1
0

kimera: New branch for kimera

This commit is contained in:
Kai Ryu 2014-05-26 11:20:17 +09:00
parent c164f21842
commit 83314aeb78
11 changed files with 1391 additions and 0 deletions

148
keyboard/kimera/Makefile Normal file
View File

@ -0,0 +1,148 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = kimera_lufa
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# project specific files
SRC = keymap_common.c \
matrix.c \
led.c \
backlight.c \
kimera.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_default.c $(SRC)
endif
CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Additional definitions from command line
ifdef DEFS
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF))
endif
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
#PS2_USE_BUSYWAIT = yes
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
KEYMAP_EX_ENABLE = yes # External keymap in eeprom
KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor
BREATHING_LED_ENABLE = yes # Enable breathing backlight
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

View File

@ -0,0 +1,116 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = kimera_pjrc
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# project specific files
SRC = keymap_common.c \
matrix.c \
led.c \
backlight.c \
kimera.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_poker.c $(SRC)
endif
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
MCU = atmega32u4
#MCU = at90usb1286
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Additional definitions from command line
ifdef DEFS
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF))
endif
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
#PS2_USE_BUSYWAIT = yes
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
KEYMAP_EX_ENABLE = yes # External keymap in eeprom
KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor
BREATHING_LED_ENABLE = yes # Enable breathing backlight
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk

106
keyboard/kimera/backlight.c Normal file
View File

@ -0,0 +1,106 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include "backlight.h"
#include "breathing_led.h"
#include "kimera.h"
#ifdef BACKLIGHT_ENABLE
void backlight_enable(void);
void backlight_disable(void);
inline void backlight_set_raw(uint8_t raw);
static const uint8_t backlight_table[] PROGMEM = {
0, 16, 128, 255
};
/* Backlight pin configuration
* BL: PB5 (D9)
*/
void backlight_enable(void)
{
// Turn on PWM
BL_DDR |= (1<<BL_BIT);
cli();
TCCR1A |= ((1<<WGM10) | (1<<COM1A1));
TCCR1B |= ((1<<CS11) | (1<<CS10));
sei();
}
void backlight_disable(void)
{
// Turn off PWM
BL_DDR &= ~(1<<BL_BIT);
cli();
TCCR1A &= ~((1<<WGM10) | (1<<COM1A1));
TCCR1B &= ~((1<<CS11) | (1<<CS10));
sei();
BL_OCR = 0;
}
void backlight_set(uint8_t level)
{
#ifdef BREATHING_LED_ENABLE
switch (level) {
case 1:
case 2:
case 3:
backlight_enable();
breathing_led_disable();
backlight_set_raw(pgm_read_byte(&backlight_table[level]));
break;
case 4:
case 5:
case 6:
backlight_enable();
breathing_led_enable();
breathing_led_set_duration(6 - level);
break;
case 0:
default:
breathing_led_disable();
backlight_disable();
break;
}
#else
if (level > 0) {
backlight_enable();
backlight_set_raw(pgm_read_byte(&backlight_table[level]));
}
else {
backlight_disable();
}
#endif
}
#ifdef BREATHING_LED_ENABLE
void breathing_led_set_raw(uint8_t raw)
{
backlight_set_raw(raw);
}
#endif
inline void backlight_set_raw(uint8_t raw)
{
OCR1A = raw;
}
#endif

80
keyboard/kimera/config.h Normal file
View File

@ -0,0 +1,80 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0x16c0
#define PRODUCT_ID 0x27db
#define DEVICE_VER 0x0001
#define MANUFACTURER kai1103@gmail.com
#define PRODUCT Kimera
#define DESCRIPTION t.m.k. keyboard firmware for Kimera
/* key matrix size */
#define MATRIX_ROWS 24
#define MATRIX_COLS 24
/* keymap in eeprom */
#define FN_ACTIONS_COUNT 32
#define KEYMAPS_COUNT 3
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* number of backlight levels */
#ifdef BREATHING_LED_ENABLE
#define BACKLIGHT_LEVELS 6
#else
#define BACKLIGHT_LEVELS 3
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View File

@ -0,0 +1,49 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "keymap_common.h"
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
{
#ifndef KEYMAP_EX_ENABLE
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
#else
return eeconfig_read_keymap_key(layer, key.row, key.col);
#endif
}
/* translates Fn keycode to action */
action_t keymap_fn_to_action(uint8_t keycode)
{
return (action_t) {
#ifndef KEYMAP_EX_ENABLE
.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)])
#else
.code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode))
#endif
};
}
#ifdef KEYMAP_EX_ENABLE
const uint8_t* keymaps_pointer(void) {
return (const uint8_t*)keymaps;
}
const uint16_t* fn_actions_pointer(void) {
return fn_actions;
}
#endif

View File

@ -0,0 +1,253 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
#include "keycode.h"
#include "action.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
#include "print.h"
#include "debug.h"
#include "keymap.h"
#include "keymap_ex.h"
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
/* Full keymap definition macro */
#define KEYMAP( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, KAJ, KAK, KAL, KAM, KAN, KAP, KAQ, KAR, KAS, KAT, KAU, KAV, KAW, KAX, KAY, KAZ, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, KBJ, KBK, KBL, KBM, KBN, KBP, KBQ, KBR, KBS, KBT, KBU, KBV, KBW, KBX, KBY, KBZ, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, KCJ, KCK, KCL, KCM, KCN, KCP, KCQ, KCR, KCS, KCT, KCU, KCV, KCW, KCX, KCY, KCZ, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, KDJ, KDK, KDL, KDM, KDN, KDP, KDQ, KDR, KDS, KDT, KDU, KDV, KDW, KDX, KDY, KDZ, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, KEJ, KEK, KEL, KEM, KEN, KEP, KEQ, KER, KES, KET, KEU, KEV, KEW, KEX, KEY, KEZ, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, KFJ, KFK, KFL, KFM, KFN, KFP, KFQ, KFR, KFS, KFT, KFU, KFV, KFW, KFX, KFY, KFZ, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, KGJ, KGK, KGL, KGM, KGN, KGP, KGQ, KGR, KGS, KGT, KGU, KGV, KGW, KGX, KGY, KGZ, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, KHJ, KHK, KHL, KHM, KHN, KHP, KHQ, KHR, KHS, KHT, KHU, KHV, KHW, KHX, KHY, KHZ, \
KJA, KJB, KJC, KJD, KJE, KJF, KJG, KJH, KJJ, KJK, KJL, KJM, KJN, KJP, KJQ, KJR, KJS, KJT, KJU, KJV, KJW, KJX, KJY, KJZ, \
KKA, KKB, KKC, KKD, KKE, KKF, KKG, KKH, KKJ, KKK, KKL, KKM, KKN, KKP, KKQ, KKR, KKS, KKT, KKU, KKV, KKW, KKX, KKY, KKZ, \
KLA, KLB, KLC, KLD, KLE, KLF, KLG, KLH, KLJ, KLK, KLL, KLM, KLN, KLP, KLQ, KLR, KLS, KLT, KLU, KLV, KLW, KLX, KLY, KLZ, \
KMA, KMB, KMC, KMD, KME, KMF, KMG, KMH, KMJ, KMK, KML, KMM, KMN, KMP, KMQ, KMR, KMS, KMT, KMU, KMV, KMW, KMX, KMY, KMZ, \
KNA, KNB, KNC, KND, KNE, KNF, KNG, KNH, KNJ, KNK, KNL, KNM, KNN, KNP, KNQ, KNR, KNS, KNT, KNU, KNV, KNW, KNX, KNY, KNZ, \
KPA, KPB, KPC, KPD, KPE, KPF, KPG, KPH, KPJ, KPK, KPL, KPM, KPN, KPP, KPQ, KPR, KPS, KPT, KPU, KPV, KPW, KPX, KPY, KPZ, \
KQA, KQB, KQC, KQD, KQE, KQF, KQG, KQH, KQJ, KQK, KQL, KQM, KQN, KQP, KQQ, KQR, KQS, KQT, KQU, KQV, KQW, KQX, KQY, KQZ, \
KRA, KRB, KRC, KRD, KRE, KRF, KRG, KRH, KRJ, KRK, KRL, KRM, KRN, KRP, KRQ, KRR, KRS, KRT, KRU, KRV, KRW, KRX, KRY, KRZ, \
KSA, KSB, KSC, KSD, KSE, KSF, KSG, KSH, KSJ, KSK, KSL, KSM, KSN, KSP, KSQ, KSR, KSS, KST, KSU, KSV, KSW, KSX, KSY, KSZ, \
KTA, KTB, KTC, KTD, KTE, KTF, KTG, KTH, KTJ, KTK, KTL, KTM, KTN, KTP, KTQ, KTR, KTS, KTT, KTU, KTV, KTW, KTX, KTY, KTZ, \
KUA, KUB, KUC, KUD, KUE, KUF, KUG, KUH, KUJ, KUK, KUL, KUM, KUN, KUP, KUQ, KUR, KUS, KUT, KUU, KUV, KUW, KUX, KUY, KUZ, \
KVA, KVB, KVC, KVD, KVE, KVF, KVG, KVH, KVJ, KVK, KVL, KVM, KVN, KVP, KVQ, KVR, KVS, KVT, KVU, KVV, KVW, KVX, KVY, KVZ, \
KWA, KWB, KWC, KWD, KWE, KWF, KWG, KWH, KWJ, KWK, KWL, KWM, KWN, KWP, KWQ, KWR, KWS, KWT, KWU, KWV, KWW, KWX, KWY, KWZ, \
KXA, KXB, KXC, KXD, KXE, KXF, KXG, KXH, KXJ, KXK, KXL, KXM, KXN, KXP, KXQ, KXR, KXS, KXT, KXU, KXV, KXW, KXX, KXY, KXZ, \
KYA, KYB, KYC, KYD, KYE, KYF, KYG, KYH, KYJ, KYK, KYL, KYM, KYN, KYP, KYQ, KYR, KYS, KYT, KYU, KYV, KYW, KYX, KYY, KYZ, \
KZA, KZB, KZC, KZD, KZE, KZF, KZG, KZH, KZJ, KZK, KZL, KZM, KZN, KZP, KZQ, KZR, KZS, KZT, KZU, KZV, KZW, KZX, KZY, KZZ \
) { \
{ KC_##KAA, KC_##KAB, KC_##KAC, KC_##KAD, KC_##KAE, KC_##KAF, KC_##KAG, KC_##KAH, KC_##KAJ, KC_##KAK, KC_##KAL, KC_##KAM, KC_##KAN, KC_##KAP, KC_##KAQ, KC_##KAR, KC_##KAS, KC_##KAT, KC_##KAU, KC_##KAV, KC_##KAW, KC_##KAX, KC_##KAY, KC_##KAZ }, \
{ KC_##KBA, KC_##KBB, KC_##KBC, KC_##KBD, KC_##KBE, KC_##KBF, KC_##KBG, KC_##KBH, KC_##KBJ, KC_##KBK, KC_##KBL, KC_##KBM, KC_##KBN, KC_##KBP, KC_##KBQ, KC_##KBR, KC_##KBS, KC_##KBT, KC_##KBU, KC_##KBV, KC_##KBW, KC_##KBX, KC_##KBY, KC_##KBZ }, \
{ KC_##KCA, KC_##KCB, KC_##KCC, KC_##KCD, KC_##KCE, KC_##KCF, KC_##KCG, KC_##KCH, KC_##KCJ, KC_##KCK, KC_##KCL, KC_##KCM, KC_##KCN, KC_##KCP, KC_##KCQ, KC_##KCR, KC_##KCS, KC_##KCT, KC_##KCU, KC_##KCV, KC_##KCW, KC_##KCX, KC_##KCY, KC_##KCZ }, \
{ KC_##KDA, KC_##KDB, KC_##KDC, KC_##KDD, KC_##KDE, KC_##KDF, KC_##KDG, KC_##KDH, KC_##KDJ, KC_##KDK, KC_##KDL, KC_##KDM, KC_##KDN, KC_##KDP, KC_##KDQ, KC_##KDR, KC_##KDS, KC_##KDT, KC_##KDU, KC_##KDV, KC_##KDW, KC_##KDX, KC_##KDY, KC_##KDZ }, \
{ KC_##KEA, KC_##KEB, KC_##KEC, KC_##KED, KC_##KEE, KC_##KEF, KC_##KEG, KC_##KEH, KC_##KEJ, KC_##KEK, KC_##KEL, KC_##KEM, KC_##KEN, KC_##KEP, KC_##KEQ, KC_##KER, KC_##KES, KC_##KET, KC_##KEU, KC_##KEV, KC_##KEW, KC_##KEX, KC_##KEY, KC_##KEZ }, \
{ KC_##KFA, KC_##KFB, KC_##KFC, KC_##KFD, KC_##KFE, KC_##KFF, KC_##KFG, KC_##KFH, KC_##KFJ, KC_##KFK, KC_##KFL, KC_##KFM, KC_##KFN, KC_##KFP, KC_##KFQ, KC_##KFR, KC_##KFS, KC_##KFT, KC_##KFU, KC_##KFV, KC_##KFW, KC_##KFX, KC_##KFY, KC_##KFZ }, \
{ KC_##KGA, KC_##KGB, KC_##KGC, KC_##KGD, KC_##KGE, KC_##KGF, KC_##KGG, KC_##KGH, KC_##KGJ, KC_##KGK, KC_##KGL, KC_##KGM, KC_##KGN, KC_##KGP, KC_##KGQ, KC_##KGR, KC_##KGS, KC_##KGT, KC_##KGU, KC_##KGV, KC_##KGW, KC_##KGX, KC_##KGY, KC_##KGZ }, \
{ KC_##KHA, KC_##KHB, KC_##KHC, KC_##KHD, KC_##KHE, KC_##KHF, KC_##KHG, KC_##KHH, KC_##KHJ, KC_##KHK, KC_##KHL, KC_##KHM, KC_##KHN, KC_##KHP, KC_##KHQ, KC_##KHR, KC_##KHS, KC_##KHT, KC_##KHU, KC_##KHV, KC_##KHW, KC_##KHX, KC_##KHY, KC_##KHZ }, \
{ KC_##KJA, KC_##KJB, KC_##KJC, KC_##KJD, KC_##KJE, KC_##KJF, KC_##KJG, KC_##KJH, KC_##KJJ, KC_##KJK, KC_##KJL, KC_##KJM, KC_##KJN, KC_##KJP, KC_##KJQ, KC_##KJR, KC_##KJS, KC_##KJT, KC_##KJU, KC_##KJV, KC_##KJW, KC_##KJX, KC_##KJY, KC_##KJZ }, \
{ KC_##KKA, KC_##KKB, KC_##KKC, KC_##KKD, KC_##KKE, KC_##KKF, KC_##KKG, KC_##KKH, KC_##KKJ, KC_##KKK, KC_##KKL, KC_##KKM, KC_##KKN, KC_##KKP, KC_##KKQ, KC_##KKR, KC_##KKS, KC_##KKT, KC_##KKU, KC_##KKV, KC_##KKW, KC_##KKX, KC_##KKY, KC_##KKZ }, \
{ KC_##KLA, KC_##KLB, KC_##KLC, KC_##KLD, KC_##KLE, KC_##KLF, KC_##KLG, KC_##KLH, KC_##KLJ, KC_##KLK, KC_##KLL, KC_##KLM, KC_##KLN, KC_##KLP, KC_##KLQ, KC_##KLR, KC_##KLS, KC_##KLT, KC_##KLU, KC_##KLV, KC_##KLW, KC_##KLX, KC_##KLY, KC_##KLZ }, \
{ KC_##KMA, KC_##KMB, KC_##KMC, KC_##KMD, KC_##KME, KC_##KMF, KC_##KMG, KC_##KMH, KC_##KMJ, KC_##KMK, KC_##KML, KC_##KMM, KC_##KMN, KC_##KMP, KC_##KMQ, KC_##KMR, KC_##KMS, KC_##KMT, KC_##KMU, KC_##KMV, KC_##KMW, KC_##KMX, KC_##KMY, KC_##KMZ }, \
{ KC_##KNA, KC_##KNB, KC_##KNC, KC_##KND, KC_##KNE, KC_##KNF, KC_##KNG, KC_##KNH, KC_##KNJ, KC_##KNK, KC_##KNL, KC_##KNM, KC_##KNN, KC_##KNP, KC_##KNQ, KC_##KNR, KC_##KNS, KC_##KNT, KC_##KNU, KC_##KNV, KC_##KNW, KC_##KNX, KC_##KNY, KC_##KNZ }, \
{ KC_##KPA, KC_##KPB, KC_##KPC, KC_##KPD, KC_##KPE, KC_##KPF, KC_##KPG, KC_##KPH, KC_##KPJ, KC_##KPK, KC_##KPL, KC_##KPM, KC_##KPN, KC_##KPP, KC_##KPQ, KC_##KPR, KC_##KPS, KC_##KPT, KC_##KPU, KC_##KPV, KC_##KPW, KC_##KPX, KC_##KPY, KC_##KPZ }, \
{ KC_##KQA, KC_##KQB, KC_##KQC, KC_##KQD, KC_##KQE, KC_##KQF, KC_##KQG, KC_##KQH, KC_##KQJ, KC_##KQK, KC_##KQL, KC_##KQM, KC_##KQN, KC_##KQP, KC_##KQQ, KC_##KQR, KC_##KQS, KC_##KQT, KC_##KQU, KC_##KQV, KC_##KQW, KC_##KQX, KC_##KQY, KC_##KQZ }, \
{ KC_##KRA, KC_##KRB, KC_##KRC, KC_##KRD, KC_##KRE, KC_##KRF, KC_##KRG, KC_##KRH, KC_##KRJ, KC_##KRK, KC_##KRL, KC_##KRM, KC_##KRN, KC_##KRP, KC_##KRQ, KC_##KRR, KC_##KRS, KC_##KRT, KC_##KRU, KC_##KRV, KC_##KRW, KC_##KRX, KC_##KRY, KC_##KRZ }, \
{ KC_##KSA, KC_##KSB, KC_##KSC, KC_##KSD, KC_##KSE, KC_##KSF, KC_##KSG, KC_##KSH, KC_##KSJ, KC_##KSK, KC_##KSL, KC_##KSM, KC_##KSN, KC_##KSP, KC_##KSQ, KC_##KSR, KC_##KSS, KC_##KST, KC_##KSU, KC_##KSV, KC_##KSW, KC_##KSX, KC_##KSY, KC_##KSZ }, \
{ KC_##KTA, KC_##KTB, KC_##KTC, KC_##KTD, KC_##KTE, KC_##KTF, KC_##KTG, KC_##KTH, KC_##KTJ, KC_##KTK, KC_##KTL, KC_##KTM, KC_##KTN, KC_##KTP, KC_##KTQ, KC_##KTR, KC_##KTS, KC_##KTT, KC_##KTU, KC_##KTV, KC_##KTW, KC_##KTX, KC_##KTY, KC_##KTZ }, \
{ KC_##KUA, KC_##KUB, KC_##KUC, KC_##KUD, KC_##KUE, KC_##KUF, KC_##KUG, KC_##KUH, KC_##KUJ, KC_##KUK, KC_##KUL, KC_##KUM, KC_##KUN, KC_##KUP, KC_##KUQ, KC_##KUR, KC_##KUS, KC_##KUT, KC_##KUU, KC_##KUV, KC_##KUW, KC_##KUX, KC_##KUY, KC_##KUZ }, \
{ KC_##KVA, KC_##KVB, KC_##KVC, KC_##KVD, KC_##KVE, KC_##KVF, KC_##KVG, KC_##KVH, KC_##KVJ, KC_##KVK, KC_##KVL, KC_##KVM, KC_##KVN, KC_##KVP, KC_##KVQ, KC_##KVR, KC_##KVS, KC_##KVT, KC_##KVU, KC_##KVV, KC_##KVW, KC_##KVX, KC_##KVY, KC_##KVZ }, \
{ KC_##KWA, KC_##KWB, KC_##KWC, KC_##KWD, KC_##KWE, KC_##KWF, KC_##KWG, KC_##KWH, KC_##KWJ, KC_##KWK, KC_##KWL, KC_##KWM, KC_##KWN, KC_##KWP, KC_##KWQ, KC_##KWR, KC_##KWS, KC_##KWT, KC_##KWU, KC_##KWV, KC_##KWW, KC_##KWX, KC_##KWY, KC_##KWZ }, \
{ KC_##KXA, KC_##KXB, KC_##KXC, KC_##KXD, KC_##KXE, KC_##KXF, KC_##KXG, KC_##KXH, KC_##KXJ, KC_##KXK, KC_##KXL, KC_##KXM, KC_##KXN, KC_##KXP, KC_##KXQ, KC_##KXR, KC_##KXS, KC_##KXT, KC_##KXU, KC_##KXV, KC_##KXW, KC_##KXX, KC_##KXY, KC_##KXZ }, \
{ KC_##KYA, KC_##KYB, KC_##KYC, KC_##KYD, KC_##KYE, KC_##KYF, KC_##KYG, KC_##KYH, KC_##KYJ, KC_##KYK, KC_##KYL, KC_##KYM, KC_##KYN, KC_##KYP, KC_##KYQ, KC_##KYR, KC_##KYS, KC_##KYT, KC_##KYU, KC_##KYV, KC_##KYW, KC_##KYX, KC_##KYY, KC_##KYZ }, \
{ KC_##KZA, KC_##KZB, KC_##KZC, KC_##KZD, KC_##KZE, KC_##KZF, KC_##KZG, KC_##KZH, KC_##KZJ, KC_##KZK, KC_##KZL, KC_##KZM, KC_##KZN, KC_##KZP, KC_##KZQ, KC_##KZR, KC_##KZS, KC_##KZT, KC_##KZU, KC_##KZV, KC_##KZW, KC_##KZX, KC_##KZY, KC_##KZZ }, \
}
/* 8 rows, 24 cols */
#define KEYMAP_8x24( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, KAJ, KAK, KAL, KAM, KAN, KAP, KAQ, KAR, KAS, KAT, KAU, KAV, KAW, KAX, KAY, KAZ, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, KBJ, KBK, KBL, KBM, KBN, KBP, KBQ, KBR, KBS, KBT, KBU, KBV, KBW, KBX, KBY, KBZ, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, KCJ, KCK, KCL, KCM, KCN, KCP, KCQ, KCR, KCS, KCT, KCU, KCV, KCW, KCX, KCY, KCZ, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, KDJ, KDK, KDL, KDM, KDN, KDP, KDQ, KDR, KDS, KDT, KDU, KDV, KDW, KDX, KDY, KDZ, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, KEJ, KEK, KEL, KEM, KEN, KEP, KEQ, KER, KES, KET, KEU, KEV, KEW, KEX, KEY, KEZ, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, KFJ, KFK, KFL, KFM, KFN, KFP, KFQ, KFR, KFS, KFT, KFU, KFV, KFW, KFX, KFY, KFZ, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, KGJ, KGK, KGL, KGM, KGN, KGP, KGQ, KGR, KGS, KGT, KGU, KGV, KGW, KGX, KGY, KGZ, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, KHJ, KHK, KHL, KHM, KHN, KHP, KHQ, KHR, KHS, KHT, KHU, KHV, KHW, KHX, KHY, KHZ \
