Add support of Model F 122 terminal keyboard
- change initialize of keyboard in matrix_scan() - keymap for 122 keys - Mafilefie and config.h for LUFA and PS/2 USART
This commit is contained in:
tmk
parent
dad9dab995
commit
95001dd6e4
113
converter/terminal_usb/Makefile
Normal file
113
converter/terminal_usb/Makefile
Normal file
@ -0,0 +1,113 @@
|
|||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = terminal_lufa
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# keyboard dependent files
|
||||||
|
SRC = keymap.c \
|
||||||
|
matrix.c \
|
||||||
|
led.c
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
|
||||||
|
# MCU name, you MUST set this to match the board you are using
|
||||||
|
# type "make clean" after changing this, so all files will be rebuilt
|
||||||
|
#MCU = at90usb162 # Teensy 1.0
|
||||||
|
MCU = atmega32u4 # Teensy 2.0
|
||||||
|
#MCU = at90usb646 # Teensy++ 1.0
|
||||||
|
#MCU = at90usb1286 # Teensy++ 2.0
|
||||||
|
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# Normally the first thing your program should do is set the clock prescaler,
|
||||||
|
# so your program will run at the correct speed. You should also set this
|
||||||
|
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||||
|
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in bytes
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
#MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
#EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# PS/2 protocol implementations
|
||||||
|
# USART is recommended if it is available, others are for reference purpose.
|
||||||
|
# INT implementation will drop simultaneous key strokes.
|
||||||
|
#
|
||||||
|
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
|
||||||
|
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
|
||||||
|
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
|
||||||
|
|
||||||
|
ifdef PS2_USE_USART
|
||||||
|
SRC += protocol/ps2_usart.c
|
||||||
|
OPT_DEFS += -DPS2_USE_USART
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifdef PS2_USE_INT
|
||||||
|
SRC += protocol/ps2.c
|
||||||
|
OPT_DEFS += -DPS2_USE_INT
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifdef PS2_USE_BUSYWAIT
|
||||||
|
SRC += protocol/ps2.c
|
||||||
|
OPT_DEFS += -DPS2_USE_BUSYWAIT
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
||||||
|
#---------------- Programming Options --------------------------
|
||||||
|
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||||
|
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
|
||||||
|
|
||||||
|
include $(TOP_DIR)/protocol/lufa.mk
|
||||||
|
include $(TOP_DIR)/protocol.mk
|
||||||
|
include $(TOP_DIR)/common.mk
|
||||||
|
include $(TOP_DIR)/rules.mk
|
||||||
@ -1,61 +0,0 @@
|
|||||||
#
|
|
||||||
# Makefile for PJRC Teensy
|
|
||||||
#
|
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension).
|
|
||||||
TARGET = terminal_usb_102_pjrc
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TOP_DIR = ../..
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# keyboard dependent files
|
|
||||||
SRC = keymap_102.c \
|
|
||||||
matrix.c \
|
|
||||||
led.c \
|
|
||||||
ps2.c
|
|
||||||
|
|
||||||
CONFIG_H = config_102_pjrc.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name, you MUST set this to match the board you are using
|
|
||||||
# type "make clean" after changing this, so all files will be rebuilt
|
|
||||||
#MCU = at90usb162 # Teensy 1.0
|
|
||||||
MCU = atmega32u4 # Teensy 2.0
|
|
||||||
#MCU = at90usb646 # Teensy++ 1.0
|
|
||||||
#MCU = at90usb1286 # Teensy++ 2.0
|
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# Normally the first thing your program should do is set the clock prescaler,
|
|
||||||
# so your program will run at the correct speed. You should also set this
|
|
||||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
|
||||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# *Comment out* to disable the options.
|
|
||||||
#
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options --------------------------
|
|
||||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TOP_DIR)
|
|
||||||
|
|
||||||
|
|
||||||
include $(TOP_DIR)/protocol/pjrc.mk
|
|
||||||
include $(TOP_DIR)/protocol.mk
|
|
||||||
include $(TOP_DIR)/common.mk
|
|
||||||
include $(TOP_DIR)/rules.mk
|
|
||||||
@ -1,61 +0,0 @@
|
|||||||
#
|
|
||||||
# Makefile for PJRC Teensy
|
|
||||||
#
|
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension).
|
|
||||||
TARGET = terminal_usb_122_pjrc
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TOP_DIR = ../..
