Add initial files for PC98
This commit is contained in:
tmk
parent
7a31451a07
commit
f68c5bf0d3
83
converter/pc98_usb/Makefile
Normal file
83
converter/pc98_usb/Makefile
Normal file
@ -0,0 +1,83 @@
|
|||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = pc98_usb
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# keyboard dependent files
|
||||||
|
SRC = keymap.c \
|
||||||
|
matrix.c \
|
||||||
|
led.c \
|
||||||
|
command_extra.c \
|
||||||
|
protocol/serial_soft.c
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
|
||||||
|
# MCU name, you MUST set this to match the board you are using
|
||||||
|
# type "make clean" after changing this, so all files will be rebuilt
|
||||||
|
#MCU = at90usb162 # Teensy 1.0
|
||||||
|
MCU = atmega32u4 # Teensy 2.0
|
||||||
|
#MCU = at90usb646 # Teensy++ 1.0
|
||||||
|
#MCU = at90usb1286 # Teensy++ 2.0
|
||||||
|
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# Normally the first thing your program should do is set the clock prescaler,
|
||||||
|
# so your program will run at the correct speed. You should also set this
|
||||||
|
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||||
|
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# *Comment out* to disable the options.
|
||||||
|
#
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
|
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in bytes
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
OPT_DEFS += -DBOOT_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
|
||||||
|
|
||||||
|
include $(TOP_DIR)/protocol/lufa.mk
|
||||||
|
include $(TOP_DIR)/protocol.mk
|
||||||
|
include $(TOP_DIR)/common.mk
|
||||||
|
include $(TOP_DIR)/rules.mk
|
||||||
79
converter/pc98_usb/README
Normal file
79
converter/pc98_usb/README
Normal file
@ -0,0 +1,79 @@
|
|||||||
|
Sun to USB keyboard protocol converter
|
||||||
|
======================================
|
||||||
|
Target MCU is ATMega32u4 but other USB capable AVR will also work.
|
||||||
|
Supported keyboards: Sun Type 5 Keyboard, CTCSP SHORT TYPE KEYBOARD(CKUB)
|
||||||
|
|
||||||
|
CTCSP SHORT TYPE KEYBOARD: http://imgur.com/a/QIv6p
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Connector
|
||||||
|
---------
|
||||||
|
8Pin mini DIN
|
||||||
|
___ ___
|
||||||
|
/ |_| \
|
||||||
|
/ 8 7 6 \
|
||||||
|
| 5 4 3 |
|
||||||
|
\_ 2 1 _/
|
||||||
|
\_____/
|
||||||
|
(receptacle)
|
||||||
|
|
||||||
|
Wiring:
|
||||||
|
Pin mini DIN MCU
|
||||||
|
----------------------------------
|
||||||
|
1 GND GND
|
||||||
|
2 GND GND
|
||||||
|
3 5V
|
||||||
|
4 RX/TX(Mouse)
|
||||||
|
5 RX PD3
|
||||||
|
6 TX PD2
|
||||||
|
7 GND GND
|
||||||
|
8 5V VCC
|
||||||
|
|
||||||
|
|
||||||
|
Protocol
|
||||||
|
--------
|
||||||
|
Singnal: Asynchronous, Negative logic, 1200baud, No Flow control
|
||||||
|
Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
|
||||||
|
|
||||||
|
AVR USART engine expects positive logic while Sun keyboard signal is negative.
|
||||||
|
To use AVR UART engine you need exteral inverter in front of RX and TX pin.
|
||||||
|
Otherwise you can software serial routine to communicate the keyboard.
|
||||||
|
|
||||||
|
This converter uses software method, you doesn't need any inverter part.
|
||||||
|
|
||||||
|
|
||||||
|
Commands From System To Keyboard
|
||||||
|
0x01 Reset
|
||||||
|
Keyboard responds with following byte sequence:
|
||||||
|
Success: 0xFF 0x04 0x7F
|
||||||
|
Fail: 0x7E 0x01 0x7F
|
||||||
|
0x02 Bell On
|
||||||
|
0x03 Bell Off
|
||||||
|
0x0A Click On
|
||||||
|
0x0B Click Off
|
||||||
|
0x0E LED
|
||||||
|
followed by LED status byte:
|
||||||
|
bit: 3 2 1 0
|
||||||
|
LED: CapsLk ScrLk Compose NumLk
|
||||||
|
0x0F Layout
|
||||||
|
Keyboard responds with 'Layout Response' 0xFE 0xXX
|
||||||
|
|
||||||
|
Commands From Keyboard To System
|
||||||
|
0x7F Idle
|
||||||
|
means no keys pressed.