) KEYMAP( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, KAJ, KAK, KAL, KAM, KAN, KAP, KAQ, KAR, KAS, KAT, KAU, KAV, KAW, KAX, KAY, KAZ, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, KBJ, KBK, KBL, KBM, KBN, KBP, KBQ, KBR, KBS, KBT, KBU, KBV, KBW, KBX, KBY, KBZ, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, KCJ, KCK, KCL, KCM, KCN, KCP, KCQ, KCR, KCS, KCT, KCU, KCV, KCW, KCX, KCY, KCZ, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, KDJ, KDK, KDL, KDM, KDN, KDP, KDQ, KDR, KDS, KDT, KDU, KDV, KDW, KDX, KDY, KDZ, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, KEJ, KEK, KEL, KEM, KEN, KEP, KEQ, KER, KES, KET, KEU, KEV, KEW, KEX, KEY, KEZ, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, KFJ, KFK, KFL, KFM, KFN, KFP, KFQ, KFR, KFS, KFT, KFU, KFV, KFW, KFX, KFY, KFZ, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, KGJ, KGK, KGL, KGM, KGN, KGP, KGQ, KGR, KGS, KGT, KGU, KGV, KGW, KGX, KGY, KGZ, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, KHJ, KHK, KHL, KHM, KHN, KHP, KHQ, KHR, KHS, KHT, KHU, KHV, KHW, KHX, KHY, KHZ, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO \
)
/* 16 rows, 16 cols */
#define KEYMAP_16x16( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, KAJ, KAK, KAL, KAM, KAN, KAP, KAQ, KAR, KAS, KAT, KAU, KAV, KAW, KAX, KAY, KAZ, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, KBJ, KBK, KBL, KBM, KBN, KBP, KBQ, KBR, KBS, KBT, KBU, KBV, KBW, KBX, KBY, KBZ, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, KCJ, KCK, KCL, KCM, KCN, KCP, KCQ, KCR, KCS, KCT, KCU, KCV, KCW, KCX, KCY, KCZ, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, KDJ, KDK, KDL, KDM, KDN, KDP, KDQ, KDR, KDS, KDT, KDU, KDV, KDW, KDX, KDY, KDZ, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, KEJ, KEK, KEL, KEM, KEN, KEP, KEQ, KER, KES, KET, KEU, KEV, KEW, KEX, KEY, KEZ, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, KFJ, KFK, KFL, KFM, KFN, KFP, KFQ, KFR, KFS, KFT, KFU, KFV, KFW, KFX, KFY, KFZ, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, KGJ, KGK, KGL, KGM, KGN, KGP, KGQ, KGR, KGS, KGT, KGU, KGV, KGW, KGX, KGY, KGZ, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, KHJ, KHK, KHL, KHM, KHN, KHP, KHQ, KHR, KHS, KHT, KHU, KHV, KHW, KHX, KHY, KHZ, \
KJA, KJB, KJC, KJD, KJE, KJF, KJG, KJH, KJJ, KJK, KJL, KJM, KJN, KJP, KJQ, KJR, KJS, KJT, KJU, KJV, KJW, KJX, KJY, KJZ, \
KKA, KKB, KKC, KKD, KKE, KKF, KKG, KKH, KKJ, KKK, KKL, KKM, KKN, KKP, KKQ, KKR, KKS, KKT, KKU, KKV, KKW, KKX, KKY, KKZ, \
KLA, KLB, KLC, KLD, KLE, KLF, KLG, KLH, KLJ, KLK, KLL, KLM, KLN, KLP, KLQ, KLR, KLS, KLT, KLU, KLV, KLW, KLX, KLY, KLZ, \
KMA, KMB, KMC, KMD, KME, KMF, KMG, KMH, KMJ, KMK, KML, KMM, KMN, KMP, KMQ, KMR, KMS, KMT, KMU, KMV, KMW, KMX, KMY, KMZ, \
KNA, KNB, KNC, KND, KNE, KNF, KNG, KNH, KNJ, KNK, KNL, KNM, KNN, KNP, KNQ, KNR, KNS, KNT, KNU, KNV, KNW, KNX, KNY, KNZ, \
KPA, KPB, KPC, KPD, KPE, KPF, KPG, KPH, KPJ, KPK, KPL, KPM, KPN, KPP, KPQ, KPR, KPS, KPT, KPU, KPV, KPW, KPX, KPY, KPZ, \
KQA, KQB, KQC, KQD, KQE, KQF, KQG, KQH, KQJ, KQK, KQL, KQM, KQN, KQP, KQQ, KQR, KQS, KQT, KQU, KQV, KQW, KQX, KQY, KQZ, \
KRA, KRB, KRC, KRD, KRE, KRF, KRG, KRH, KRJ, KRK, KRL, KRM, KRN, KRP, KRQ, KRR, KRS, KRT, KRU, KRV, KRW, KRX, KRY, KRZ, \
KSA, KSB, KSC, KSD, KSE, KSF, KSG, KSH, KSJ, KSK, KSL, KSM, KSN, KSP, KSQ, KSR, KSS, KST, KSU, KSV, KSW, KSX, KSY, KSZ, \
KTA, KTB, KTC, KTD, KTE, KTF, KTG, KTH, KTJ, KTK, KTL, KTM, KTN, KTP, KTQ, KTR, KTS, KTT, KTU, KTV, KTW, KTX, KTY, KTZ, \
KUA, KUB, KUC, KUD, KUE, KUF, KUG, KUH, KUJ, KUK, KUL, KUM, KUN, KUP, KUQ, KUR, KUS, KUT, KUU, KUV, KUW, KUX, KUY, KUZ, \
KVA, KVB, KVC, KVD, KVE, KVF, KVG, KVH, KVJ, KVK, KVL, KVM, KVN, KVP, KVQ, KVR, KVS, KVT, KVU, KVV, KVW, KVX, KVY, KVZ, \
KWA, KWB, KWC, KWD, KWE, KWF, KWG, KWH, KWJ, KWK, KWL, KWM, KWN, KWP, KWQ, KWR, KWS, KWT, KWU, KWV, KWW, KWX, KWY, KWZ, \
KXA, KXB, KXC, KXD, KXE, KXF, KXG, KXH, KXJ, KXK, KXL, KXM, KXN, KXP, KXQ, KXR, KXS, KXT, KXU, KXV, KXW, KXX, KXY, KXZ, \
KYA, KYB, KYC, KYD, KYE, KYF, KYG, KYH, KYJ, KYK, KYL, KYM, KYN, KYP, KYQ, KYR, KYS, KYT, KYU, KYV, KYW, KYX, KYY, KYZ, \
KZA, KZB, KZC, KZD, KZE, KZF, KZG, KZH, KZJ, KZK, KZL, KZM, KZN, KZP, KZQ, KZR, KZS, KZT, KZU, KZV, KZW, KZX, KZY, KZZ \
) KEYMAP( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, KAJ, KAK, KAL, KAM, KAN, KAP, KAQ, KAR, NO, NO, NO, NO, NO, NO, NO, NO, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, KBJ, KBK, KBL, KBM, KBN, KBP, KBQ, KBR, NO, NO, NO, NO, NO, NO, NO, NO, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, KCJ, KCK, KCL, KCM, KCN, KCP, KCQ, KCR, NO, NO, NO, NO, NO, NO, NO, NO, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, KDJ, KDK, KDL, KDM, KDN, KDP, KDQ, KDR, NO, NO, NO, NO, NO, NO, NO, NO, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, KEJ, KEK, KEL, KEM, KEN, KEP, KEQ, KER, NO, NO, NO, NO, NO, NO, NO, NO, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, KFJ, KFK, KFL, KFM, KFN, KFP, KFQ, KFR, NO, NO, NO, NO, NO, NO, NO, NO, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, KGJ, KGK, KGL, KGM, KGN, KGP, KGQ, KGR, NO, NO, NO, NO, NO, NO, NO, NO, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, KHJ, KHK, KHL, KHM, KHN, KHP, KHQ, KHR, NO, NO, NO, NO, NO, NO, NO, NO, \
KJA, KJB, KJC, KJD, KJE, KJF, KJG, KJH, KJJ, KJK, KJL, KJM, KJN, KJP, KJQ, KJR, NO, NO, NO, NO, NO, NO, NO, NO, \
KKA, KKB, KKC, KKD, KKE, KKF, KKG, KKH, KKJ, KKK, KKL, KKM, KKN, KKP, KKQ, KKR, NO, NO, NO, NO, NO, NO, NO, NO, \
KLA, KLB, KLC, KLD, KLE, KLF, KLG, KLH, KLJ, KLK, KLL, KLM, KLN, KLP, KLQ, KLR, NO, NO, NO, NO, NO, NO, NO, NO, \
KMA, KMB, KMC, KMD, KME, KMF, KMG, KMH, KMJ, KMK, KML, KMM, KMN, KMP, KMQ, KMR, NO, NO, NO, NO, NO, NO, NO, NO, \
KNA, KNB, KNC, KND, KNE, KNF, KNG, KNH, KNJ, KNK, KNL, KNM, KNN, KNP, KNQ, KNR, NO, NO, NO, NO, NO, NO, NO, NO, \
KPA, KPB, KPC, KPD, KPE, KPF, KPG, KPH, KPJ, KPK, KPL, KPM, KPN, KPP, KPQ, KPR, NO, NO, NO, NO, NO, NO, NO, NO, \
KQA, KQB, KQC, KQD, KQE, KQF, KQG, KQH, KQJ, KQK, KQL, KQM, KQN, KQP, KQQ, KQR, NO, NO, NO, NO, NO, NO, NO, NO, \
KRA, KRB, KRC, KRD, KRE, KRF, KRG, KRH, KRJ, KRK, KRL, KRM, KRN, KRP, KRQ, KRR, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO \
)
/* 24 rows, 8 cols */
#define KEYMAP_24x8( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, \
KJA, KJB, KJC, KJD, KJE, KJF, KJG, KJH, \
KKA, KKB, KKC, KKD, KKE, KKF, KKG, KKH, \
KLA, KLB, KLC, KLD, KLE, KLF, KLG, KLH, \
KMA, KMB, KMC, KMD, KME, KMF, KMG, KMH, \
KNA, KNB, KNC, KND, KNE, KNF, KNG, KNH, \
KPA, KPB, KPC, KPD, KPE, KPF, KPG, KPH, \
KQA, KQB, KQC, KQD, KQE, KQF, KQG, KQH, \
KRA, KRB, KRC, KRD, KRE, KRF, KRG, KRH, \
KSA, KSB, KSC, KSD, KSE, KSF, KSG, KSH, \
KTA, KTB, KTC, KTD, KTE, KTF, KTG, KTH, \
KUA, KUB, KUC, KUD, KUE, KUF, KUG, KUH, \
KVA, KVB, KVC, KVD, KVE, KVF, KVG, KVH, \
KWA, KWB, KWC, KWD, KWE, KWF, KWG, KWH, \
KXA, KXB, KXC, KXD, KXE, KXF, KXG, KXH, \
KYA, KYB, KYC, KYD, KYE, KYF, KYG, KYH, \
KZA, KZB, KZC, KZD, KZE, KZF, KZG, KZH \
) KEYMAP( \
KAA, KAB, KAC, KAD, KAE, KAF, KAG, KAH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KBA, KBB, KBC, KBD, KBE, KBF, KBG, KBH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KCA, KCB, KCC, KCD, KCE, KCF, KCG, KCH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KDA, KDB, KDC, KDD, KDE, KDF, KDG, KDH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KEA, KEB, KEC, KED, KEE, KEF, KEG, KEH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KFA, KFB, KFC, KFD, KFE, KFF, KFG, KFH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KGA, KGB, KGC, KGD, KGE, KGF, KGG, KGH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KHA, KHB, KHC, KHD, KHE, KHF, KHG, KHH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KJA, KJB, KJC, KJD, KJE, KJF, KJG, KJH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KKA, KKB, KKC, KKD, KKE, KKF, KKG, KKH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KLA, KLB, KLC, KLD, KLE, KLF, KLG, KLH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KMA, KMB, KMC, KMD, KME, KMF, KMG, KMH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KNA, KNB, KNC, KND, KNE, KNF, KNG, KNH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KPA, KPB, KPC, KPD, KPE, KPF, KPG, KPH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KQA, KQB, KQC, KQD, KQE, KQF, KQG, KQH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KRA, KRB, KRC, KRD, KRE, KRF, KRG, KRH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KSA, KSB, KSC, KSD, KSE, KSF, KSG, KSH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KTA, KTB, KTC, KTD, KTE, KTF, KTG, KTH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KUA, KUB, KUC, KUD, KUE, KUF, KUG, KUH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KVA, KVB, KVC, KVD, KVE, KVF, KVG, KVH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KWA, KWB, KWC, KWD, KWE, KWF, KWG, KWH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KXA, KXB, KXC, KXD, KXE, KXF, KXG, KXH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KYA, KYB, KYC, KYD, KYE, KYF, KYG, KYH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
KZA, KZB, KZC, KZD, KZE, KZF, KZG, KZH, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO \
)
/* ANSI 104 keymap */
#define KEYMAP_ANSI_104( \
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PRS, SCL, PAU, \
GRV, _1, _2, _3, _4, _5, _6, _7, _8, _9, _0, MNS, EQU, BSP, INS, HOM, PGU, NUM, PSL, PAS, PMN, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBR, RBR, BSL, DEL, END, PGD, P7, P8, P9, PPL, \
CAP, A, S, D, F, G, H, J, K, L, SCN, QUT, ENT, P4, P5, P6, \
LSF, Z, X, C, V, B, N, M, COM, DOT, SLS, RSF, UP, P1, P2, P3, PEN, \
LCT, LGU, LAL, SPC, RAL, RGU, APP, RCT, LFT, DOW, RGT, P0, PDT \
) KEYMAP_8x24( \
ESC, NO, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PRS, SCL, PAU, NO, NO, NO, NO, NO, NO, NO, \
GRV, _1, _2, _3, _4, _5, _6, _7, _8, _9, _0, MNS, EQU, BSP, INS, HOM, PGU, NUM, PSL, PAS, PMN, NO, NO, NO, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBR, RBR, BSL, DEL, END, PGD, P7, P8, P9, PPL, NO, NO, NO, \
CAP, A, S, D, F, G, H, J, K, L, SCN, QUT, NO, ENT, NO, NO, NO, P4, P5, P6, NO, NO, NO, NO, \
LSF, Z, X, C, V, B, N, M, COM, DOT, SLS, NO, NO, RSF, NO, UP, NO, P1, P2, P3, PEN, NO, NO, NO, \
LCT, LGU, LAL, NO, NO, NO, SPC, NO, NO, NO, RAL, RGU, APP, RCT, LFT, DOW, RGT, P0, NO, PDT, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO \
)
#endif

View File

@ -0,0 +1,78 @@
#include "keymap_common.h"
// Default
#ifdef KEYMAP_SECTION_ENABLE
const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
#else
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
#endif
/* Keymap 0: Default Layer
* ,---------------------------------------------------------------------------------------.
* |Esc| | F1| F2| F3| F4| | F5| F6| F7| F8| | F9|F10|F11|F12|Psc|Slk|Pus| |
* |---------------------------------------------------------------------------------------|
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Ins|Hom|PgU|Num| /| *| -|
* |---------------------------------------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|Del|End|PgD| 7| 8| 9| |
* |-----------------------------------------------------------------------------------| +|
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
* |-----------------------------------------------------------| ,---. |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------------------------------|Ent|
* |Ctrl|Gui |Alt | Space |Alt |Gui |Fn0 |Ctrl|Lef|Dow|Rig| 0| .| |
* `---------------------------------------------------------------------------------------'
*/
KEYMAP_ANSI_104(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, \
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, \
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, \
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, PENT, \
LCTL,LGUI,LALT, SPC, RALT,RGUI,FN0, RCTL, LEFT,DOWN,RGHT, P0, PDOT ),
/* Keymap 1: Fn Layer
* ,---------------------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | | | | | |
* |---------------------------------------------------------------------------------------|
* | | | | | | | | | | | | | | | | | | | | | |
* |---------------------------------------------------------------------------------------|
* | |Fn1|Fn2|Fn3| | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------------------------------| |
* | | | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------| ,---. |----------------
* | | | | | | | | | | | | | | | | | | | |
* |-----------------------------------------------------------------------------------| |
* | | | | | | | | | | | | | | | |
* `---------------------------------------------------------------------------------------'
*/
KEYMAP_ANSI_104(
TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
TRNS,FN1, FN2, FN3, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, NLCK,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS, TRNS ),
};
/*
* Fn action definition
*/
#ifdef KEYMAP_SECTION_ENABLE
const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = {
#else
const uint16_t fn_actions[] PROGMEM = {
#endif
/* Poker2 Layout */
[0] = ACTION_LAYER_MOMENTARY(1),
[1] = ACTION_BACKLIGHT_TOGGLE(),
[2] = ACTION_BACKLIGHT_DECREASE(),
[3] = ACTION_BACKLIGHT_INCREASE(),
};
#ifdef KEYMAP_EX_ENABLE
uint16_t keys_count(void) {
return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS;
}
uint16_t fn_actions_count(void) {
return sizeof(fn_actions) / sizeof(fn_actions[0]);
}
#endif