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# keyboard dependent files
|
|
||||||
SRC = keymap_122.c \
|
|
||||||
matrix.c \
|
|
||||||
led.c \
|
|
||||||
ps2.c
|
|
||||||
|
|
||||||
CONFIG_H = config_122_pjrc.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name, you MUST set this to match the board you are using
|
|
||||||
# type "make clean" after changing this, so all files will be rebuilt
|
|
||||||
#MCU = at90usb162 # Teensy 1.0
|
|
||||||
MCU = atmega32u4 # Teensy 2.0
|
|
||||||
#MCU = at90usb646 # Teensy++ 1.0
|
|
||||||
#MCU = at90usb1286 # Teensy++ 2.0
|
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# Normally the first thing your program should do is set the clock prescaler,
|
|
||||||
# so your program will run at the correct speed. You should also set this
|
|
||||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
|
||||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# *Comment out* to disable the options.
|
|
||||||
#
|
|
||||||
#MOUSEKEY_ENABLE = yes # Mouse keys
|
|
||||||
#EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
||||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options --------------------------
|
|
||||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TOP_DIR)
|
|
||||||
|
|
||||||
|
|
||||||
include $(TOP_DIR)/protocol/pjrc.mk
|
|
||||||
include $(TOP_DIR)/protocol.mk
|
|
||||||
include $(TOP_DIR)/common.mk
|
|
||||||
include $(TOP_DIR)/rules.mk
|
|
||||||
138
converter/terminal_usb/config.h
Normal file
138
converter/terminal_usb/config.h
Normal file
@ -0,0 +1,138 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6535
|
||||||
|
#define DEVICE_VER 0x0100
|
||||||
|
#define MANUFACTURER t.m.k.
|
||||||
|
#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 122keys)
|
||||||
|
#define DESCRIPTION USB converter for IBM Terminal Keyboard 122keys
|
||||||
|
|
||||||
|
|
||||||
|
/* matrix size */
|
||||||
|
#define MATRIX_ROWS 17 // keycode bit: 3-0
|
||||||
|
#define MATRIX_COLS 8 // keycode bit: 6-4
|
||||||
|
|
||||||
|
|
||||||
|
/* legacy keymap support */
|
||||||
|
#define USE_LEGACY_KEYMAP
|
||||||
|
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
|
||||||
|
(keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
|
||||||
|
)
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* PS/2 USART configuration for ATMega32U4
|
||||||
|
*/
|
||||||
|
#ifdef PS2_USE_USART
|
||||||
|
/* XCK for clock line */
|
||||||
|
#define PS2_CLOCK_PORT PORTD
|
||||||
|
#define PS2_CLOCK_PIN PIND
|
||||||
|
#define PS2_CLOCK_DDR DDRD
|
||||||
|
#define PS2_CLOCK_BIT 5
|
||||||
|
/* RXD for data line */
|
||||||
|
#define PS2_DATA_PORT PORTD
|
||||||
|
#define PS2_DATA_PIN PIND
|
||||||
|
#define PS2_DATA_DDR DDRD
|
||||||
|
#define PS2_DATA_BIT 2
|
||||||
|