|
||||||
|
0xFE Layout Response
|
||||||
|
0xFF Reset Response(followed by 0x04)
|
||||||
|
|
||||||
|
Reference
|
||||||
|
http://kentie.net/article/sunkbd/page2.htm
|
||||||
|
http://kentie.net/article/sunkbd/KBD.pdf
|
||||||
|
|
||||||
|
|
||||||
|
Build Firmware
|
||||||
|
--------------
|
||||||
|
Just use 'make'
|
||||||
|
$ cd sun_usb
|
||||||
|
$ make
|
||||||
|
Then, load the binary to MCU with your favorite programmer.
|
||||||
43
converter/pc98_usb/command_extra.c
Normal file
43
converter/pc98_usb/command_extra.c
Normal file
@ -0,0 +1,43 @@
|
|||||||
|
#include "stdbool.h"
|
||||||
|
#include "stdint.h"
|
||||||
|
#include "keycode.h"
|
||||||
|
#include "serial.h"
|
||||||
|
#include "print.h"
|
||||||
|
#include "command.h"
|
||||||
|
|
||||||
|
bool command_extra(uint8_t code)
|
||||||
|
{
|
||||||
|
switch (code) {
|
||||||
|
case KC_H:
|
||||||
|
case KC_SLASH: /* ? */
|
||||||
|
print("\n\n----- Sun converter Help -----\n");
|
||||||
|
print("UP: Bell On\n");
|
||||||
|
print("DOWN: Bell Off\n");
|
||||||
|
print("LEFT: Click On\n");
|
||||||
|
print("RIGHT: Click Off\n");
|
||||||
|
return false;
|
||||||
|
case KC_UP:
|
||||||
|
print("Bell On\n");
|
||||||
|
serial_send(0x02);
|
||||||
|
break;
|
||||||
|
case KC_DOWN:
|
||||||
|
print("Bell Off\n");
|
||||||
|
serial_send(0x03);
|
||||||
|
break;
|
||||||
|
case KC_LEFT:
|
||||||
|
print("Click On\n");
|
||||||
|
serial_send(0x0A);
|
||||||
|
break;
|
||||||
|
case KC_RIGHT:
|
||||||
|
print("Click Off\n");
|
||||||
|
serial_send(0x0B);
|
||||||
|
break;
|
||||||
|
case KC_NUMLOCK:
|
||||||
|
print("layout\n");
|
||||||
|
serial_send(0x0F);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
94
converter/pc98_usb/config.h
Normal file
94
converter/pc98_usb/config.h
Normal file
@ -0,0 +1,94 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x3333
|
||||||
|
#define DEVICE_VER 0x0100
|
||||||
|
#define MANUFACTURER t.m.k.
