#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = staryu_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# project specific files | |||||
SRC = keymap_common.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
backlight.c \ | |||||
ledmap.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_default.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u2 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Additional definitions from command line | |||||
ifdef DEFS | |||||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||||
endif | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#USB_6KRO_ENABLE = yes # USB 6key Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
#PS2_USE_USART= yes | |||||
#PS2_USE_BUSYWAIT = yes | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom | |||||
#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||||
SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight | |||||
FADING_LED_ENABLE = yes # Enable fading backlight | |||||
BREATHING_LED_ENABLE = yes # Enable breathing backlight | |||||
LEDMAP_ENABLE = yes # Enable LED mapping | |||||
LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom | |||||
# Optimize size but this may cause error "relocation truncated to fit" | |||||
#EXTRALDFLAGS = -Wl,--relax | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = staryu_pjrc | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# project specific files | |||||
SRC = keymap_common.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
backlight.c \ | |||||
ledmap.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_default.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
MCU = atmega32u2 | |||||
#MCU = at90usb1286 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Additional definitions from command line | |||||
ifdef DEFS | |||||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||||
endif | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#USB_6KRO_ENABLE = yes # USB 6key Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
#PS2_USE_BUSYWAIT = yes | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom | |||||
#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||||
SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight | |||||
FADING_LED_ENABLE = yes # Enable fading backlight | |||||
BREATHING_LED_ENABLE = yes # Enable breathing backlight | |||||
LEDMAP_ENABLE = yes # Enable LED mapping | |||||
LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
/* | |||||
Copyright 2014 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include <avr/pgmspace.h> | |||||
#include "backlight.h" | |||||
#include "softpwm_led.h" | |||||
#include "keymap_common.h" | |||||
#ifdef BACKLIGHT_ENABLE | |||||
static const uint8_t backlight_table[] PROGMEM = { | |||||
0, 16, 128, 255 | |||||
}; | |||||
static uint8_t backlight_mode; | |||||
void backlight_set(uint8_t level) | |||||
{ | |||||
backlight_mode = level; | |||||
switch (level) { | |||||
case 1: | |||||
case 2: | |||||
case 3: | |||||
softpwm_led_enable(); | |||||
fading_led_disable_all(); | |||||
breathing_led_disable_all(); | |||||
softpwm_led_set_all(pgm_read_byte(&backlight_table[level])); | |||||
break; | |||||
case 4: | |||||
case 5: | |||||
case 6: | |||||
softpwm_led_enable(); | |||||
breathing_led_enable_all(); | |||||
fading_led_disable_all(); | |||||
breathing_led_set_duration(6 - level); | |||||
break; | |||||
case 7: | |||||
softpwm_led_enable(); | |||||
fading_led_enable_all(); | |||||
breathing_led_disable_all(); | |||||
fading_led_set_direction(FADING_LED_FADE_IN); | |||||
fading_led_set_duration(3); | |||||
break; | |||||
case 8: | |||||
softpwm_led_enable(); | |||||
fading_led_enable_all(); | |||||
breathing_led_disable_all(); | |||||
fading_led_set_direction(FADING_LED_FADE_OUT); | |||||
