diff --git a/keyboard/staryu/Makefile b/keyboard/staryu/Makefile new file mode 100644 index 00000000..cf90f7b9 --- /dev/null +++ b/keyboard/staryu/Makefile @@ -0,0 +1,155 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = staryu_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c \ + ledmap.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_default.c $(SRC) +endif + + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover +#USB_6KRO_ENABLE = yes # USB 6key Rollover +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_USART= yes +#PS2_USE_BUSYWAIT = yes +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom +#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight +FADING_LED_ENABLE = yes # Enable fading backlight +BREATHING_LED_ENABLE = yes # Enable breathing backlight +LEDMAP_ENABLE = yes # Enable LED mapping +LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/staryu/Makefile.pjrc b/keyboard/staryu/Makefile.pjrc new file mode 100644 index 00000000..bb5433be --- /dev/null +++ b/keyboard/staryu/Makefile.pjrc @@ -0,0 +1,120 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = staryu_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c \ + ledmap.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_default.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u2 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Additional definitions from command line +ifdef DEFS + OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) +endif + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover +#USB_6KRO_ENABLE = yes # USB 6key Rollover +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_BUSYWAIT = yes +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom +#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor +SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight +FADING_LED_ENABLE = yes # Enable fading backlight +BREATHING_LED_ENABLE = yes # Enable breathing backlight +LEDMAP_ENABLE = yes # Enable LED mapping +LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/staryu/backlight.c b/keyboard/staryu/backlight.c new file mode 100644 index 00000000..d1f3e71e --- /dev/null +++ b/keyboard/staryu/backlight.c @@ -0,0 +1,128 @@ +/* +Copyright 2014 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include +#include "backlight.h" +#include "softpwm_led.h" +#include "keymap_common.h" + +#ifdef BACKLIGHT_ENABLE + +static const uint8_t backlight_table[] PROGMEM = { + 0, 16, 128, 255 +}; + +static uint8_t backlight_mode; + +void backlight_set(uint8_t level) +{ + backlight_mode = level; + switch (level) { + case 1: + case 2: + case 3: + softpwm_led_enable(); + fading_led_disable_all(); + breathing_led_disable_all(); + softpwm_led_set_all(pgm_read_byte(&backlight_table[level])); + break; + case 4: + case 5: + case 6: + softpwm_led_enable(); + breathing_led_enable_all(); + fading_led_disable_all(); + breathing_led_set_duration(6 - level); + break; + case 7: + softpwm_led_enable(); + fading_led_enable_all(); + breathing_led_disable_all(); + fading_led_set_direction(FADING_LED_FADE_IN); + fading_led_set_duration(3); + break; + case 8: + softpwm_led_enable(); + fading_led_enable_all(); + breathing_led_disable_all(); + fading_led_set_direction(FADING_LED_FADE_OUT); + fading_led_set_duration(3); + break; + case 0: + default: + fading_led_disable_all(); + breathing_led_disable_all(); + softpwm_led_enable(); + break; + } +} + + +#ifndef LEDMAP_ENABLE +void softpwm_led_init(void) +{ + DDRC |= (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8133 +#define PRODUCT_ID 0x0120 +#define DEVICE_VER 0x0103 +#define MANUFACTURER Noukensha +#define PRODUCT Staryu +#define DESCRIPTION t.m.k. keyboard firmware for Staryu + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 5 + +/* keymap in eeprom */ +#define FN_ACTIONS_COUNT 32 +#define KEYMAPS_COUNT 32 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 8 + +/* number of LEDs */ +#define LED_COUNT 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/staryu/keymap_common.c b/keyboard/staryu/keymap_common.c new file mode 100644 index 00000000..77c70b67 --- /dev/null +++ b/keyboard/staryu/keymap_common.c @@ -0,0 +1,54 @@ +/* +Copyright 2015 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "keymap.h" +#include "keymap_in_eeprom.h" +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ +#ifndef KEYMAP_IN_EEPROM_ENABLE + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +#else + return eeconfig_read_keymap_key(layer, key.row, key.col); +#endif +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t) { +#ifndef KEYMAP_IN_EEPROM_ENABLE + .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) +#else + .code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) +#endif + }; +} + +#ifdef KEYMAP_IN_EEPROM_ENABLE +const uint8_t* keymaps_pointer(void) { + return (const uint8_t*)keymaps; +} + +const uint16_t* fn_actions_pointer(void) { + return fn_actions; +} +#endif diff --git a/keyboard/staryu/keymap_common.h b/keyboard/staryu/keymap_common.h new file mode 100644 index 00000000..1a7e8471 --- /dev/null +++ b/keyboard/staryu/keymap_common.h @@ -0,0 +1,35 @@ +/* +Copyright 2015 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + +/* Staryu keymap definition macro + */ +#define KEYMAP( \ + SW1, SW2, \ + SW5, SW4, SW3 \ +) { \ + { KC_##SW1, KC_##SW2, KC_##SW3, KC_##SW4, KC_##SW5 } \ +} + +#endif diff --git a/keyboard/staryu/led.c b/keyboard/staryu/led.c new file mode 100644 index 00000000..e45cc543 --- /dev/null +++ b/keyboard/staryu/led.c @@ -0,0 +1,29 @@ +/* +Copyright 2015 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "bootloader.h" +#include "timer.h" +#include "led.h" + + +#ifndef LEDMAP_ENABLE +void led_set(uint8_t usb_led) +{ +} +#endif diff --git a/keyboard/staryu/ledmap.c b/keyboard/staryu/ledmap.c new file mode 100644 index 00000000..12087174 --- /dev/null +++ b/keyboard/staryu/ledmap.c @@ -0,0 +1,87 @@ +/* +Copyright 2015 Kai Ryu + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "ledmap.h" + + +#ifdef LEDMAP_ENABLE + +static const uint16_t ledmaps[LED_COUNT] PROGMEM = { + [0] = LEDMAP_BACKLIGHT, + [1] = LEDMAP_BACKLIGHT, + [2] = LEDMAP_BACKLIGHT, + [3] = LEDMAP_BACKLIGHT, + [4] = LEDMAP_BACKLIGHT +}; + +ledmap_t ledmap_get_code(uint8_t index) +{ + return (ledmap_t) { .code = pgm_read_word(&ledmaps[index]) }; +} + +void ledmap_led_init(void) +{ + DDRC |= (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "timer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "keymap_common.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix = 0; +static matrix_row_t matrix_debouncing = 0; + +static matrix_row_t read_cols(void); +static void init_cols(void); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize cols + init_cols(); +} + +uint8_t matrix_scan(void) +{ + matrix_row_t cols = read_cols(); + if (matrix_debouncing != cols) { + matrix_debouncing = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + matrix = matrix_debouncing; + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix & ((matrix_row_t)1<