diff --git a/common.mk b/common.mk index 5fb76e73..f9faf2f9 100644 --- a/common.mk +++ b/common.mk @@ -14,6 +14,12 @@ SRC += $(COMMON_DIR)/host.c \ # Option modules +ifdef BOOTMAGIC_ENABLE + SRC += $(COMMON_DIR)/bootmagic.c + SRC += $(COMMON_DIR)/eeconfig.c + OPT_DEFS += -DBOOTMAGIC_ENABLE +endif + ifdef MOUSEKEY_ENABLE SRC += $(COMMON_DIR)/mousekey.c OPT_DEFS += -DMOUSEKEY_ENABLE diff --git a/common/bootloader.c b/common/bootloader.c index 6e04efbb..43a7e47c 100644 --- a/common/bootloader.c +++ b/common/bootloader.c @@ -1,45 +1,106 @@ +#include +#include #include #include +#include #include #include "bootloader.h" -/* Start Bootloader from Application - * See - * http://www.pjrc.com/teensy/jump_to_bootloader.html - * http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html - */ - -// TODO: support usbasp -/* Boot Section Size in bytes - * Teensy halfKay 512 - * Atmel DFU loader 4096 - * LUFA bootloader 4096 - */ -#ifndef BOOT_SIZE -#define BOOT_SIZE 512 +#ifdef PROTOCOL_LUFA +#include #endif -#define FLASH_SIZE (FLASHEND + 1) -#define BOOTLOADER_START (FLASHEND - BOOT_SIZE) +/* Boot Section Size in *BYTEs* + * Teensy halfKay 512 + * Teensy++ halfKay 1024 + * Atmel DFU loader 4096 + * LUFA bootloader 4096 + * USBaspLoader 2048 + */ +#ifndef BOOTLOADER_SIZE +#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h. +#define BOOTLOADER_SIZE 4096 +#endif + +#define FLASH_SIZE (FLASHEND + 1L) +#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE) + + +/* + * Entering the Bootloader via Software + * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html + */ +#define BOOTLOADER_RESET_KEY 0xB007B007 +uint32_t reset_key __attribute__ ((section (".noinit"))); + +/* initialize MCU status by watchdog reset */ void bootloader_jump(void) { +#ifdef PROTOCOL_LUFA + USB_Disable(); cli(); + _delay_ms(2000); +#endif - // - //Teensy - // -#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) - // disable watchdog, if enabled - // disable all peripherals +#ifdef PROTOCOL_PJRC + cli(); UDCON = 1; - USBCON = (1< +#include +#include +#include "matrix.h" +#include "keymap.h" +#include "eeconfig.h" +#include "bootloader.h" +#include "bootmagic.h" + + +void bootmagic(void) +{ + if (!BOOTMAGIC_IS_ENABLED()) { return; } + + /* do scans in case of bounce */ + uint8_t scan = 100; + while (scan--) { matrix_scan(); _delay_ms(1); } + + if (bootmagic_scan_keycode(BOOTMAGIC_BOOTLOADER_KEY)) { + bootloader_jump(); + } + + if (bootmagic_scan_keycode(BOOTMAGIC_DEBUG_ENABLE_KEY)) { + eeconfig_write_debug(eeconfig_read_debug() ^ EECONFIG_DEBUG_ENABLE); + } + + if (bootmagic_scan_keycode(BOOTMAGIC_EEPROM_CLEAR_KEY)) { + eeconfig_init(); + } + + if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_CONTROL_CPASLOCK)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_CONTROL_CAPSLOCK); + } + if (bootmagic_scan_keycode(BOOTMAGIC_CAPSLOCK_TO_CONTROL)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_CAPSLOCK_TO_CONTROL); + } + if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_LALT_LGUI)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_LALT_LGUI); + } + if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_RALT_RGUI)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_RALT_RGUI); + } + if (bootmagic_scan_keycode(BOOTMAGIC_NO_GUI)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_NO_GUI); + } + if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_GRAVE_ESC)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_GRAVE_ESC); + } + if (bootmagic_scan_keycode(BOOTMAGIC_SWAP_BACKSLASH_BACKSPACE)) { + eeconfig_write_keyconf(eeconfig_read_keyconf() ^ EECONFIG_KEYCONF_SWAP_BACKSLASH_BACKSPACE); + } +} + +bool bootmagic_scan_keycode(uint8_t keycode) +{ + for (uint8_t r = 0; r < MATRIX_ROWS; r++) { + matrix_row_t matrix_row = matrix_get_row(r); + for (uint8_t c = 0; c < MATRIX_COLS; c++) { + if (matrix_row & ((matrix_row_t)1<. #include "keyboard.h" #include "bootloader.h" #include "layer_switch.h" +#include "eeconfig.h" #include "command.h" #ifdef MOUSEKEY_ENABLE #include "mousekey.h" #endif -#ifdef HOST_PJRC +#ifdef PROTOCOL_PJRC # include "usb_keyboard.h" # ifdef EXTRAKEY_ENABLE # include "usb_extra.h" # endif #endif -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB # include "usbdrv.h" #endif @@ -108,6 +109,7 @@ static void command_common_help(void) print("v: print device version & info\n"); print("t: print timer count\n"); print("s: print status\n"); + print("e: print eeprom boot config\n"); #ifdef NKRO_ENABLE print("n: toggle NKRO\n"); #endif @@ -121,10 +123,41 @@ static void command_common_help(void) print("Paus: jump to bootloader\n"); } +#ifdef BOOTMAGIC_ENABLE +static void print_eeprom_config(void) +{ + uint8_t eebyte; + + eebyte = eeconfig_read_debug(); + print("debug: "); print_hex8(eebyte); print("\n"); + + eebyte = eeconfig_read_defalt_layer(); + print("defalt_layer: "); print_hex8(eebyte); print("\n"); + + eebyte = eeconfig_read_keyconf(); + print("keyconf: "); print_hex8(eebyte); print("\n"); + + keyconf kc = (keyconf){ .raw = eebyte }; + print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n"); + print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n"); + print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n"); + print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n"); + print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n"); + print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n"); + print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n"); +} +#endif + static bool command_common(uint8_t code) { static host_driver_t *host_driver = 0; switch (code) { +#ifdef BOOTMAGIC_ENABLE + case KC_E: + print("eeprom config\n"); + print_eeprom_config(); + break; +#endif case KC_CAPSLOCK: if (host_get_driver()) { host_driver = host_get_driver(); @@ -218,7 +251,7 @@ static bool command_common(uint8_t code) case KC_S: print("\n\n----- Status -----\n"); print_val_hex8(host_keyboard_leds()); -#ifdef HOST_PJRC +#ifdef PROTOCOL_PJRC print_val_hex8(UDCON); print_val_hex8(UDIEN); print_val_hex8(UDINT); @@ -228,7 +261,7 @@ static bool command_common(uint8_t code) print_val_hex8(usb_keyboard_idle_count); #endif -#ifdef HOST_VUSB +#ifdef PROTOCOL_PJRC # if USB_COUNT_SOF print_val_hex8(usbSofCount); # endif @@ -247,7 +280,7 @@ static bool command_common(uint8_t code) #ifdef EXTRAKEY_ENABLE case KC_PSCREEN: // TODO: Power key should take this feature? otherwise any key during suspend. -#ifdef HOST_PJRC +#ifdef PROTOCOL_PJRC if (suspend && remote_wakeup) { usb_remote_wakeup(); } else { diff --git a/common/eeconfig.c b/common/eeconfig.c new file mode 100644 index 00000000..cea3810e --- /dev/null +++ b/common/eeconfig.c @@ -0,0 +1,38 @@ +#include +#include +#include +#include "eeconfig.h" + + +void eeconfig_init(void) +{ + eeprom_write_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER); + eeprom_write_byte(EECONFIG_DEBUG, 0); + eeprom_write_byte(EECONFIG_DEFAULT_LAYER, 0); + eeprom_write_byte(EECONFIG_KEYCONF, 0); + eeprom_write_byte(EECONFIG_MOUSEKEY_ACCEL, 0); +} + +void eeconfig_enable(void) +{ + eeprom_write_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER); +} + +void eeconfig_disable(void) +{ + eeprom_write_word(EECONFIG_MAGIC, 0xFFFF); +} + +bool eeconfig_is_enabled(void) +{ + return EECONFIG_IS_ENABLED() && (eeprom_read_word(EECONFIG_MAGIC) == EECONFIG_MAGIC_NUMBER); +} + +uint8_t eeconfig_read_debug(void) { return eeprom_read_byte(EECONFIG_DEBUG); } +void eeconfig_write_debug(uint8_t val) { eeprom_write_byte(EECONFIG_DEBUG, val); } + +uint8_t eeconfig_read_defalt_layer(void) { return eeprom_read_byte(EECONFIG_DEFAULT_LAYER); } +void eeconfig_write_defalt_layer(uint8_t val) { eeprom_write_byte(EECONFIG_DEFAULT_LAYER, val); } + +uint8_t eeconfig_read_keyconf(void) { return eeprom_read_byte(EECONFIG_KEYCONF); } +void eeconfig_write_keyconf(uint8_t val) { eeprom_write_byte(EECONFIG_KEYCONF, val); } diff --git a/common/eeconfig.h b/common/eeconfig.h new file mode 100644 index 00000000..3e195478 --- /dev/null +++ b/common/eeconfig.h @@ -0,0 +1,85 @@ +/* +Copyright 2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef EECONFIG_H +#define EECONFIG_H + +#include + +#ifndef EECONFIG_IS_ENABLED +#define EECONFIG_IS_ENABLED() true +#endif + +#define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEED + +/* eeprom parameteter address */ +#define EECONFIG_MAGIC (uint16_t *)0 +#define EECONFIG_DEBUG (uint8_t *)2 +#define EECONFIG_DEFAULT_LAYER (uint8_t *)3 +#define EECONFIG_KEYCONF (uint8_t *)4 +#define EECONFIG_MOUSEKEY_ACCEL (uint8_t *)5 + + +/* debug bit */ +#define EECONFIG_DEBUG_ENABLE (1<<0) +#define EECONFIG_DEBUG_MATRIX (1<<1) +#define EECONFIG_DEBUG_KEYBOARD (1<<2) +#define EECONFIG_DEBUG_MOUSE (1<<3) + +/* keyconf bit */ +#define EECONFIG_KEYCONF_SWAP_CONTROL_CAPSLOCK (1<<0) +#define EECONFIG_KEYCONF_CAPSLOCK_TO_CONTROL (1<<1) +#define EECONFIG_KEYCONF_SWAP_LALT_LGUI (1<<2) +#define EECONFIG_KEYCONF_SWAP_RALT_RGUI (1<<3) +#define EECONFIG_KEYCONF_NO_GUI (1<<4) +#define EECONFIG_KEYCONF_SWAP_GRAVE_ESC (1<<5) +#define EECONFIG_KEYCONF_SWAP_BACKSLASH_BACKSPACE (1<<6) + + +/* XXX: Not portable. Bit field order depends on implementation */ +typedef union { + uint8_t raw; + struct { + bool swap_control_capslock:1; + bool capslock_to_control:1; + bool swap_lalt_lgui:1; + bool swap_ralt_rgui:1; + bool no_gui:1; + bool swap_grave_esc:1; + bool swap_backslash_backspace:1; + bool reserved:1; + }; +} keyconf; + +bool eeconfig_is_enabled(void); + +void eeconfig_init(void); + +void eeconfig_enable(void); + +void eeconfig_disable(void); + +uint8_t eeconfig_read_debug(void); +void eeconfig_write_debug(uint8_t val); + +uint8_t eeconfig_read_defalt_layer(void); +void eeconfig_write_defalt_layer(uint8_t val); + +uint8_t eeconfig_read_keyconf(void); +void eeconfig_write_keyconf(uint8_t val); + +#endif diff --git a/common/keyboard.c b/common/keyboard.c index 91f321d9..401fdb4e 100644 --- a/common/keyboard.c +++ b/common/keyboard.c @@ -28,10 +28,9 @@ along with this program. If not, see . #include "command.h" #include "util.h" #include "sendchar.h" -#include "bootloader.h" -#ifdef MOUSEKEY_ENABLE +#include "bootmagic.h" +#include "eeconfig.h" #include "mousekey.h" -#endif #ifdef MATRIX_HAS_GHOST @@ -59,27 +58,25 @@ void keyboard_init(void) timer_init(); matrix_init(); - - /* matrix scan for boot magic keys */ -#ifdef DEBOUNCE - uint8_t scan = DEBOUNCE * 2; - while (scan--) { matrix_scan(); _delay_ms(1); } -#else - matrix_scan(); -#endif - - /* boot magic keys */ -#ifdef IS_BOOTMAGIC_BOOTLOADER - /* kick up bootloader */ - if (IS_BOOTMAGIC_BOOTLOADER()) bootloader_jump(); -#endif -#ifdef IS_BOOTMAGIC_DEBUG - if (IS_BOOTMAGIC_DEBUG()) debug_enable = true; -#endif - #ifdef PS2_MOUSE_ENABLE ps2_mouse_init(); #endif + +#ifdef BOOTMAGIC_ENABLE + bootmagic(); + + if (eeconfig_is_enabled()) { + uint8_t config; + config = eeconfig_read_debug(); + // ignored if debug is enabled by program before. + if (!debug_enable) debug_enable = (config & EECONFIG_DEBUG_ENABLE); + if (!debug_matrix) debug_matrix = (config & EECONFIG_DEBUG_MATRIX); + if (!debug_keyboard) debug_keyboard = (config & EECONFIG_DEBUG_KEYBOARD); + if (!debug_mouse) debug_mouse = (config & EECONFIG_DEBUG_MOUSE); + } else { + eeconfig_init(); + } +#endif } /* diff --git a/common/keymap.c b/common/keymap.c index aa8d944a..ace3f49b 100644 --- a/common/keymap.c +++ b/common/keymap.c @@ -26,7 +26,7 @@ along with this program. If not, see . static action_t keycode_to_action(uint8_t keycode); -#ifdef USE_KEYMAP_V2 + /* converts key to action */ action_t action_for_key(uint8_t layer, key_t key) { @@ -38,42 +38,20 @@ action_t action_for_key(uint8_t layer, key_t key) return keycode_to_action(keycode); } } -#else -/* - * legacy keymap support - */ -/* translation for legacy keymap */ -action_t action_for_key(uint8_t layer, key_t key) + + +/* Macro */ +__attribute__ ((weak)) +const prog_macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - /* convert from legacy keycode to action */ - /* layer 16-31 indicate 'overlay' but not supported in legacy keymap */ - uint8_t keycode = keymap_get_keycode((layer & OVERLAY_MASK), key.row, key.col); - action_t action; - switch (keycode) { - case KC_FN0 ... KC_FN31: - { - uint8_t layer = keymap_fn_layer(FN_INDEX(keycode)); - uint8_t key = keymap_fn_keycode(FN_INDEX(keycode)); - if (key) { - action.code = ACTION_KEYMAP_TAP_KEY(layer, key); - } else { - action.code = ACTION_KEYMAP_MOMENTARY(layer); - } - } - return action; - default: - return keycode_to_action(keycode); - } + return MACRO_NONE; } -#endif - +/* Function */ __attribute__ ((weak)) -const prog_macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { return MACRO_NONE; } - -__attribute__ ((weak)) -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {} - +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ +} @@ -83,14 +61,9 @@ static action_t keycode_to_action(uint8_t keycode) action_t action; switch (keycode) { case KC_A ... KC_EXSEL: + case KC_LCTRL ... KC_RGUI: action.code = ACTION_KEY(keycode); break; - case KC_LCTRL ... KC_LGUI: - action.code = ACTION_LMOD(keycode); - break; - case KC_RCTRL ... KC_RGUI: - action.code = ACTION_RMOD(keycode); - break; case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE: action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode)); break; @@ -109,3 +82,40 @@ static action_t keycode_to_action(uint8_t keycode) } return action; } + + + +#ifdef USE_LEGACY_KEYMAP +/* + * Legacy keymap support + * Consider using new keymap API instead. + */ +__attribute__ ((weak)) +uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) +{ + return keymap_get_keycode(layer, key.row, key.col); +} + + +/* Legacy keymap support */ +__attribute__ ((weak)) +action_t keymap_fn_to_action(uint8_t keycode) +{ + action_t action = { .code = ACTION_NO }; + switch (keycode) { + case KC_FN0 ... KC_FN31: + { + uint8_t layer = keymap_fn_layer(FN_INDEX(keycode)); + uint8_t key = keymap_fn_keycode(FN_INDEX(keycode)); + if (key) { + action.code = ACTION_KEYMAP_TAP_KEY(layer, key); + } else { + action.code = ACTION_KEYMAP_MOMENTARY(layer); + } + } + return action; + default: + return action; + } +} +#endif diff --git a/common/keymap.h b/common/keymap.h index 0c483483..7efd91f7 100644 --- a/common/keymap.h +++ b/common/keymap.h @@ -23,24 +23,29 @@ along with this program. If not, see . #include "action.h" -#ifdef USE_KEYMAP_V2 -/* translates key to keycode - * layer: 0-15 for base layers - * 16-31 for overlays - */ +/* translates key to keycode */ uint8_t keymap_key_to_keycode(uint8_t layer, key_t key); + /* translates Fn keycode to action */ action_t keymap_fn_to_action(uint8_t keycode); -#else -#warning "You are using LEGACY KEYAMP. Consider using NEW KEYMAP." + + + +#ifdef USE_LEGACY_KEYMAP /* - * legacy keymap support + * Legacy keymap + * Consider using new keymap API above instead. */ /* keycode of key */ +__attribute__ ((deprecated)) uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col); + /* layer to move during press Fn key */ +__attribute__ ((deprecated)) uint8_t keymap_fn_layer(uint8_t fn_bits); + /* keycode to send when release Fn key without using */ +__attribute__ ((deprecated)) uint8_t keymap_fn_keycode(uint8_t fn_bits); #endif diff --git a/common/report.h b/common/report.h index 0995189b..48010276 100644 --- a/common/report.h +++ b/common/report.h @@ -71,7 +71,7 @@ along with this program. If not, see . /* key report size(NKRO or boot mode) */ -#if defined(HOST_PJRC) +#if defined(PROTOCOL_PJRC) # include "usb.h" # if defined(KBD2_REPORT_KEYS) && KBD2_REPORT_KEYS > KBD_REPORT_KEYS # define REPORT_KEYS KBD2_REPORT_KEYS diff --git a/protocol/iwrap.mk b/protocol/iwrap.mk index 9c83075a..96aa4140 100644 --- a/protocol/iwrap.mk +++ b/protocol/iwrap.mk @@ -1,6 +1,6 @@ IWRAP_DIR = protocol/iwrap -OPT_DEFS += -DHOST_IWRAP +OPT_DEFS += -DPROTOCOL_IWRAP SRC += $(IWRAP_DIR)/iwrap.c \ $(IWRAP_DIR)/suart.S \ diff --git a/protocol/iwrap/main.c b/protocol/iwrap/main.c index 05a67337..ac83280f 100644 --- a/protocol/iwrap/main.c +++ b/protocol/iwrap/main.c @@ -26,7 +26,7 @@ along with this program. If not, see . #include "matrix.h" #include "host.h" #include "iwrap.h" -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB # include "vusb.h" # include "usbdrv.h" #endif @@ -78,7 +78,7 @@ static void pullup_pins(void) */ -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB static void disable_vusb(void) { // disable interrupt & disconnect to prevent host from enumerating @@ -131,7 +131,7 @@ int main(void) //pullup_pins(); //set_prr(); -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB disable_vusb(); #endif uart_init(115200); @@ -159,12 +159,12 @@ int main(void) last_timer = timer_read(); while (true) { -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB if (host_get_driver() == vusb_driver()) usbPoll(); #endif keyboard_task(); -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB if (host_get_driver() == vusb_driver()) vusb_transfer_keyboard(); #endif @@ -258,7 +258,7 @@ static uint8_t console_command(uint8_t c) print("r: reset. software reset by watchdog\n"); print("i: insomniac. prevent KB from sleeping\n"); print("c: iwrap_call. CALL for BT connection.\n"); -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB print("u: USB mode. switch to USB.\n"); print("w: BT mode. switch to Bluetooth.\n"); #endif @@ -281,7 +281,7 @@ static uint8_t console_command(uint8_t c) print("iwrap_call()\n"); iwrap_call(); return 1; -#ifdef HOST_VUSB +#ifdef PROTOCOL_VUSB case 'u': print("USB mode\n"); init_vusb(); diff --git a/protocol/lufa.mk b/protocol/lufa.mk index 443b8534..8ea071af 100644 --- a/protocol/lufa.mk +++ b/protocol/lufa.mk @@ -39,4 +39,6 @@ LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENAB OPT_DEFS += -DF_USB=$(F_USB)UL OPT_DEFS += -DARCH=ARCH_$(ARCH) OPT_DEFS += $(LUFA_OPTS) -OPT_DEFS += -DHOST_LUFA + +# This indicates using LUFA stack +OPT_DEFS += -DPROTOCOL_LUFA diff --git a/protocol/pjrc.mk b/protocol/pjrc.mk index cccdf620..27f908b1 100644 --- a/protocol/pjrc.mk +++ b/protocol/pjrc.mk @@ -1,7 +1,5 @@ PJRC_DIR = protocol/pjrc -OPT_DEFS += -DHOST_PJRC - SRC += $(PJRC_DIR)/main.c \ $(PJRC_DIR)/pjrc.c \ $(PJRC_DIR)/usb_keyboard.c \ @@ -19,3 +17,6 @@ endif # Search Path VPATH += $(TOP_DIR)/$(PJRC_DIR) + +# This indicates using LUFA stack +OPT_DEFS += -DPROTOCOL_PJRC diff --git a/protocol/vusb.mk b/protocol/vusb.mk index 4c505811..77b1c633 100644 --- a/protocol/vusb.mk +++ b/protocol/vusb.mk @@ -1,6 +1,6 @@ VUSB_DIR = protocol/vusb -OPT_DEFS += -DHOST_VUSB +OPT_DEFS += -DPROTOCOL_VUSB SRC += $(VUSB_DIR)/main.c \ $(VUSB_DIR)/vusb.c \