGB_DECREASE, + AF_RGB_STATIC, + AF_RGB_ANIMATE +}; + +/* + * Fn action definition + */ +#ifdef KEYMAP_SECTION_ENABLE +const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = { +#else +const uint16_t fn_actions[] PROGMEM = { +#endif + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_BACKLIGHT_TOGGLE(), + [2] = ACTION_BACKLIGHT_STEP(), + [3] = ACTION_LAYER_TOGGLE(2), + [4] = ACTION_FUNCTION(AF_RGB_TOGGLE), + [5] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED), + [6] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN), + [7] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE), + [8] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_WHITE), + [9] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_1), + [10] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_1), + [11] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_1), + [12] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_2), + [13] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_2), + [14] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_2), + [15] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_3), + [16] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_3), + [17] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_3), + [18] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_4), + [19] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_4), + [20] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_4), + [21] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_FLASH), + [22] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_STROBE), + [23] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_FADE), + [24] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_SMOOTH), + [25] = ACTION_FUNCTION(AF_RGB_DECREASE), + [26] = ACTION_FUNCTION(AF_RGB_INCREASE) +}; + +#ifdef KEYMAP_IN_EEPROM_ENABLE +uint16_t keys_count(void) { + return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS; +} + +uint16_t fn_actions_count(void) { + return sizeof(fn_actions) / sizeof(fn_actions[0]); +} +#endif + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (record->event.pressed) { + switch (id) { + case AF_RGB_ON: + rgb_on(); + break; + case AF_RGB_OFF: + rgb_off(); + break; + case AF_RGB_TOGGLE: + rgb_toggle(); + break; + case AF_RGB_INCREASE: + rgb_increase(); + break; + case AF_RGB_DECREASE: + rgb_decrease(); + break; + case AF_RGB_STATIC: + rgb_set(RGB_STATIC, opt); + break; + case AF_RGB_ANIMATE: + rgb_set(RGB_ANIMATE, opt); + break; + } + } +} diff --git a/keyboard/RedScarfIII/led.c b/keyboard/RedScarfIII/led.c new file mode 100644 index 00000000..4d4439e9 --- /dev/null +++ b/keyboard/RedScarfIII/led.c @@ -0,0 +1,62 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + +#ifndef LEDMAP_ENABLE + +/* LED pin configuration + * CapsLock: PC7 + * NumLock: PE6 + */ +void led_set(uint8_t usb_led) +{ + if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "ledmap.h" + +#ifdef LEDMAP_ENABLE + +static const uint16_t ledmaps[LED_COUNT] PROGMEM = { + [0] = LEDMAP_CAPS_LOCK | LEDMAP_BACKLIGHT, // CapsLock + [1] = LEDMAP_NUM_LOCK | LEDMAP_BACKLIGHT, // NumLock + [2] = LEDMAP_BACKLIGHT, // Backlight +}; + +ledmap_t ledmap_get_code(uint8_t index) +{ + return (ledmap_t) { .code = pgm_read_word(&ledmaps[index]) }; +} + +/* LED pin configration + * CapsLock: PC7 + * NumLock: PE6 + * Backlight: PB7 + */ +void ledmap_led_init(void) +{ + DDRC |= (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "rgb.h" +#include "matrix.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void init_rows(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // disable JTAG + MCUCR = (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "yc059.h" +#include "rgb.h" + +static rgb_config_t rgb_config; + +void rgb_init(void) +{ + yc059_init(); + rgb_read_config(); + if (rgb_config.raw == RGB_UNCONFIGURED) { + rgb_config.enable = 0; + rgb_config.mode = RGB_STATIC; + rgb_config.id = RGB_STATIC_WHITE; + rgb_write_config(); + } + yc059_send(rgb_config.enable ? YC059_ON : YC059_OFF); + rgb_resume(); +} + +void rgb_resume(void) +{ + yc059_send(rgb_to_yc059(rgb_config.mode, rgb_config.id)); +} + +void rgb_read_config(void) +{ + rgb_config.raw = eeprom_read_byte(EECONFIG_RGB); +} + +void