|
||||||
|
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
|
||||||
|
/* set DDR of CLOCK as input to be slave */
|
||||||
|
#define PS2_USART_INIT() do { \
|
||||||
|
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
|
||||||
|
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
|
||||||
|
UCSR1C = ((1 << UMSEL10) | \
|
||||||
|
(3 << UPM10) | \
|
||||||
|
(0 << USBS1) | \
|
||||||
|
(3 << UCSZ10) | \
|
||||||
|
(0 << UCPOL1)); \
|
||||||
|
UCSR1A = 0; \
|
||||||
|
UBRR1H = 0; \
|
||||||
|
UBRR1L = 0; \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_USART_RX_INT_ON() do { \
|
||||||
|
UCSR1B = ((1 << RXCIE1) | \
|
||||||
|
(1 << RXEN1)); \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_USART_RX_POLL_ON() do { \
|
||||||
|
UCSR1B = (1 << RXEN1); \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_USART_OFF() do { \
|
||||||
|
UCSR1C = 0; \
|
||||||
|
UCSR1B &= ~((1 << RXEN1) | \
|
||||||
|
(1 << TXEN1)); \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
|
||||||
|
#define PS2_USART_RX_DATA UDR1
|
||||||
|
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
|
||||||
|
#define PS2_USART_RX_VECT USART1_RX_vect
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* PS/2 Interrupt configuration
|
||||||
|
*/
|
||||||
|
#ifdef PS2_USE_INT
|
||||||
|
/* uses INT1 for clock line(ATMega32U4) */
|
||||||
|
#define PS2_CLOCK_PORT PORTD
|
||||||
|
#define PS2_CLOCK_PIN PIND
|
||||||
|
#define PS2_CLOCK_DDR DDRD
|
||||||
|
#define PS2_CLOCK_BIT 1
|
||||||
|
|
||||||
|
#define PS2_DATA_PORT PORTD
|
||||||
|
#define PS2_DATA_PIN PIND
|
||||||
|
#define PS2_DATA_DDR DDRD
|
||||||
|
#define PS2_DATA_BIT 0
|
||||||
|
|
||||||
|
#define PS2_INT_INIT() do { \
|
||||||
|
EICRA |= ((1<<ISC11) | \
|
||||||
|
(0<<ISC10)); \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_INT_ON() do { \
|
||||||
|
EIMSK |= (1<<INT1); \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_INT_OFF() do { \
|
||||||
|
EIMSK &= ~(1<<INT1); \
|
||||||
|
} while (0)
|
||||||
|
#define PS2_INT_VECT INT1_vect
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* PS/2 Busywait configuration
|
||||||
|
*/
|
||||||
|
#ifdef PS2_USE_BUSYWAIT
|
||||||
|
#define PS2_CLOCK_PORT PORTD
|
||||||
|
#define PS2_CLOCK_PIN PIND
|
||||||
|
#define PS2_CLOCK_DDR DDRD
|
||||||
|
#define PS2_CLOCK_BIT 1
|
||||||
|
|
||||||
|
#define PS2_DATA_PORT PORTD
|
||||||
|
#define PS2_DATA_PIN PIND
|
||||||
|
#define PS2_DATA_DDR DDRD
|
||||||
|
#define PS2_DATA_BIT 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -1,56 +0,0 @@
|
|||||||
/*
|
|
||||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef CONFIG_H
|
|
||||||
#define CONFIG_H
|
|
||||||
|
|
||||||
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6531
|
|
||||||
#define MANUFACTURER t.m.k.
|
|
||||||
#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 102keys)
|
|
||||||
#define DESCRIPTION USB converter for IBM Terminal Keyboard 102keys
|
|
||||||
|
|
||||||
|
|
||||||
/* matrix size */
|
|
||||||
#define MATRIX_ROWS 17 // keycode bit: 3-0
|
|
||||||
#define MATRIX_COLS 8 // keycode bit: 6-4
|
|
||||||
|
|
||||||
|
|
||||||
/* key combination for command */
|
|
||||||
#define IS_COMMAND() ( \
|
|
||||||
keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
/* mouse keys */
|
|
||||||
#ifdef MOUSEKEY_ENABLE
|
|
||||||
# define MOUSEKEY_DELAY_TIME 255
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
/* PS/2 lines */
|
|
||||||
#define PS2_CLOCK_PORT PORTD
|
|
||||||
#define PS2_CLOCK_PIN PIND
|
|
||||||
#define PS2_CLOCK_DDR DDRD
|
|
||||||
#define PS2_CLOCK_BIT 1
|
|
||||||
#define PS2_DATA_PORT PORTD
|
|
||||||
#define PS2_DATA_PIN PIND
|
|
||||||
#define PS2_DATA_DDR DDRD
|
|
||||||
#define PS2_DATA_BIT 0
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -1,56 +0,0 @@
|
|||||||
/*
|
|
||||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef CONFIG_H
|
|
||||||
#define CONFIG_H
|
|
||||||
|
|
||||||
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6532
|
|
||||||
#define MANUFACTURER t.m.k.
|
|
||||||
#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 122keys)
|
|
||||||
#define DESCRIPTION USB converter for IBM Terminal Keyboard 122keys
|
|
||||||
|
|
||||||
|
|
||||||
/* matrix size */
|
|
||||||
#define MATRIX_ROWS 17 // keycode bit: 3-0
|
|
||||||
#define MATRIX_COLS 8 // keycode bit: 6-4
|
|
||||||
|
|
||||||
|
|
||||||
/* key combination for command */
|
|
||||||
#define IS_COMMAND() ( \
|
|
||||||
keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)) \
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
/* mouse keys */
|
|
||||||
#ifdef MOUSEKEY_ENABLE
|
|
||||||
# define MOUSEKEY_DELAY_TIME 255
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
/* PS/2 lines */
|
|
||||||
#define PS2_CLOCK_PORT PORTD
|
|
||||||
#define PS2_CLOCK_PIN PIND
|
|
||||||
#define PS2_CLOCK_DDR DDRD
|
|
||||||
#define PS2_CLOCK_BIT 1
|
|
||||||
#define PS2_DATA_PORT PORTD
|
|
||||||
#define PS2_DATA_PIN PIND
|
|
||||||
#define PS2_DATA_DDR DDRD
|
|
||||||
#define PS2_DATA_BIT 0
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -28,7 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* IBM Terminal keyboard 1392595(102keys)
|
* IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
|
||||||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
|
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
|
||||||
* http://www.seasip.info/VintagePC/ibm_1391406.html
|
* http://www.seasip.info/VintagePC/ibm_1391406.html
|
||||||
*
|
*
|
||||||
@ -114,6 +114,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||||||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
|
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
|
||||||
* `----' `---------------------------------------' `----' `-----------' `---------------'
|
* `----' `---------------------------------------' `----' `-----------' `---------------'
|
||||||
*/
|
*/
|
||||||
|
/*
|
||||||
KEYMAP(
|
KEYMAP(
|
||||||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
|
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
|
||||||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
|
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
|
||||||
@ -124,6 +125,18 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||||||
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
|
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
|
||||||
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
|
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
|
||||||
),
|
),
|
||||||
|
*/
|
||||||
|
// pseudo ANSI
|
||||||
|
KEYMAP(
|
||||||
|
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
|
||||||
|
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
|
||||||
|
|
||||||
|
PSCR,ESC, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
||||||
|
SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, NO, DEL, END, PGDN, P7, P8, P9, PPLS,
|
||||||
|
PAUS,INT5, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, UP, P4, P5, P6, PCMM,
|
||||||
|
APP, INT6, LSFT,LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, NO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
|
||||||
|
RGUI,LGUI, LCTL, LALT, SPC, LGUI, GRV, DOWN, NO, P0, PDOT,NO
|
||||||
|
),
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
@ -1,208 +0,0 @@
|
|||||||
/*
|
|
||||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <stdint.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include <avr/pgmspace.h>
|
|
||||||
#include "keycode.h"
|
|
||||||
#include "print.h"
|
|
||||||
#include "debug.h"
|
|
||||||
#include "util.h"
|
|
||||||
#include "keymap.h"
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* IBM Terminal keyboard 1392595(102keys)
|
|
||||||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
|
|
||||||
* http://www.seasip.info/VintagePC/ibm_1391406.html
|
|
||||||
*
|
|
||||||
* Keymap array:
|
|
||||||
* 8 bytes
|
|
||||||
* +---------+
|
|
||||||
* 0| |
|
|
||||||
* :| | 0x00-0x87
|
|
||||||
* ;| |
|
|
||||||
* 17| |
|
|
||||||
* +---------+
|
|
||||||
*/
|
|
||||||
#define KEYMAP( \
|
|
||||||
K08, K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, K57,K5F,K62, \
|
|
||||||
\
|
|
||||||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
|
|
||||||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
|
|
||||||
K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K6B,K73,K74,K7B, \
|
|
||||||
K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K63, K69,K72,K7A,K79, \
|
|
||||||
K11, K19, K29, K39, K58, K61,K60,K6A, K68,K70,K71,K78 \
|
|
||||||
) { \
|
|
||||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K07 }, \
|
|
||||||
{ KC_##K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K0D, KC_##K0E, KC_##K0F }, \
|
|
||||||
{ KC_NO, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
|
|
||||||
{ KC_NO, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
|
|
||||||
{ KC_NO, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
|
|
||||||
{ KC_NO, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
|
|
||||||
{ KC_NO, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
|
|
||||||
{ KC_NO, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
|
|
||||||
{ KC_NO, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
|
|
||||||
{ KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
|
|
||||||
{ KC_NO, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
|
|
||||||
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
|
|
||||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
|
|
||||||
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
|
|
||||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
|
|
||||||
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
|
|
||||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_##K84, KC_NO, KC_NO, KC_NO, }, \
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
|
|
||||||
static const uint8_t PROGMEM fn_layer[] = {
|
|
||||||
1, // Fn0
|
|
||||||
2, // Fn1
|
|
||||||
3, // Fn2
|
|
||||||
0, // Fn3
|
|
||||||
0, // Fn4
|
|
||||||
0, // Fn5
|
|
||||||
0, // Fn6
|
|
||||||
0 // Fn7
|
|
||||||
};
|
|
||||||
|
|
||||||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
|
|
||||||
// See layer.c for details.
|
|
||||||
static const uint8_t PROGMEM fn_keycode[] = {
|
|
||||||
KC_SCLN, // Fn0
|
|
||||||
KC_SLSH, // Fn1
|
|
||||||
KC_ESC, // Fn2
|
|
||||||
KC_NO, // Fn3
|
|
||||||
KC_NO, // Fn4
|
|
||||||
KC_NO, // Fn5
|
|
||||||
KC_NO, // Fn6
|
|
||||||
KC_NO // Fn7
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
||||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|
||||||
/* 0: default
|
|
||||||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------.
|
|
||||||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
|
|
||||||
* `---' `---------------' `---------------' `---------------' `-----------'
|
|
||||||
* ,-----------------------------------------------------------. ,-----------. ,---------------.
|
|
||||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
|
|
||||||
* |-----------------------------------------------------------| |-----------| |---------------|
|
|
||||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
|
|
||||||
* |-----------------------------------------------------------| `-----------' |-----------| +|
|
|
||||||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
|
|
||||||
* |-----------------------------------------------------------| ,---. |---------------|
|
|
||||||
* |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
|
|
||||||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
|
|
||||||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
|
|
||||||
* `----' `---------------------------------------' `----' `-----------' `---------------'
|
|
||||||
*/
|
|
||||||
KEYMAP(
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
|
|
||||||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
|
||||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
|
|
||||||
LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, NUHS,ENT, P4, P5, P6, PCMM,
|
|
||||||
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, FN1, RO, FN2, UP, P1, P2, P3, PENT,
|
|
||||||
LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
|
|
||||||
),
|
|
||||||
|
|
||||||
/* 1: Mouse keys
|
|
||||||
* ,-----------------------------------------------------------.
|
|
||||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \|
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return |
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift |
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Ctrl | |Alt | Mb1 |Alt | |Ctrl|
|
|
||||||
* `-----' `--------------------------------------' `----'
|
|
||||||
* Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
|
|
||||||
* Vo = Volume, Mut = Mute
|
|
||||||
*/
|
|
||||||
KEYMAP(
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
|
||||||
TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
|
|
||||||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT, P4, P5, P6, PCMM,
|
|
||||||
LSFT,NO, VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, NO, RSFT, UP, P1, P2, P3, PENT,
|
|
||||||
LGUI, LALT, BTN1, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
|
|
||||||
),
|
|
||||||
|
|
||||||
/* 2: Cursor keys
|
|
||||||
* ,-----------------------------------------------------------.
|
|
||||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \|
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return |
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift |
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Ctrl | |Alt | Space |Alt | |Ctrl|
|
|
||||||
* `-----' `--------------------------------------' `----'
|
|
||||||
*/
|
|
||||||
KEYMAP(
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
|
||||||
TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PMNS,
|
|
||||||
LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, P4, P5, P6, PCMM,
|
|
||||||
LSFT,NO, VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, NO, RSFT, UP, P1, P2, P3, PENT,
|
|
||||||
LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
|
|
||||||
),
|
|
||||||
|
|
||||||
/* 3: HHKB
|
|
||||||
* ,-----------------------------------------------------------.
|
|
||||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Shift | | | | | | +| -|End|PgD|Dow|Fn2 |
|
|
||||||
* |-----------------------------------------------------------|
|
|
||||||
* |Ctrl | |Alt | Space |Alt | |Ctrl|
|
|
||||||
* `-----' `--------------------------------------' `----'
|
|
||||||
*/
|
|
||||||
KEYMAP(
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
|
|
||||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
|
||||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
|
|
||||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT, NO, ENT, P4, P5, P6, PCMM,
|
|
||||||
LSFT,NO, NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN, NO, FN2, UP, P1, P2, P3, PENT,
|
|
||||||
LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO
|
|
||||||
),
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
||||||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
|
|
||||||
{
|
|
||||||
return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t keymap_fn_layer(uint8_t index)
|
|
||||||
{
|
|
||||||
return pgm_read_byte(&fn_layer[index]);
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t keymap_fn_keycode(uint8_t index)
|
|
||||||
{
|
|
||||||
return pgm_read_byte(&fn_keycode[index]);
|
|
||||||
}
|
|
||||||
@ -66,20 +66,12 @@ uint8_t matrix_cols(void)
|
|||||||
|
|
||||||
void matrix_init(void)
|
void matrix_init(void)
|
||||||
{
|
{
|
||||||
print_enable = true;
|
|
||||||
debug_enable = true;
|
debug_enable = true;
|
||||||
//debug_matrix = true;
|
//debug_matrix = true;
|
||||||
//debug_keyboard = true;
|
//debug_keyboard = true;
|
||||||
//debug_mouse = false;
|
//debug_mouse = false;
|
||||||
|
|
||||||