fading_led_set_duration(3); | |||||
break; | |||||
case 0: | |||||
default: | |||||
fading_led_disable_all(); | |||||
breathing_led_disable_all(); | |||||
softpwm_led_enable(); | |||||
break; | |||||
} | |||||
} | |||||
#ifndef LEDMAP_ENABLE | |||||
void softpwm_led_init(void) | |||||
{ | |||||
DDRC |= (1<<PC2 | 1<<PC7); | |||||
DDRD |= (1<<PD5 | 1<<PD6); | |||||
DDRB |= (1<<PB0); | |||||
} | |||||
void softpwm_led_on(uint8_t index) | |||||
{ | |||||
switch (index) { | |||||
case 0: | |||||
PORTC |= (1<<PC2); | |||||
break; | |||||
case 1: | |||||
PORTC |= (1<<PC7); | |||||
break; | |||||
case 2: | |||||
PORTD |= (1<<PD5); | |||||
break; | |||||
case 3: | |||||
PORTD |= (1<<PD6); | |||||
break; | |||||
case 4: | |||||
PORTB |= (1<<PB0); | |||||
break; | |||||
} | |||||
} | |||||
void softpwm_led_off(uint8_t index) | |||||
{ | |||||
switch (index) { | |||||
case 0: | |||||
PORTC &= ~(1<<PC2); | |||||
break; | |||||
case 1: | |||||
PORTC &= ~(1<<PC7); | |||||
break; | |||||
case 2: | |||||
PORTD &= ~(1<<PD5); | |||||
break; | |||||
case 3: | |||||
PORTD &= ~(1<<PD6); | |||||
break; | |||||
case 4: | |||||
PORTB &= ~(1<<PB0); | |||||
break; | |||||
} | |||||
} | |||||
#endif | |||||
#endif |
/* | |||||
Copyright 2015 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x8133 | |||||
#define PRODUCT_ID 0x0120 | |||||
#define DEVICE_VER 0x0103 | |||||
#define MANUFACTURER Noukensha | |||||
#define PRODUCT Staryu | |||||
#define DESCRIPTION t.m.k. keyboard firmware for Staryu | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 1 | |||||
#define MATRIX_COLS 5 | |||||
/* keymap in eeprom */ | |||||
#define FN_ACTIONS_COUNT 32 | |||||
#define KEYMAPS_COUNT 32 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* number of backlight levels */ | |||||
#define BACKLIGHT_LEVELS 8 | |||||
/* number of LEDs */ | |||||
#define LED_COUNT 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
/* | |||||
Copyright 2015 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/pgmspace.h> | |||||
#include "keymap.h" | |||||
#include "keymap_in_eeprom.h" | |||||
#include "keymap_common.h" | |||||
/* translates key to keycode */ | |||||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) | |||||
{ | |||||
#ifndef KEYMAP_IN_EEPROM_ENABLE | |||||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||||
#else | |||||
return eeconfig_read_keymap_key(layer, key.row, key.col); | |||||
#endif | |||||
} | |||||
/* translates Fn keycode to action */ | |||||
action_t keymap_fn_to_action(uint8_t keycode) | |||||
{ | |||||
return (action_t) { | |||||
#ifndef KEYMAP_IN_EEPROM_ENABLE | |||||
.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) | |||||
#else | |||||
.code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) | |||||
#endif | |||||
}; | |||||
} | |||||
#ifdef KEYMAP_IN_EEPROM_ENABLE | |||||
const uint8_t* keymaps_pointer(void) { | |||||
return (const uint8_t*)keymaps; | |||||
} | |||||
const uint16_t* fn_actions_pointer(void) { | |||||
return fn_actions; | |||||
} | |||||
#endif |
/* | |||||
Copyright 2015 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef KEYMAP_COMMON_H | |||||
#define KEYMAP_COMMON_H | |||||
#include <stdint.h> | |||||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; | |||||
extern const uint16_t fn_actions[]; | |||||
/* Staryu keymap definition macro | |||||
*/ | |||||
#define KEYMAP( \ | |||||
SW1, SW2, \ | |||||
SW5, SW4, SW3 \ | |||||
) { \ | |||||
{ KC_##SW1, KC_##SW2, KC_##SW3, KC_##SW4, KC_##SW5 } \ | |||||
} | |||||
#endif |
/* | |||||
Copyright 2015 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include "stdint.h" | |||||
#include "bootloader.h" | |||||
#include "timer.h" | |||||
#include "led.h" | |||||
#ifndef LEDMAP_ENABLE | |||||