rgb_write_config(void) +{ + eeprom_write_byte(EECONFIG_RGB, rgb_config.raw); +} + +void rgb_on(void) +{ + rgb_config.enable = 1; + yc059_send(YC059_ON); + rgb_resume(); + rgb_write_config(); +} + +void rgb_off(void) +{ + rgb_config.enable = 0; + yc059_send(YC059_OFF); + rgb_write_config(); +} + +void rgb_toggle(void) +{ + rgb_config.enable ^= 1; + yc059_send(rgb_config.enable ? YC059_ON : YC059_OFF); + rgb_resume(); + rgb_write_config(); +} + +void rgb_increase(void) +{ + yc059_send(YC059_INCREASE); +} + +void rgb_decrease(void) +{ + yc059_send(YC059_DECREASE); +} + +void rgb_set(uint8_t mode, uint8_t id) +{ + if (rgb_config.enable) { + rgb_config.mode = mode; + rgb_config.id = id; + rgb_resume(); + rgb_write_config(); + } +} + +uint8_t rgb_to_yc059(uint8_t mode, uint8_t id) +{ + switch (mode) { + case RGB_STATIC: + if (id == RGB_STATIC_WHITE) { + return YC059_STATIC_WHITE; + } + else { + return YC059_STATIC_RED + (id / 3) * 4 + id % 3; + } + break; + case RGB_ANIMATE: + return YC059_FLASH + id * 4; + break; + default: + return YC059_OFF; + break; + } +} diff --git a/keyboard/RedScarfIII/rgb.h b/keyboard/RedScarfIII/rgb.h new file mode 100644 index 00000000..f99a258f --- /dev/null +++ b/keyboard/RedScarfIII/rgb.h @@ -0,0 +1,79 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef RGB_H +#define RGB_H + +#include +#include + +enum rgb_mode_id { + RGB_STATIC, + RGB_ANIMATE +}; + +enum rgb_static_id { + RGB_STATIC_RED, + RGB_STATIC_GREEN, + RGB_STATIC_BLUE, + RGB_STATIC_RED_1, + RGB_STATIC_GREEN_1, + RGB_STATIC_BLUE_1, + RGB_STATIC_RED_2, + RGB_STATIC_GREEN_2, + RGB_STATIC_BLUE_2, + RGB_STATIC_RED_3, + RGB_STATIC_GREEN_3, + RGB_STATIC_BLUE_3, + RGB_STATIC_RED_4, + RGB_STATIC_GREEN_4, + RGB_STATIC_BLUE_4, + RGB_STATIC_WHITE +}; + +enum rgb_animate_id { + RGB_ANIMATE_FLASH, + RGB_ANIMATE_STROBE, + RGB_ANIMATE_FADE, + RGB_ANIMATE_SMOOTH +}; + +typedef union { + uint8_t raw; + struct { + uint8_t id :4; + uint8_t mode :3; + bool enable :1; + }; +} rgb_config_t; + +#define EECONFIG_RGB (uint8_t *)7 +#define RGB_UNCONFIGURED 0xFF + +void rgb_init(void); +void rgb_resume(void); +void rgb_read_config(void); +void rgb_write_config(void); +void rgb_on(void); +void rgb_off(void); +void rgb_toggle(void); +void rgb_increase(void); +void rgb_decrease(void); +void rgb_set(uint8_t mode, uint8_t id); +uint8_t rgb_to_yc059(uint8_t mode, uint8_t id); + +#endif diff --git a/keyboard/RedScarfIII/yc059.c b/keyboard/RedScarfIII/yc059.c new file mode 100644 index 00000000..90615dc7 --- /dev/null +++ b/keyboard/RedScarfIII/yc059.c @@ -0,0 +1,93 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include "yc059.h" +#include "debug.h" + +inline +void yc059_ir_high(void) +{ + YC059_IR_PORT &= ~(1<>= 1; + } +} + +void yc059_send_word(uint16_t word) +{ + yc059_send_byte((word & 0xFF00) >> 8); + yc059_send_byte(word & 0xFF); +} diff --git a/keyboard/RedScarfIII/yc059.h b/keyboard/RedScarfIII/yc059.h new file mode 100644 index 00000000..4ade9a66 --- /dev/null +++ b/keyboard/RedScarfIII/yc059.h @@ -0,0 +1,72 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef YC059_H +#define YC059_H + +#include + +#define YC059_FREQ 38000 +#define YC059_ADDRESS 0x00EF + +#define YC059_HDR_MARK 9000 +#define YC059_HDR_SPACE 4500 +#define YC059_BIT_MARK 560 +#define YC059_ONE_SPACE 1600 +#define YC059_ZERO_SPACE 560 +#define YC059_RPT_SPACE 2250 + +#define YC059_IR_DDR DDRC +#define YC059_IR_PORT PORTC +#define YC059_IR_BIT PC6 + +enum yc059_id { + YC059_INCREASE = 0, + YC059_DECREASE, + YC059_OFF, + YC059_ON, + YC059_STATIC_RED, + YC059_STATIC_GREEN, + YC059_STATIC_BLUE, + YC059_STATIC_WHITE, + YC059_STATIC_RED_1, + YC059_STATIC_GREEN_1, + YC059_STATIC_BLUE_1, + YC059_FLASH, + YC059_STATIC_RED_2, + YC059_STATIC_GREEN_2, + YC059_STATIC_BLUE_2, + YC059_STROBE, + YC059_STATIC_RED_3, + YC059_STATIC_GREEN_3, + YC059_STATIC_BLUE_3, + YC059_FADE, + YC059_STATIC_RED_4, + YC059_STATIC_GREEN_4, + YC059_STATIC_BLUE_4, + YC059_SMOOTH +}; + +void yc059_init(void); +void yc059_send(uint8_t data); +void yc059_send_header(void); +void yc059_send_address(void); +void yc059_send_byte(uint8_t byte); +void yc059_send_word(uint16_t word); +void yc059_send_stop(void); + +#endif