@@ -0,0 +1,145 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = smart68_lufa | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
backlight.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Additional definitions from command line | |||
ifdef DEFS | |||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||
endif | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
KEYMAP_EX_ENABLE = yes # External keymap in eeprom | |||
KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/lufa.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -0,0 +1,113 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = smart68_pjrc | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
backlight.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
MCU = atmega32u4 | |||
#MCU = at90usb1286 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Additional definitions from command line | |||
ifdef DEFS | |||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||
endif | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
KEYMAP_EX_ENABLE = yes # External keymap in eeprom | |||
KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/pjrc.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -0,0 +1,52 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#include <avr/pgmspace.h> | |||
#include "backlight.h" | |||
static const uint8_t backlight_table[] PROGMEM = { | |||
0, 16, 128, 255 | |||
}; | |||
/* Backlight pin configuration | |||
* PWM: PB7 | |||
*/ | |||
void backlight_set(uint8_t level) | |||
{ | |||
if (level > 0) { | |||
// Turn on PWM | |||
cli(); | |||
DDRB |= (1<<PB6); | |||
TCCR1A |= ( (1<<WGM10) | (1<<COM1B1) ); | |||
TCCR1B |= ( (1<<CS11) | (1<<CS10) ); | |||
sei(); | |||
// Set PWM | |||
OCR1B = pgm_read_byte(&backlight_table[level]); | |||
} | |||
else { | |||
// Turn off PWM | |||
cli(); | |||
DDRB &= ~(1<<PB6); | |||
TCCR1A &= ~( (1<<WGM10) | (1<<COM1B1) ); | |||
TCCR1B &= ~( (1<<CS11) | (1<<CS10) ); | |||
sei(); | |||
// Set PWM | |||
OCR1B = 0; | |||
} | |||
} |
@@ -0,0 +1,78 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x444C | |||
#define PRODUCT_ID 0x6868 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER DeeLonG | |||
#define PRODUCT SMART68 | |||
#define DESCRIPTION t.m.k. keyboard firmware for SMART68 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
/* keymap in eeprom */ | |||
#define FN_ACTIONS_COUNT 32 | |||
#define KEYMAPS_COUNT 8 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 3 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@@ -0,0 +1,49 @@ | |||
/* | |||
Copyright 2012,2013 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "keymap_common.h" | |||
/* translates key to keycode */ | |||
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) | |||
{ | |||
#ifndef KEYMAP_EX_ENABLE | |||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||
#else | |||
return eeconfig_read_keymap_key(layer, key.row, key.col); | |||
#endif | |||
} | |||
/* translates Fn keycode to action */ | |||
action_t keymap_fn_to_action(uint8_t keycode) | |||
{ | |||
return (action_t) { | |||
#ifndef KEYMAP_EX_ENABLE | |||
.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) | |||
#else | |||
.code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) | |||
#endif | |||
}; | |||
} | |||
#ifdef KEYMAP_EX_ENABLE | |||
const uint8_t* keymaps_pointer(void) { | |||
return (const uint8_t*)keymaps; | |||
} | |||
const uint16_t* fn_actions_pointer(void) { | |||
return fn_actions; | |||
} | |||
#endif |
@@ -0,0 +1,61 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef KEYMAP_COMMON_H | |||
#define KEYMAP_COMMON_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "keycode.h" | |||
#include "action.h" | |||
#include "action_macro.h" | |||
#include "report.h" | |||
#include "host.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "keymap.h" | |||
#include "keymap_ex.h" | |||
/* | |||
#ifdef KEYMAP_EX_ENABLE | |||
extern const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS]; | |||
extern const uint16_t fn_actions[FN_ACTIONS_COUNT]; | |||
#else | |||
*/ | |||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; | |||
extern const uint16_t fn_actions[]; | |||
//#endif | |||