void led_set(uint8_t usb_led) | |||||
{ | |||||
} | |||||
#endif |
/* | |||||
Copyright 2015 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/pgmspace.h> | |||||
#include "ledmap.h" | |||||
#ifdef LEDMAP_ENABLE | |||||
static const uint16_t ledmaps[LED_COUNT] PROGMEM = { | |||||
[0] = LEDMAP_BACKLIGHT, | |||||
[1] = LEDMAP_BACKLIGHT, | |||||
[2] = LEDMAP_BACKLIGHT, | |||||
[3] = LEDMAP_BACKLIGHT, | |||||
[4] = LEDMAP_BACKLIGHT | |||||
}; | |||||
ledmap_t ledmap_get_code(uint8_t index) | |||||
{ | |||||
return (ledmap_t) { .code = pgm_read_word(&ledmaps[index]) }; | |||||
} | |||||
void ledmap_led_init(void) | |||||
{ | |||||
DDRC |= (1<<PC2 | 1<<PC7); | |||||
DDRD |= (1<<PD5 | 1<<PD6); | |||||
DDRB |= (1<<PB0); | |||||
} | |||||
void ledmap_led_on(uint8_t index) | |||||
{ | |||||
switch (index) { | |||||
case 0: | |||||
PORTC |= (1<<PC2); | |||||
break; | |||||
case 1: | |||||
PORTC |= (1<<PC7); | |||||
break; | |||||
case 2: | |||||
PORTD |= (1<<PD5); | |||||
break; | |||||
case 3: | |||||
PORTD |= (1<<PD6); | |||||
break; | |||||
case 4: | |||||
PORTB |= (1<<PB0); | |||||
break; | |||||
} | |||||
} | |||||
void ledmap_led_off(uint8_t index) | |||||
{ | |||||
switch (index) { | |||||
case 0: | |||||
PORTC &= ~(1<<PC2); | |||||
break; | |||||
case 1: | |||||
PORTC &= ~(1<<PC7); | |||||
break; | |||||
case 2: | |||||
PORTD &= ~(1<<PD5); | |||||
break; | |||||
case 3: | |||||
PORTD &= ~(1<<PD6); | |||||
break; | |||||
case 4: | |||||
PORTB &= ~(1<<PB0); | |||||
break; | |||||
} | |||||
} | |||||
#endif | |||||
/* | |||||
Copyright 2015 Kai Ryu <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include <util/delay.h> | |||||
#include "timer.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "matrix.h" | |||||
#include "keymap_common.h" | |||||
#ifndef DEBOUNCE | |||||
# define DEBOUNCE 5 | |||||
#endif | |||||
static uint8_t debouncing = DEBOUNCE; | |||||
/* matrix state(1:on, 0:off) */ | |||||
static matrix_row_t matrix = 0; | |||||
static matrix_row_t matrix_debouncing = 0; | |||||
static matrix_row_t read_cols(void); | |||||
static void init_cols(void); | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
// initialize cols | |||||
init_cols(); | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
matrix_row_t cols = read_cols(); | |||||
if (matrix_debouncing != cols) { | |||||
matrix_debouncing = cols; | |||||
if (debouncing) { | |||||
debug("bounce!: "); debug_hex(debouncing); debug("\n"); | |||||
} | |||||
debouncing = DEBOUNCE; | |||||
} | |||||
if (debouncing) { | |||||
if (--debouncing) { | |||||
_delay_ms(1); | |||||
} else { | |||||
matrix = matrix_debouncing; | |||||
} | |||||
} | |||||
return 1; | |||||
} | |||||
bool matrix_is_modified(void) | |||||
{ | |||||
if (debouncing) return false; | |||||
return true; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix & ((matrix_row_t)1<<col)); | |||||
} | |||||
inline | |||||
matrix_row_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 0123456789ABCDEF\n"); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
phex(row); print(": "); | |||||
pbin_reverse16(matrix_get_row(row)); | |||||
print("\n"); | |||||
} | |||||
} | |||||
uint8_t matrix_key_count(void) | |||||
{ | |||||
return bitpop16(matrix); | |||||
} | |||||
/* Column pin configuration | |||||
* col: 0 1 2 3 4 | |||||
* pin: D0 D1 D2 D3 D4 | |||||
*/ | |||||
static void init_cols(void) | |||||
{ | |||||
// Input with pull-up(DDR:0, PORT:1) | |||||
DDRD &= ~(1<<PD0 | 1<<PD1 | 1<<PD2 | 1<<PD3 | 1<<PD4); | |||||
PORTD |= (1<<PD0 | 1<<PD1 | 1<<PD2 | 1<<PD3 | 1<<PD4); | |||||
} | |||||
/* Column pin configuration | |||||
* col: 0 1 2 3 4 | |||||
* pin: D0 D1 D2 D3 D4 | |||||
*/ | |||||
static matrix_row_t read_cols(void) | |||||
{ | |||||
return (~PIND) & 0b00011111; | |||||
} |