Turn off USB 6KRO for TentaPad

keyboard/tentapad/Makefile

@@ -128,7 +128,7 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes	# Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover
-USB_6KRO_ENABLE = yes	# USB 6key Rollover
+#USB_6KRO_ENABLE = yes	# USB 6key Rollover
 PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 PS2_USE_BUSYWAIT = yes
 BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality

keyboard/tentapad/Makefile.pjrc

@@ -98,7 +98,7 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes	# Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover
-USB_6KRO_ENABLE = yes	# USB 6key Rollover
+#USB_6KRO_ENABLE = yes	# USB 6key Rollover
 PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 PS2_USE_BUSYWAIT = yes
 BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality

keyboard/tentapad/Makefile_gh60

@@ -128,7 +128,7 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes	# Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover
-USB_6KRO_ENABLE = yes	# USB 6key Rollover
+#USB_6KRO_ENABLE = yes	# USB 6key Rollover
 #PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 #PS2_USE_BUSYWAIT = yes
 BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality

keyboard/tentapad/Makefile_gh60.pjrc

@@ -0,0 +1,121 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = tentapad_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c \
+	backlight.c \
+	ledmap.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_default.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Additional definitions from command line
+ifdef DEFS
+    OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF))
+endif
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes	# Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+#USB_6KRO_ENABLE = yes	# USB 6key Rollover
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+#PS2_USE_BUSYWAIT = yes
+BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom
+#KEYMAP_SECTION_ENABLE = yes	# Fixed address keymap for keymap editor
+SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight
+BREATHING_LED_ENABLE = yes # Enable breathing backlight
+#LEDMAP_ENABLE = yes		# Enable LED mapping
+#LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom
+
+OPT_DEFS += -DEXPERIMENTAL
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk