Add support for AKB96 Lite
This commit is contained in:
Kai Ryu
parent
bb10a45a1f
commit
ed3b4f868a
160
keyboard/akb96/Makefile_lite
Normal file
160
keyboard/akb96/Makefile_lite
Normal file
@ -0,0 +1,160 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = akb96_lite_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# project specific files
|
||||
SRC = keymap_common.c \
|
||||
matrix.c \
|
||||
led.c \
|
||||
backlight.c \
|
||||
ledmap.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymap_default.c $(SRC)
|
||||
endif
|
||||
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# PCB Revision
|
||||
ifdef REV
|
||||
OPT_DEFS += -DREV_$(REV)_LITE
|
||||
else
|
||||
OPT_DEFS += -DREV_V3_LITE
|
||||
endif
|
||||
|
||||
# Additional definitions from command line
|
||||
ifdef DEFS
|
||||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF))
|
||||
endif
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
#MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
USB_6KRO_ENABLE = yes # USB 6key Rollover
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
#PS2_USE_BUSYWAIT = yes
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom
|
||||
#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor
|
||||
SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight
|
||||
FADING_LED_ENABLE = yes # Enable fading backlight
|
||||
BREATHING_LED_ENABLE = yes # Enable breathing backlight
|
||||
LEDMAP_ENABLE = yes # Enable LED mapping
|
||||
LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
@ -39,7 +39,9 @@ static const uint8_t backlight_table[] PROGMEM = {
|
||||
};
|
||||
|
||||
/* Backlight pin configuration
|
||||
* PWM: PB6 (D10)
|
||||
* PWM: PB6 (D10) REV_V2
|
||||
* PB7 REV_V3
|
||||
* PB7 REV_V3_LITE
|
||||
*/
|
||||
void backlight_enable(void)
|
||||
{
|
||||
@ -49,7 +51,7 @@ void backlight_enable(void)
|
||||
// Turn on PWM
|
||||
#if defined(REV_V2)
|
||||
DDRB |= (1<<PB6);
|
||||
#elif defined(REV_V3)
|
||||
#elif defined(REV_V3) || defined(REV_V3_LITE)
|
||||
DDRB |= (1<<PB7);
|
||||
#endif
|
||||
cli();
|
||||
@ -68,7 +70,7 @@ void backlight_disable(void)
|
||||
cli();
|
||||
#if defined(REV_V2)
|
||||
DDRB &= ~(1<<PB6);
|
||||
#elif defined(REV_V3)
|
||||
#elif defined(REV_V3) || defined(REV_V3_LITE)
|
||||
DDRB &= ~(1<<PB7);
|
||||
#endif
|
||||
TCCR1A &= ~( (1<<WGM10) | (1<<COM1B1) );
|
||||
@ -177,7 +179,7 @@ void softpwm_led_init(void)
|
||||
#if defined(REV_V2)
|
||||
DDRB |= (1<<PB6);
|
||||
PORTB &= ~(1<<PB6);
|
||||
#elif defined(REV_V3)
|
||||
#elif defined(REV_V3) || defined(REV_V3_LITE)
|
||||
DDRB |= (1<<PB7);
|
||||
PORTB &= ~(1<<PB7);
|
||||
#endif
|
||||
@ -187,7 +189,7 @@ void softpwm_led_on(uint8_t index)
|
||||
{
|
||||
#if defined(REV_V2)
|
||||
PORTB |= (1<<PB6);
|
||||
#elif defined(REV_V3)
|
||||
#elif defined(REV_V3) || defined(REV_V3_LITE)
|
||||
PORTB |= (1<<PB7);
|
||||
#endif
|
||||
}
|
||||
@ -196,7 +198,7 @@ void softpwm_led_off(uint8_t index)
|
||||
{
|
||||
#if defined(REV_V2)
|
||||