|
||||||
|
#define PRODUCT PC98 keyboard converter
|
||||||
|
#define DESCRIPTION converts PC98 keyboard protocol into USB
|
||||||
|
|
||||||
|
|
||||||
|
/* matrix size */
|
||||||
|
#define MATRIX_ROWS 16
|
||||||
|
#define MATRIX_COLS 8
|
||||||
|
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* PC98 control */
|
||||||
|
#define PC98_RST_DDR DDRD
|
||||||
|
#define PC98_RST_PORT PORTD
|
||||||
|
#define PC98_RST_BIT 1
|
||||||
|
#define PC98_RDY_DDR DDRD
|
||||||
|
#define PC98_RDY_PORT PORTD
|
||||||
|
#define PC98_RDY_BIT 4
|
||||||
|
#define PC98_RTY_DDR DDRD
|
||||||
|
#define PC98_RTY_PORT PORTD
|
||||||
|
#define PC98_RTY_BIT 5
|
||||||
|
|
||||||
|
/* Serial(USART) configuration
|
||||||
|
* asynchronous, negative logic, 19200baud, no flow control
|
||||||
|
* 1-start bit, 8-data bit, odd parity, 1-stop bit
|
||||||
|
*/
|
||||||
|
#define SERIAL_BAUD 19200
|
||||||
|
#define SERIAL_PARITY_ODD
|
||||||
|
#define SERIAL_BIT_ORDER_MSB
|
||||||
|
|
||||||
|
#define SERIAL_RXD_DDR DDRD
|
||||||
|
#define SERIAL_RXD_PORT PORTD
|
||||||
|
#define SERIAL_RXD_PIN PIND
|
||||||
|
#define SERIAL_RXD_BIT 2
|
||||||
|
#define SERIAL_RXD_VECT INT2_vect
|
||||||
|
#define SERIAL_RXD_INIT() do { \
|
||||||
|
/* pin configuration: input with pull-up */ \
|
||||||
|
SERIAL_RXD_DDR &= ~(1<<SERIAL_RXD_BIT); \
|
||||||
|
SERIAL_RXD_PORT |= (1<<SERIAL_RXD_BIT); \
|
||||||
|
/* enable interrupt: INT2(rising edge) */ \
|
||||||
|
EICRA |= ((1<<ISC21)|(1<<ISC20)); \
|
||||||
|
EIMSK |= (1<<INT2); \
|
||||||
|
} while (0)
|
||||||
|
#define SERIAL_RXD_INT_ENTER()
|
||||||
|
#define SERIAL_RXD_INT_EXIT() do { \
|
||||||
|
/* clear interrupt flag */ \
|
||||||
|
EIFR = (1<<INTF2); \
|
||||||
|
} while (0)
|
||||||
|
#define SERIAL_RXD_READ() (~SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT))
|
||||||
|
|
||||||
|
#define SERIAL_TXD_DDR DDRD
|
||||||
|
#define SERIAL_TXD_PORT PORTD
|
||||||
|
#define SERIAL_TXD_PIN PIND
|
||||||
|
#define SERIAL_TXD_BIT 3
|
||||||
|
/* negative logic */
|
||||||
|
#define SERIAL_TXD_ON() do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0)
|
||||||
|
#define SERIAL_TXD_OFF() do { SERIAL_TXD_PORT |= (1<<SERIAL_TXD_BIT); } while (0)
|
||||||
|
#define SERIAL_TXD_INIT() do { \
|
||||||
|
/* pin configuration: output */ \
|
||||||
|
SERIAL_TXD_DDR |= (1<<SERIAL_TXD_BIT); \
|
||||||
|
/* idle */ \
|
||||||
|
SERIAL_TXD_ON(); \
|
||||||
|
} while (0)
|
||||||
|
|
||||||
|
#endif
|
||||||
192
converter/pc98_usb/keymap.c
Normal file
192
converter/pc98_usb/keymap.c
Normal file
@ -0,0 +1,192 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
#include "keycode.h"
|
||||||
|
#include "util.h"
|
||||||
|
#include "keymap.h"
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Sun type 5 keyboard
|
||||||
|
,-------. ,---, ,---------------. ,---------------. ,---------------. ,-----------. ,---------------.
|
||||||
|
| 76 | | | | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B| | 16| 17| 15| | 2D| 02| 04| 30|
|
||||||
|
`-------' `---' `---------------' `---------------' `---------------' `-----------' `---------------'
|
||||||
|
,-------. ,-----------------------------------------------------------. ,-----------. ,---------------.
|
||||||
|
| 01| 03| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2C| 34| 60| | 62| 2E| 2F| 47|
|
||||||
|
|-------| |-----------------------------------------------------------| |------------ |---------------|
|
||||||
|
| 19| 1A| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B | | 42| 4A| 7B| | 44| 45| 46| |
|
||||||
|
|-------| |-----------------------------------------------------------| `-----------' |-----------| 7D|
|
||||||
|
| 31| 33| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| |
|
||||||
|
|-------| |-----------------------------------------------------------| ,---. |-----------|---|
|
||||||
|
| 48| 49| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E | | 14| | 70| 71| 72| |
|
||||||
|
|-------| |-----------------------------------------------------------| .-----------. |-----------| 5A|
|
||||||
|
| 5F| 61| | 77 | 13| 78 |*73 | 79 |*74 |*75| 7A | 43| 0D| | 18| 1B| 1C| | 5E | 32| |
|
||||||
|
`-------' `-----------------------------------------------------------' `-----------' `---------------'
|
||||||
|
*/
|
||||||
|
#define KEYMAP( \
|
||||||
|
K76, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, K16,K17,K15, K2D,K02,K04,K30, \
|
||||||
|
K01,K03, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C,K34,K60, K62,K2E,K2F,K47, \
|
||||||
|
K19,K1A, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42,K4A,K7B, K44,K45,K46,K7D, \
|
||||||
|
K31,K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \
|
||||||
|
K48,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, K70,K71,K72,K5A, \
|
||||||
|
K5F,K61, K77,K13, K78, K73, K79, K74, K75, K7A, K43, K0D, K18,K1B,K1C, K5E, K32 \
|
||||||
|
) { \
|
||||||
|
{ KC_NO, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
|
||||||
|
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO, }, \
|
||||||
|
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
|
||||||
|
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
|
||||||
|
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
|
||||||
|
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
|
||||||
|
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
|
||||||
|
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
|
||||||
|
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
|
||||||
|
{ KC_##K48, KC_##K49, KC_##K4A, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
|
||||||
|
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
|
||||||
|
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
|
||||||
|
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
|
||||||
|
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_NO }, \
|
||||||
|
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
|
||||||
|
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_NO, KC_##K7D, KC_NO, KC_NO } \
|
||||||
|
}
|
||||||
|
|
||||||
|
/* CTCSP SHORT TYPE KEYBOARD */
|
||||||
|
#define SHORT_TYPE( \
|
||||||
|
K01, K05,K06,K08,K0A,K0C,K0E, K61,K49,K33, K30, K2C,K34,K60, \
|
||||||
|
K10,K11,K12,K07,K09,K0B, K42,K4A,K7B, \
|
||||||
|
K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, \
|
||||||
|
K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, \
|
||||||
|
K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, \
|
||||||
|
K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K0D,K14,K6E, \
|
||||||
|
K77,K13, K78, K79, K7A,K43,K62,K18,K1B,K1C \
|
||||||
|
) KEYMAP( \
|
||||||
|
HELP, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, PSCR,SLCK,PAUS, MUTE,VOLD,VOLU,PWR, \
|
||||||
|
K01, AGAIN, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C, K34, K60, K62, PSLS,PAST,PMNS, \
|
||||||
|
MENU, UNDO, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42, K4A, K7B, P7, P8, P9, PPLS, \
|
||||||
|
SELECT, COPY, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, P4, P5, P6, \
|
||||||
|
EXECUTE,PASTE, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, P1, P2, P3, PENT, \
|
||||||
|
FIND, CUT, K77,K13, K78, HENK, K79, MHEN, KANA, K7A,K43,K0D, K18, K1B, K1C, P0, PDOT \
|
||||||
|
)
|
||||||
|
|
||||||
|
|
||||||
|
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
|
||||||
|
static const uint8_t PROGMEM fn_layer[] = {
|
||||||
|
2, // Fn0
|
||||||
|
3, // Fn1
|
||||||
|
4, // Fn2
|
||||||
|
0, // Fn3
|
||||||
|
0, // Fn4
|
||||||
|
0, // Fn5
|
||||||
|
0, // Fn6
|
||||||
|
0 // Fn7
|
||||||
|
};
|
||||||
|
|
||||||
|
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
|
||||||
|
// See layer.c for details.
|
||||||
|
static const uint8_t PROGMEM fn_keycode[] = {
|
||||||
|
KC_NO, // Fn0
|
||||||
|
KC_SCLN, // Fn1
|
||||||
|
KC_SLSH, // Fn2
|
||||||
|
KC_NO, // Fn3
|
||||||
|
KC_NO, // Fn4
|
||||||
|
KC_NO, // Fn5
|
||||||
|
KC_NO, // Fn6
|
||||||
|
KC_NO // Fn7
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
/*
|
||||||
|
KEYMAP(
|
||||||
|
HELP, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12, PSCR,SLCK,PAUS, MUTE,VOLD,VOLU,PWR,
|
||||||
|
STOP, AGAIN, ESC,1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
|
||||||
|
MENU, UNDO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, DEL, END, PGDN, P7, P8, P9, PPLS,
|
||||||
|
SELECT, COPY, LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6,
|
||||||
|
EXECUTE,PASTE, LSFT, Z, X, C, V, B, N, M, COMM,DOT,SLSH, RSFT, UP, P1, P2, P3, PENT,
|
||||||
|
FIND, CUT, CAPS, LALT, LGUI,HENK, SPC, MHEN,KANA,RGUI,APP, RALT, LEFT,DOWN,RGHT, P0, PDOT
|
||||||
|
),
|
||||||
|
*/
|
||||||
|
// 0: default
|
||||||
|
SHORT_TYPE(
|
||||||
|
STOP, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
|
||||||
|
F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
|
||||||
|
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV,
|
||||||
|
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC,
|
||||||
|
LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT,
|
||||||
|
LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH, RALT,UP, RSFT,
|
||||||
|
CAPS,LALT,LGUI, SPC, RGUI,APP, NLCK,LEFT,DOWN,RGHT
|
||||||
|
),
|
||||||
|
// 1: with layer keys
|
||||||
|
SHORT_TYPE(
|
||||||
|
ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
|
||||||
|
F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
|
||||||
|
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV,
|
||||||
|
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC,
|
||||||
|
LCTL, A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT,
|
||||||
|
LSFT, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,UP, FN0,
|
||||||
|
CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, LEFT,DOWN,RGHT
|
||||||
|
),
|
||||||
|
// 2: HHKB
|
||||||
|
SHORT_TYPE(
|
||||||
|
ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
|
||||||
|
F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
|
||||||
|
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
|
||||||
|
CAPS, NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, BSPC,
|
||||||
|
LCTL, VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT,
|
||||||
|
LSFT, Z, X, C, V, B, NO, NO, END, PGDN,DOWN, RSFT,PGUP,FN0,
|
||||||
|
CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, HOME,PGDN,END
|
||||||
|
),
|
||||||
|
// 3: Mousekey
|
||||||
|
SHORT_TYPE(
|
||||||
|
ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
|
||||||
|
F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
|
||||||
|
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
|
||||||
|
CAPS, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC,
|
||||||
|
LCTL, NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT,
|
||||||
|
LSFT, NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, RSFT,UP, NO,
|
||||||
|
CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT
|
||||||
|
),
|
||||||
|
// 4: Cursor
|
||||||
|
SHORT_TYPE(
|
||||||
|
ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
|
||||||
|
F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
|
||||||
|
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
|
||||||
|
CAPS, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC,
|
||||||
|
LCTL, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT,
|
||||||
|
LSFT, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,UP, NO,
|
||||||
|
CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT
|
||||||
|
),
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
|
||||||
|
{
|
||||||
|
return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t keymap_fn_layer(uint8_t index)
|
||||||
|
{
|
||||||
|
return pgm_read_byte(&fn_layer[index]);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t keymap_fn_keycode(uint8_t index)
|
||||||
|
{
|
||||||
|
return pgm_read_byte(&fn_keycode[index]);
|
||||||
|
}
|
||||||
33
converter/pc98_usb/led.c
Normal file
33
converter/pc98_usb/led.c
Normal file
@ -0,0 +1,33 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "stdint.h"
|
||||||
|
#include "serial.h"
|
||||||
|
#include "led.h"
|
||||||
|
|
||||||
|
|
||||||
|
void led_set(uint8_t usb_led)
|
||||||
|
{
|
||||||
|
uint8_t sun_led = 0;
|
||||||
|
if (usb_led & (1<<USB_LED_NUM_LOCK)) sun_led |= (1<<0);
|
||||||
|
if (usb_led & (1<<USB_LED_COMPOSE)) sun_led |= (1<<1);
|
||||||
|
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2);
|
||||||
|
if (usb_led & (1<<USB_LED_CAPS_LOCK)) sun_led |= (1<<3);
|
||||||
|
|
||||||
|
serial_send(0x0E);
|
||||||
|
serial_send(sun_led);
|
||||||
|
}
|
||||||
179
converter/pc98_usb/matrix.c
Normal file
179
converter/pc98_usb/matrix.c
Normal file
@ -0,0 +1,179 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <util/delay.h>
|
||||||
|
#include "print.h"
|
||||||
|
#include "util.h"
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "debug.h"
|
||||||
|
#include "protocol/serial.h"
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Matrix Array usage:
|
||||||
|
*
|
||||||
|
* ROW: 16(4bits)
|
||||||
|
* COL: 8(3bits)
|
||||||
|
*
|
||||||
|
* 8bit wide
|
||||||
|
* +---------+
|
||||||
|
* 0|00 ... 07|
|
||||||
|
* 1|08 ... 0F|
|
||||||
|
* :| ... |
|
||||||
|
* :| ... |
|
||||||
|
* E|70 ... 77|
|
||||||
|
* F|78 ... 7F|
|
||||||
|
* +---------+
|
||||||
|
*/
|
||||||
|
static uint8_t matrix[MATRIX_ROWS];
|
||||||
|
#define ROW(code) ((code>>3)&0xF)
|
||||||
|
#define COL(code) (code&0x07)
|
||||||
|
|
||||||
|
static bool is_modified = false;
|
||||||
|
|
||||||
|
|
||||||
|
inline
|
||||||
|
uint8_t matrix_rows(void)
|
||||||
|
{
|
||||||
|
return MATRIX_ROWS;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
uint8_t matrix_cols(void)
|
||||||
|
{
|
||||||
|
return MATRIX_COLS;
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init(void)
|
||||||
|
{
|
||||||
|
print_enable = true;
|
||||||
|
debug_enable = true;
|
||||||
|
|
||||||
|
PC98_RST_DDR |= (1<<PC98_RST_BIT);
|
||||||
|
PC98_RDY_DDR |= (1<<PC98_RDY_BIT);
|
||||||
|
PC98_RTY_DDR |= (1<<PC98_RTY_BIT);
|
||||||
|
PC98_RST_PORT |= (1<<PC98_RST_BIT);
|
||||||
|
PC98_RDY_PORT |= (1<<PC98_RDY_BIT);
|
||||||
|
PC98_RTY_PORT |= (1<<PC98_RTY_BIT);
|
||||||
|
|
||||||
|
|
||||||
|
serial_init();
|
||||||
|
|
||||||
|
// PC98 reset
|
||||||
|
PC98_RST_PORT &= ~(1<<PC98_RST_BIT);
|
||||||
|
_delay_us(15);
|
||||||
|
PC98_RST_PORT |= (1<<PC98_RST_BIT);
|
||||||
|
_delay_us(13);
|
||||||
|
PC98_RDY_PORT |= (1<<PC98_RDY_BIT);
|
||||||
|
|
||||||
|
// initialize matrix state: all keys off
|
||||||
|
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
|
||||||
|
|
||||||
|
debug("init\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t matrix_scan(void)
|
||||||
|
{
|
||||||
|
is_modified = false;
|
||||||
|
|
||||||
|
uint8_t code;
|
||||||
|
PC98_RDY_PORT |= (1<<PC98_RDY_BIT);
|
||||||
|
code = serial_recv();
|
||||||
|
PC98_RDY_PORT &= ~(1<<PC98_RDY_BIT);
|
||||||
|
if (!code) return 0;
|
||||||
|
|
||||||
|
debug_hex(code); debug(" ");
|
||||||
|
|
||||||
|
/*
|
||||||
|
switch (code) {
|
||||||
|
case 0x7E: // reset fail
|
||||||
|
case 0xFE: // layout
|
||||||
|
case 0xFF: // reset success
|
||||||
|
_delay_ms(500);
|
||||||
|
// ignore response byte
|
||||||
|
debug("(response ignored:");
|
||||||
|
while ((code = serial_recv())) { debug(" "); debug_hex(code); }
|
||||||
|
debug(") ");
|
||||||
|
// FALL THROUGH
|
||||||
|
case 0x7F:
|
||||||
|
// all keys up
|
||||||
|
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (code&0x80) {
|
||||||
|
// break code
|
||||||
|
if (matrix_is_on(ROW(code), COL(code))) {
|
||||||
|
matrix[ROW(code)] &= ~(1<<COL(code));
|
||||||
|
is_modified = true;
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
// make code
|
||||||
|
if (!matrix_is_on(ROW(code), COL(code))) {
|
||||||
|
matrix[ROW(code)] |= (1<<COL(code));
|
||||||
|
is_modified = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
return code;
|
||||||
|
}
|
||||||
|
|
||||||
|
bool matrix_is_modified(void)
|
||||||
|
{
|
||||||
|
return is_modified;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
bool matrix_has_ghost(void)
|
||||||
|
{
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||||
|
{
|
||||||
|
return (matrix[row] & (1<<col));
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
uint8_t matrix_get_row(uint8_t row)
|
||||||
|
{
|
||||||
|
return matrix[row];
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_print(void)
|
||||||
|
{
|
||||||
|
print("\nr/c 01234567\n");
|
||||||
|
for (uint8_t row = 0; row < matrix_rows(); row++) {
|
||||||
|
phex(row); print(": ");
|
||||||
|
pbin_reverse(matrix_get_row(row));
|
||||||
|
print("\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t matrix_key_count(void)
|
||||||
|
{
|
||||||
|
uint8_t count = 0;
|
||||||
|
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||||
|
count += bitpop(matrix[i]);
|
||||||
|
}
|
||||||
|
return count;
|
||||||
|
}
|
||||||
@ -106,11 +106,19 @@ ISR(SERIAL_RXD_VECT)
|
|||||||
SERIAL_RXD_INT_ENTER()
|
SERIAL_RXD_INT_ENTER()
|
||||||
|
|
||||||
uint8_t data = 0;
|
uint8_t data = 0;
|
||||||
|
|
||||||
#ifdef SERIAL_BIT_ORDER_MSB
|
#ifdef SERIAL_BIT_ORDER_MSB
|
||||||
uint8_t mask = 0x80;
|
uint8_t mask = 0x80;
|
||||||
#else
|
#else
|
||||||
uint8_t mask = 0x01;
|
uint8_t mask = 0x01;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef SERIAL_PARITY_ODD
|
||||||
|
uint8_t parity = 0;
|
||||||
|
#else
|
||||||
|
uint8_t parity = 1;
|
||||||
|
#endif
|
||||||
|
|
||||||
/* to center of start bit */
|
/* to center of start bit */
|
||||||
_delay_us(WAIT_US/2);
|
_delay_us(WAIT_US/2);
|
||||||
do {
|
do {
|
||||||
@ -119,6 +127,7 @@ ISR(SERIAL_RXD_VECT)
|
|||||||
|
|
||||||
if (SERIAL_RXD_READ()) {
|
if (SERIAL_RXD_READ()) {
|
||||||
data |= mask;
|
data |= mask;
|
||||||
|
parity ^= 1;
|
||||||
}
|
}
|
||||||
#ifdef SERIAL_BIT_ORDER_MSB
|
#ifdef SERIAL_BIT_ORDER_MSB
|
||||||
mask >>= 1;
|
mask >>= 1;
|
||||||
@ -126,11 +135,18 @@ ISR(SERIAL_RXD_VECT)
|
|||||||
mask <<= 1;
|
mask <<= 1;
|
||||||
#endif
|
#endif
|
||||||
} while (mask);
|
} while (mask);
|
||||||
|
|
||||||
|
/* to center of parity bit */
|
||||||
|
_delay_us(WAIT_US);
|
||||||
|
parity ^= SERIAL_RXD_READ();
|
||||||
|
|
||||||
/* to center of stop bit */
|
/* to center of stop bit */
|
||||||
_delay_us(WAIT_US);
|
_delay_us(WAIT_US);
|
||||||
|
_delay_us(WAIT_US/2);
|
||||||
|
|
||||||
|
parity = 1;
|
||||||
uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
|
uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
|
||||||
if (next != rbuf_tail) {
|
if (parity && next != rbuf_tail) {
|
||||||
rbuf[rbuf_head] = data;
|
rbuf[rbuf_head] = data;
|
||||||
rbuf_head = next;
|
rbuf_head = next;
|
||||||
}
|
}
|
||||||
|
|||||||
Reference in New Issue
Block a user