186
keyboard/kimera/kimera.c Normal file
View File

@ -0,0 +1,186 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define KIMERA_C
#include <stdbool.h>
#include <avr/eeprom.h>
#include "kimera.h"
uint8_t mux_mapping[MUX_COUNT] = {
MUX_FOR_ROW, MUX_FOR_COL, MUX_FOR_COL, MUX_FOR_COL
};
uint8_t row_mapping[MATRIX_ROWS] = {
0, 1, 2, 3, 4, 5, 6, 7,
UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED,
UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED, UNCONFIGURED
};
uint8_t col_mapping[MATRIX_COLS] = {
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31
};
uint16_t shift_out_cache = 0;
void kimera_init(void)
{
// read config
if (read_matrix_mapping()) {
write_matrix_mapping();
}
// init shift out pins
MOSI_DDR |= (1<<MOSI_BIT);
SCK_DDR |= (1<<SCK_BIT);
RCK_DDR |= (1<<RCK_BIT);
RCK_PORT |= (1<<RCK_BIT);
// init spi
SPCR |= ((1<<SPE) | (1<<MSTR));
SPSR |= ((1<<SPI2X));
}
uint8_t read_matrix_mapping(void)
{
uint8_t error = 0;
uint8_t mux_config = 0;
uint8_t row_max_count = 0;
uint8_t col_max_count = 0;
mux_config = eeprom_read_byte(EECONFIG_MUX_MAPPING);
if (mux_config & (1<<7)) {
error++;
return error;
}
for (uint8_t i = 0; i < MUX_COUNT; i++) {
mux_mapping[i] = mux_config & (1<<i);
if (mux_mapping[i] == MUX_FOR_COL) {
col_max_count += MUX_PORTS;
}
else {
row_max_count += MUX_PORTS;
}
}
if ((col_max_count == 0) || (row_max_count == 0)) {
error++;
}
uint8_t *mapping = EECONFIG_ROW_COL_MAPPING;
for (uint8_t i = 0; i < row_max_count; i++) {
row_mapping[i] = eeprom_read_byte(mapping++);
if (row_mapping[i] != UNCONFIGURED) {
if (mux_mapping[PX_TO_MUX(row_mapping[i])] != MUX_FOR_ROW) {
row_mapping[i] = UNCONFIGURED;
error++;
}
}
}
for (uint8_t i = 0; i < col_max_count; i++) {
col_mapping[i] = eeprom_read_byte(mapping++);
if (col_mapping[i] != UNCONFIGURED) {
if (mux_mapping[PX_TO_MUX(col_mapping[i])] != MUX_FOR_COL) {
col_mapping[i] = UNCONFIGURED;
error++;
}
}
}
return error;
}
void write_matrix_mapping(void)
{
uint8_t mux_config = 0;
uint8_t row_max_count = 0;
uint8_t col_max_count = 0;
for (uint8_t i = 0; i < MUX_COUNT; i++) {
mux_config |= (mux_mapping[i] << i);
if (mux_mapping[i] == MUX_FOR_COL) {
col_max_count += MUX_PORTS;
}
else {
row_max_count += MUX_PORTS;
}
}
eeprom_write_byte(EECONFIG_MUX_MAPPING, mux_config);
uint8_t *mapping = EECONFIG_ROW_COL_MAPPING;
for (uint8_t i = 0; i < row_max_count; i++) {
eeprom_write_byte(mapping++, row_mapping[i]);
}
for (uint8_t i = 0; i < col_max_count; i++) {
eeprom_write_byte(mapping++, col_mapping[i]);
}
}
void shift_out_word(uint16_t data)
{
SPDR = (data & 0xFF);
while (!(SPSR & (1<<SPIF)));
SPDR = ((data>>8) & 0xFF);
while (!(SPSR & (1<<SPIF)));
RCK_PORT &= ~(1<<RCK_BIT);
RCK_PORT |= (1<<RCK_BIT);
}
void init_cols(void)
{
// init mux io pins
for (uint8_t i = 0; i < MUX_COUNT; i++) {
if (mux_mapping[i] == MUX_FOR_COL) {
ZX_DDR &= ~(1 << zx_bit[i]);
ZX_PORT |= (1 << zx_bit[i]);
}
else {
ZX_DDR |= (1 << zx_bit[i]);
ZX_PORT |= (1 << zx_bit[i]);
}
}
}
matrix_row_t read_cols(void)
{
matrix_row_t cols = 0;
for (uint8_t i = 0; i < MATRIX_COLS; i++) {
uint8_t px = col_mapping[i];
if (px != UNCONFIGURED) {
shift_out_word(shift_out_cache | px_to_shift_out[px]);
// TODO: delay
if (!(ZX_PIN & (1 << zx_bit[PX_TO_MUX(px)]))) {
cols |= (1 << i);
}
}
}
return cols;
}
void unselect_rows(void)
{
shift_out_word(0);
}
void select_row(uint8_t row)
{
uint8_t px = row_mapping[row];
if (px != UNCONFIGURED) {
ZX_PORT &= ~(1 << zx_bit[PX_TO_MUX(px)]);
shift_out_cache = px_to_shift_out[px] | mux_inh_to_shift_out[PX_TO_MUX(px)];
shift_out_word(shift_out_cache);
}
}

186
keyboard/kimera/kimera.h Normal file
View File

@ -0,0 +1,186 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KIMERA_H
#define KIMERA_H
#include <stdint.h>
#include <avr/pgmspace.h>
#include "matrix.h"
/*
Pro Micro
,----------------.
TX --| TX0(PD3) RAW |--
RX --| RX1(PD2) GND |--
--| GND RESET |-- RST
--| GND VCC |--
SDA --| 2(PD1) (PF4)A3 |-- (Z4)
SCL --| 3(PD0) (PF5)A2 |-- (Z1)
(RCK) --| 4(PD4) (PF6)A1 |-- (Z2)
LED1 --| 5(PC6) (PF7)A0 |-- (Z3)
LED2 --| 6(PD7) (PB1)15 |-- SCK
(SJ1) --| 7(PE6) (PB3)14 |-- MISO
(SJ2) --| 8(PB4) (PB2)16 |-- MOSI
BL --| 9(PB5) (PB6)10 |-- LED3
`----------------'
*/
#define LED1_PORT PORTC
#define LED1_PIN PINC
#define LED1_DDR DDRC
#define LED1_BIT PC6
#define LED2_PORT PORTD
#define LED2_PIN PIND
#define LED2_DDR DDRD
#define LED2_BIT PD7
#define LED3_PORT PORTB
#define LED3_PIN PINB
#define LED3_DDR DDRB
#define LED3_BIT PB6
#define BL_PORT PORTB
#define BL_PIN PINB
#define BL_DDR DDRB
#define BL_BIT PB5
#define BL_OCR OCR1A
#define RCK_PORT PORTD
#define RCK_PIN PIND
#define RCK_DDR DDRD
#define RCK_BIT PD4
#define SCK_PORT PORTB
#define SCK_PIN PINB
#define SCK_DDR DDRB
#define SCK_BIT PB1
#define MOSI_PORT PORTB
#define MOSI_PIN PINB
#define MOSI_DDR DDRB
#define MOSI_BIT PB2
#define MISO_PORT PORTB
#define MISO_PIN PINB
#define MISO_DDR DDRB
#define MISO_BIT PB3
#define ZX_PORT PORTF
#define ZX_PIN PINF
#define ZX_DDR DDRF
#ifdef KIMERA_C
const uint8_t PROGMEM zx_bit[] = {
PF5, PF6, PF7, PF4
};
#endif
/*
Shift Register Multiplexer
,----------. ,------------.
MOSI --| SER 0 |----| INH X0~X7 |===============.
SCK --|>SCK 1 |----| A | |
RCK --|>RCK 2 |----| B | ,-------------+-------------.
| 3 |----| C | | | | | | | | |
| | `------------' P26 P27 P28 P25 P29 P32 P30 P31
| | ,------------.
| 4 |----| A X0~X7 |===============.
| 5 |----| B | |
| 6 |----| C | ,-------------+-------------.
| 7 |----| INH | | | | | | | | |
| | `------------' P2 P3 P4 P1 P5 P8 P6 P7
| | ,------------.
| 8 |----| INH X0~X7 |===============.
| 9 |----| A | |
| 10 |----| B | ,-------------+-------------.
| 11 |----| C | | | | | | | | |
| | `------------' P10 P11 P12 P9 P13 P16 P14 P15
| | ,------------.
| 12 |----| A X0~X7 |===============.
| 13 |----| B | |
| 14 |----| C | ,-------------+-------------.
| 15 |----| INH | | | | | | | | |
`----------' `------------' P18 P19 P20 P17 P21 P24 P22 P23
*/
#define MUX_COUNT 4
#define MUX_PORTS 8
#define PX_TO_MUX(x) (x>>3) // (x / MUX_PORTS)
enum {
MUX4_INH = 0,
MUX4_A,
MUX4_B,
MUX4_C,
MUX1_A,
MUX1_B,
MUX1_C,
MUX1_INH,
MUX2_INH,
MUX2_A,
MUX2_B,
MUX2_C,
MUX3_A,
MUX3_B,
MUX3_C,
MUX3_INH
};
#ifdef KIMERA_C
const uint16_t PROGMEM px_to_shift_out[] = {
3<<MUX1_A, 0<<MUX1_A, 1<<MUX1_A, 2<<MUX1_A, 4<<MUX1_A, 6<<MUX1_A, 7<<MUX1_A, 5<<MUX1_A,
3<<MUX2_A, 0<<MUX2_A, 1<<MUX2_A, 2<<MUX2_A, 4<<MUX2_A, 6<<MUX2_A, 7<<MUX2_A, 5<<MUX2_A,
3<<MUX3_A, 0<<MUX3_A, 1<<MUX3_A, 2<<MUX3_A, 4<<MUX3_A, 6<<MUX3_A, 7<<MUX3_A, 5<<MUX3_A,
3<<MUX4_A, 0<<MUX4_A, 1<<MUX4_A, 2<<MUX4_A, 4<<MUX4_A, 6<<MUX4_A, 7<<MUX4_A, 5<<MUX4_A
};
const uint16_t PROGMEM mux_inh_to_shift_out[] = {
1<<MUX1_INH, 1<<MUX2_INH, 1<<MUX3_INH, 1<<MUX4_INH
};
#endif
/* Matrix Mapping in EEPROM */
#define EECONFIG_MUX_MAPPING (uint8_t *)7
#define EECONFIG_ROW_COL_MAPPING (uint8_t *)8
#define MATRIX_MAPPING_SIZE MUX_COUNT * MUX_PORTS
#define EECONFIG_KEYMAP_EX 40
typedef struct {
uint8_t mux_mapping;
uint8_t row_col_mapping;
} matrix_mapping_t;
#define MUX_INPUT 0
#define MUX_OUTPUT 1
#define MUX_FOR_COL MUX_INPUT
#define MUX_FOR_ROW MUX_OUTPUT
#define UNCONFIGURED 0xFF
/* Functions */
void kimera_init(void);
uint8_t read_matrix_mapping(void);
void write_matrix_mapping(void);
void shift_out_word(uint16_t word);
matrix_row_t read_cols(void);
void init_cols(void);
void unselect_rows(void);
void select_row(uint8_t row);
#endif

52
keyboard/kimera/led.c Normal file
View File

@ -0,0 +1,52 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
#include "kimera.h"
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output low
LED1_DDR |= (1<<LED1_BIT);
LED1_PORT &= ~(1<<LED1_BIT);
} else {
// Hi-Z
LED1_DDR &= ~(1<<LED1_BIT);
LED1_PORT &= ~(1<<LED1_BIT);
}
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
// output low
LED2_DDR |= (1<<LED2_BIT);
LED2_PORT &= ~(1<<LED2_BIT);
} else {
// Hi-Z
LED2_DDR &= ~(1<<LED2_BIT);
LED2_PORT &= ~(1<<LED2_BIT);
}
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
// output low
LED3_DDR |= (1<<LED3_BIT);
LED3_PORT &= ~(1<<LED3_BIT);
} else {
// Hi-Z
LED3_DDR &= ~(1<<LED3_BIT);
LED3_PORT &= ~(1<<LED3_BIT);
}
}

137
keyboard/kimera/matrix.c Normal file
View File

@ -0,0 +1,137 @@
/*
Copyright 2014 Kai Ryu <kai1103@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "kimera.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// disable JTAG
MCUCR = (1<<JTD);
MCUCR = (1<<JTD);
kimera_init();
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}