PORTB &= ~(1<<PB6);
|
||||
#elif defined(REV_V3)
|
||||
#elif defined(REV_V3) || defined(REV_V3_LITE)
|
||||
PORTB &= ~(1<<PB7);
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -22,7 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x9696
|
||||
#define DEVICE_VER 0x0002
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER Leon
|
||||
#define PRODUCT Leon AKB96
|
||||
#define DESCRIPTION t.m.k. keyboard firmware for AKB96
|
||||
|
||||
@ -30,6 +30,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
* REV_V3
|
||||
* CapsLock PC7
|
||||
* NumLock PC6
|
||||
* REV_V3_LITE
|
||||
* CapsLock PC2
|
||||
* NumLock PC4
|
||||
*/
|
||||
void led_set(uint8_t usb_led)
|
||||
{
|
||||
@ -71,6 +74,25 @@ void led_set(uint8_t usb_led)
|
||||
DDRC &= ~(1<<PC6);
|
||||
PORTC &= ~(1<<PC6);
|
||||
}
|
||||
#elif defined(REV_V3_LITE)
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// output high
|
||||
DDRC |= (1<<PC2);
|
||||
PORTC |= (1<<PC2);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRC &= ~(1<<PC2);
|
||||
PORTC &= ~(1<<PC2);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// output high
|
||||
DDRC |= (1<<PC4);
|
||||
PORTC |= (1<<PC4);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRC &= ~(1<<PC4);
|
||||
PORTC &= ~(1<<PC4);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@ -24,7 +24,11 @@ uint8_t ledmap_get_code(uint8_t index)
|
||||
* REV_V3
|
||||
* CapsLock PC7
|
||||
* NumLock PC6
|
||||
* Backlight PB6
|
||||
* Backlight PB7
|
||||
* REV_V3_LITE
|
||||
* CapsLock PC2
|
||||
* NumLock PC4
|
||||
* Backlight PB7
|
||||
*/
|
||||
void ledmap_led_init(void)
|
||||
{
|
||||
@ -36,6 +40,11 @@ void ledmap_led_init(void)
|
||||
PORTC &= ~(1<<PC7 | 1<<PC6);
|
||||
DDRB |= (1<<PB7);
|
||||
PORTB &= ~(1<<PB7);
|
||||
#elif defined(REV_V3_LITE)
|
||||
DDRC |= (1<<PC2 | 1<<PC4);
|
||||
PORTC &= ~(1<<PC2 | 1<<PC4);
|
||||
DDRB |= (1<<PB7);
|
||||
PORTB &= ~(1<<PB7);
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -65,6 +74,18 @@ void ledmap_led_on(uint8_t index)
|
||||
PORTB |= (1<<PB7);
|
||||
break;
|
||||
}
|
||||
#elif defined(REV_V3_LITE)
|
||||
switch (index) {
|
||||
case 0:
|
||||
PORTC |= (1<<PC2);
|
||||
break;
|
||||
case 1:
|
||||
PORTC |= (1<<PC4);
|
||||
break;
|
||||
case 2:
|
||||
PORTB |= (1<<PB7);
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -94,6 +115,18 @@ void ledmap_led_off(uint8_t index)
|
||||
PORTB &= ~(1<<PB7);
|
||||
break;
|
||||
}
|
||||
#elif defined(REV_V3_LITE)
|
||||
switch (index) {
|
||||
case 0:
|
||||
PORTC &= ~(1<<PC2);
|
||||
break;
|
||||
case 1:
|
||||
PORTC &= ~(1<<PC4);
|
||||
break;
|
||||
case 2:
|
||||
PORTB &= ~(1<<PB7);
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@ -55,9 +55,11 @@ uint8_t matrix_cols(void)
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
#ifndef REV_V3_LITE
|
||||
// disable JTAG
|
||||
MCUCR = (1<<JTD);
|
||||
MCUCR = (1<<JTD);
|
||||
#endif
|
||||
|
||||
// initialize row and col
|
||||
unselect_rows();
|
||||