/* SMART68 keymap definition macro */ | |||
#define KEYMAP( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ | |||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E, \ | |||
K46 \ | |||
) { \ | |||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ | |||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ | |||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ | |||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_NO }, \ | |||
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_##K46, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ | |||
} | |||
#endif |
@@ -0,0 +1,78 @@ | |||
#include "keymap_common.h" | |||
// Poker2 | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { | |||
#else | |||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { | |||
#endif | |||
/* Keymap 0: Default Layer | |||
* ,---------------------------------------------------------------. | |||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | `| | |||
* |---------------------------------------------------------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|Del| | |||
* |---------------------------------------------------------------| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |PgU| | |||
* |---------------------------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD| | |||
* |---------------------------------------------------------------| | |||
* |Ctrl|Gui |Alt | Space |Alt |App |Ctrl|Lef|Dow|Rig| | |||
* `---------------------------------------------------------------' | |||
* | Fn0 | | |||
* `---------------------' | |||
*/ | |||
KEYMAP( | |||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,GRV, \ | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS,DEL, \ | |||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, PGUP, \ | |||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT,UP, PGDN, \ | |||
LCTL,LGUI,LALT, SPC, RALT,APP, RCTL,LEFT,DOWN,RGHT, \ | |||
FN0 ), | |||
/* Keymap 1: Fn Layer | |||
* ,---------------------------------------------------------------. | |||
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | |Psc|Slk|Pau| |Ins| | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | | | | |Hom| | |||
* |---------------------------------------------------------------| | |||
* | | |App|Fn1|Fn2|Fn3|VoD|VoU|Mut| | | | |End| | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | | | |||
* `---------------------------------------------------------------' | |||
* | | | |||
* `---------------------' | |||
*/ | |||
KEYMAP( | |||
TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,TRNS,INS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,HOME, \ | |||
TRNS,TRNS,TRNS,FN1, FN2, FN3, VOLD,VOLU,MUTE,TRNS,TRNS, TRNS,TRNS,END, \ | |||
TRNS,TRNS,TRNS, TRNS, NO, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
FN0 ), | |||
}; | |||
/* | |||
* Fn action definition | |||
*/ | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = { | |||
#else | |||
const uint16_t fn_actions[] PROGMEM = { | |||
#endif | |||
/* Poker2 Layout */ | |||
[0] = ACTION_LAYER_MOMENTARY(1), | |||
[1] = ACTION_BACKLIGHT_DECREASE(), | |||
[2] = ACTION_BACKLIGHT_TOGGLE(), | |||
[3] = ACTION_BACKLIGHT_INCREASE() | |||
}; | |||
#ifdef KEYMAP_EX_ENABLE | |||
uint16_t keys_count(void) { | |||
return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS; | |||
} | |||
uint16_t fn_actions_count(void) { | |||
return sizeof(fn_actions) / sizeof(fn_actions[0]); | |||
} | |||
#endif |
@@ -0,0 +1,34 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
void led_set(uint8_t usb_led) | |||
{ | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// output low | |||
DDRB |= (1<<PB2); | |||
PORTB &= ~(1<<PB2); | |||
} else { | |||
// Hi-Z | |||
DDRB &= ~(1<<PB2); | |||
PORTB &= ~(1<<PB2); | |||
} | |||
} |
@@ -0,0 +1,218 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
/* | |||
* scan matrix | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/io.h> | |||
#include <util/delay.h> | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "matrix.h" | |||
#ifndef DEBOUNCE | |||
# define DEBOUNCE 5 | |||
#endif | |||
static uint8_t debouncing = DEBOUNCE; | |||
/* matrix state(1:on, 0:off) */ | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