ps2_host_init();
|
ps2_host_init();
|
||||||
// Make and Break code without Typematic
|
|
||||||
while (ps2_host_send(0xF8) != 0xFA) {
|
|
||||||
debug("send F8: failed\n");
|
|
||||||
_delay_ms(500);
|
|
||||||
}
|
|
||||||
debug("send F8: OK\n");
|
|
||||||
|
|
||||||
|
|
||||||
// initialize matrix state: all keys off
|
// initialize matrix state: all keys off
|
||||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
|
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
|
||||||
@ -92,46 +84,90 @@ uint8_t matrix_scan(void)
|
|||||||
|
|
||||||
// scan code reading states
|
// scan code reading states
|
||||||
static enum {
|
static enum {
|
||||||
INIT,
|
RESET,
|
||||||
|
RESET_RESPONSE,
|
||||||
|
KBD_ID0,
|
||||||
|
KBD_ID1,
|
||||||
|
CONFIG,
|
||||||
|
READY,
|
||||||
F0,
|
F0,
|
||||||
} state = INIT;
|
} state = RESET;
|
||||||
|
|
||||||
|
|
||||||
is_modified = false;
|
is_modified = false;
|
||||||
|
|
||||||
uint8_t code;
|
uint8_t code;
|
||||||
while ((code = ps2_host_recv())) {
|
if ((code = ps2_host_recv())) {
|
||||||
debug_hex(code);
|
debug("r"); debug_hex(code); debug(" ");
|
||||||
switch (state) {
|
}
|
||||||
case INIT:
|
|
||||||
switch (code) {
|
switch (state) {
|
||||||
case 0xF0:
|
case RESET:
|
||||||
state = F0;
|
debug("wFF ");
|
||||||
debug(" ");
|
if (ps2_host_send(0xFF) == 0xFA) {
|
||||||
break;
|
debug("[ack]\nRESET_RESPONSE: ");
|
||||||
default: // normal key make
|
state = RESET_RESPONSE;
|
||||||
if (code < 0x88) {
|
}
|
||||||
matrix_make(code);
|
break;
|
||||||
} else {
|
case RESET_RESPONSE:
|
||||||
debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
|
if (code == 0xAA) {
|
||||||
}
|
debug("[ok]\nKBD_ID: ");
|
||||||
state = INIT;
|
state = KBD_ID0;
|
||||||
debug("\n");
|
} else if (code) {
|
||||||
}
|
debug("err\nRESET: ");
|
||||||
break;
|
state = RESET;
|
||||||
case F0: // Break code
|
}
|
||||||
switch (code) {
|
break;
|
||||||
default:
|
// after reset receive keyboad ID(2 bytes)
|
||||||
|
case KBD_ID0:
|
||||||
|
if (code) {
|
||||||
|
state = KBD_ID1;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case KBD_ID1:
|
||||||
|
if (code) {
|
||||||
|
debug("\nCONFIG: ");
|
||||||
|
state = CONFIG;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case CONFIG:
|
||||||
|
debug("wF8 ");
|
||||||
|
if (ps2_host_send(0xF8) == 0xFA) {
|
||||||
|
debug("[ack]\nREADY\n");
|
||||||
|
state = READY;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case READY:
|
||||||
|
switch (code) {
|
||||||
|
case 0x00:
|
||||||
|
break;
|
||||||
|
case 0xF0:
|
||||||
|
state = F0;
|
||||||
|
debug(" ");
|
||||||
|
break;
|
||||||
|
default: // normal key make
|
||||||
|
if (code < 0x88) {
|
||||||
|
matrix_make(code);
|
||||||
|
} else {
|
||||||
|
debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
|
||||||
|
}
|
||||||
|
state = READY;
|
||||||
|
debug("\n");
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case F0: // Break code
|
||||||
|
switch (code) {
|
||||||
|
case 0x00:
|
||||||
|
break;
|
||||||
|
default:
|
||||||
if (code < 0x88) {
|
if (code < 0x88) {
|
||||||
matrix_break(code);
|
matrix_break(code);
|
||||||
} else {
|
} else {
|
||||||
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
|
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
|
||||||
}
|
}
|
||||||
state = INIT;
|
state = READY;
|
||||||
debug("\n");
|
debug("\n");
|
||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
}
|
|
||||||
}
|
}
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
|
|||||||
Reference in New Issue
Block a user