@ -141,6 +143,7 @@ uint8_t matrix_key_count(void)
|
||||
* pin: D17 D15 A0 A1 A2 A3 (arduino) REV_V2
|
||||
* PB3 PB1 PF7 PF6 PF5 PF4
|
||||
* PF0 PF1 PF4 PF5 PF6 PF7 REV_V3
|
||||
* PD1 PD2 PD3 PD4 PD5 PD6
|
||||
*/
|
||||
static void init_cols(void)
|
||||
{
|
||||
@ -153,6 +156,9 @@ static void init_cols(void)
|
||||
#elif defined(REV_V3)
|
||||
DDRF &= ~(1<<PF0 | 1<<PF1 | 1<<PF4 | 1<<PF5 | 1<<PF6 | 1<<PF7);
|
||||
PORTF |= (1<<PF0 | 1<<PF1 | 1<<PF4 | 1<<PF5 | 1<<PF6 | 1<<PF7);
|
||||
#elif defined(REV_V3_LITE)
|
||||
DDRD &= ~(1<<PD1 | 1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD5 | 1<<PD6);
|
||||
PORTD |= (1<<PD1 | 1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD5 | 1<<PD6);
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -168,6 +174,8 @@ static matrix_row_t read_cols(void)
|
||||
#elif defined(REV_V3)
|
||||
//return ((~(PINF) >> 4) & 0x0F) | (~(PINF) & (1<<PF0 | 1<<PF1));
|
||||
return (~(PINF) & 0b00000011) | ((~(PINF) >> 2) & 0b00111100);
|
||||
#elif defined(REV_V3_LITE)
|
||||
return ~(PIND) >> 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -193,6 +201,13 @@ static void unselect_rows(void)
|
||||
// Select 0
|
||||
DDRD |= (1<<PD4 | 1<<PD5 | 1<<PD6 | 1<<PD7);
|
||||
PORTD &= ~(1<<PD4 | 1<<PD5 | 1<<PD6 | 1<<PD7);
|
||||
#elif defined(REV_V3_LITE)
|
||||
// Hi-Z(DDR:0, PORT:0) to unselect
|
||||
DDRB &= ~(1<<PB0 | 1<<PB1 | 1<<PB2);
|
||||
PORTB &= ~(1<<PB0 | 1<<PB1 | 1<<PB2);
|
||||
// Select 0
|
||||
DDRB |= (1<<PB3 | 1<<PB4 | 1<<PB5 | 1<<PB6);
|
||||
PORTB &= ~(1<<PB3 | 1<<PB4 | 1<<PB5 | 1<<PB6);
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -215,6 +230,13 @@ static void unselect_rows(void)
|
||||
* PB5 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 |
|
||||
* PB6 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 /
|
||||
*
|
||||
* PB0 - 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 \
|
||||
* / PB3 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 |
|
||||
* | PB4 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 |
|
||||
* | PB5 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 |- REV_V3_LITE
|
||||
* \ PB6 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 |
|
||||
* PB1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 |
|
||||
* PB2 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 /
|
||||
*/
|
||||
static void select_row(uint8_t row)
|
||||
{
|
||||
@ -255,5 +277,22 @@ static void select_row(uint8_t row)
|
||||
DDRB |= (1<<PB6);
|
||||
PORTB &= ~(1<<PB6);
|
||||
}
|
||||
#elif defined(REV_V3_LITE)
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
if (row == 0) {
|
||||
DDRB |= (1<<PB0);
|
||||
PORTB &= ~(1<<PB0);
|
||||
}
|
||||
else if (row < 16) {
|
||||
PORTB = (PORTB & 0b10000111) | ((row & 0x0F) << 3);
|
||||
}
|
||||
else if (row == 16) {
|
||||
DDRB |= (1<<PB1);
|
||||
PORTB &= ~(1<<PB1);
|
||||
}
|
||||
else if (row == 17) {
|
||||
DDRB |= (1<<PB2);
|
||||
PORTB &= ~(1<<PB2);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user