static matrix_row_t read_cols(void); | |||
static void init_cols(void); | |||
static void unselect_rows(void); | |||
static void select_row(uint8_t row); | |||
inline | |||
uint8_t matrix_rows(void) | |||
{ | |||
return MATRIX_ROWS; | |||
} | |||
inline | |||
uint8_t matrix_cols(void) | |||
{ | |||
return MATRIX_COLS; | |||
} | |||
void matrix_init(void) | |||
{ | |||
// disable JTAG | |||
MCUCR = (1<<JTD); | |||
MCUCR = (1<<JTD); | |||
// initialize row and col | |||
unselect_rows(); | |||
init_cols(); | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = 0; | |||
matrix_debouncing[i] = 0; | |||
} | |||
} | |||
uint8_t matrix_scan(void) | |||
{ | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
select_row(i); | |||
_delay_us(30); // without this wait read unstable value. | |||
matrix_row_t cols = read_cols(); | |||
if (matrix_debouncing[i] != cols) { | |||
matrix_debouncing[i] = cols; | |||
if (debouncing) { | |||
debug("bounce!: "); debug_hex(debouncing); debug("\n"); | |||
} | |||
debouncing = DEBOUNCE; | |||
} | |||
unselect_rows(); | |||
} | |||
if (debouncing) { | |||
if (--debouncing) { | |||
_delay_ms(1); | |||
} else { | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = matrix_debouncing[i]; | |||
} | |||
} | |||
} | |||
return 1; | |||
} | |||
bool matrix_is_modified(void) | |||
{ | |||
if (debouncing) return false; | |||
return true; | |||
} | |||
inline | |||
bool matrix_is_on(uint8_t row, uint8_t col) | |||
{ | |||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||
} | |||
inline | |||
matrix_row_t matrix_get_row(uint8_t row) | |||
{ | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) | |||
{ | |||
print("\nr/c 0123456789ABCDEF\n"); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
phex(row); print(": "); | |||
pbin_reverse16(matrix_get_row(row)); | |||
print("\n"); | |||
} | |||
} | |||
uint8_t matrix_key_count(void) | |||
{ | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += bitpop16(matrix[i]); | |||
} | |||
return count; | |||
} | |||
/* Column pin configuration | |||
* pin: F7 F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0 | |||
*/ | |||
static void init_cols(void) | |||
{ | |||
// Input with pull-up(DDR:0, PORT:1) | |||
DDRF &= ~(1<<PF7 | 1<<PF1 | 1<<PF0); | |||
PORTF |= (1<<PF7 | 1<<PF1 | 1<<PF0); | |||
DDRE &= ~(1<<PE6); | |||
PORTE |= (1<<PE6); | |||
DDRD &= ~(1<<PD7 | 1<<PD6 | 1<<PD4); | |||
PORTD |= (1<<PD7 | 1<<PD6 | 1<<PD4); | |||
DDRC &= ~(1<<PC7 | 1<<PC6); | |||
PORTC |= (1<<PC7 | 1<<PC6); | |||
DDRB &= ~(1<<PB7 | 1<<PB5 | 1<<PB4 | 1<<PB3 | 1<<PB1 | 1<<PB0); | |||
PORTB |= (1<<PB7 | 1<<PB5 | 1<<PB4 | 1<<PB3 | 1<<PB1 | 1<<PB0); | |||
} | |||
/* Column pin configuration | |||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 | |||
* pin: F0 F1 E6 C7 C6 B7 D4 B1 B0 B5 B4 D7 D6 B3 F7 | |||
*/ | |||
static matrix_row_t read_cols(void) | |||
{ | |||
return (PINF&(1<<PF0) ? 0 : (1<<0)) | | |||
(PINF&(1<<PF1) ? 0 : (1<<1)) | | |||
(PINE&(1<<PE6) ? 0 : (1<<2)) | | |||
(PINC&(1<<PC7) ? 0 : (1<<3)) | | |||
(PINC&(1<<PC6) ? 0 : (1<<4)) | | |||
(PINB&(1<<PB7) ? 0 : (1<<5)) | | |||
(PIND&(1<<PD4) ? 0 : (1<<6)) | | |||
(PINB&(1<<PB1) ? 0 : (1<<7)) | | |||
(PINB&(1<<PB0) ? 0 : (1<<8)) | | |||
(PINB&(1<<PB5) ? 0 : (1<<9)) | | |||
(PINB&(1<<PB4) ? 0 : (1<<10)) | | |||
(PIND&(1<<PD7) ? 0 : (1<<11)) | | |||
(PIND&(1<<PD6) ? 0 : (1<<12)) | | |||
(PINB&(1<<PB3) ? 0 : (1<<13)) | | |||
(PINB&(1<<PF7) ? 0 : (1<<14)); | |||
} | |||
/* Row pin configuration | |||
* row: 0 1 2 3 4 | |||
* pin: D0 D1 D2 D3 D5 | |||
*/ | |||
static void unselect_rows(void) | |||
{ | |||
// Hi-Z(DDR:0, PORT:0) to unselect | |||
DDRD &= ~0b00101111; | |||
PORTD &= ~0b00101111; | |||
} | |||
static void select_row(uint8_t row) | |||
{ | |||
// Output low(DDR:1, PORT:0) to select | |||
switch (row) { | |||
case 0: | |||
DDRD |= (1<<0); | |||
PORTD &= ~(1<<0); | |||
break; | |||
case 1: | |||
DDRD |= (1<<1); | |||
PORTD &= ~(1<<1); | |||
break; | |||
case 2: | |||
DDRD |= (1<<2); | |||
PORTD &= ~(1<<2); | |||
break; | |||
case 3: | |||
DDRD |= (1<<3); | |||
PORTD &= ~(1<<3); | |||
break; | |||
case 4: | |||
DDRD |= (1<<5); | |||
PORTD &= ~(1<<5); | |||
break; | |||
} | |||
} |