PS/2 to USB keyboard converter
==============================

This firmware converts PS/2 keyboard protocol to USB.


Demostration build
------------------
In this demo build, you can try several layouts,
mouse keys and USB NKRO.

Special keys:
    Magic+0:    Qwerty with mouse keys(default)
    Magic+1:    Qwerty
    Magic+2:    Colemak
    Magic+3:    Dvorak
    Magic+4:    Workman
    Magic+N:    toggles NKRO/6KRO(6KRO by default)
    Magic+Esc:  sends Power Event
    where Magic=(LShift+RShift) or (LControl+RShift)

Keybinds:
    Fn0+(hjkl): Mouse key move(vi cursor)
    Fn0+(yuio): Mouse wheel(left,down,up,right)
    Fn0+space:  Mouse button1
    Fn0+(mnb):  Mouse buttons(1,2,3)
    Fn0+(zxc):  Media control(Volup, Voldown, Mute)
    Fn1+(hjkl): Cursor move(vi cursor)
    Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End)

    Fn2+(esdf): Mouse key move(invert T cursor)
    Fn2+(qwrt): Mouse wheel(left,down,up,right)
    Fn2+space:  Mouse button1
    Fn2+(,./):  Media control(Volup, Voldown, Mute)
    where Fn0=;, Fn1=/, Fn2=a


Features
--------
Mouse keys
    You can emulates mouse move and button click using keyboard.
System/Media control
    You can sends Power event, Volume down/up and Mute.
USB NKRO(actually 120KRO+8Modifiers)
    You can tolggles NKRO/6KRO.(Not tested on Mac.)
Keymap customization
    You can customize keymaps easily by editing source code.


Build for Teensy
----------------
0. Connect PS/2 keyboard to Teensy by 4 lines(Vcc, GND, Data, Clock).
1. Define following macros for PS/2 connection in config_pjrc.h:
   PS2_DATA_PORT
   PS2_DATA_PIN
   PS2_DATA_DDR
   PS2_DATA_BIT
   PS2_CLOCK_PORT
   PS2_CLOCK_PIN
   PS2_CLOCK_DDR
   PS2_CLOCK_BIT
2. Edit Makefile for build options and MCU setting.
2. make
3. program Teensy.
   http://www.pjrc.com/teensy/loader.html


Build for V-USB
---------------
0. Build V-USB controller board and connect PS/2 keyboard.
1. Define macros in config_vusb.h if needed.
2. Edit Makefile.vusb for build options and MCU setting.
3. make -f Makefile.vusb
4. program your V-USB controller.


V-USB Circuit
-------------
                +---+   +---------------+
USB            GND  |   |   ATmega168   |
===                 C3  |               |
5V <-------+--------+---|Vcc,AVCC       |        PS/2
           R1           |               |        ====
D- <----+--+-----R2-----|INT0        RXD|------->DATA
D+ <----|---+----R3-----|INT1        XCK|------->CLOCK
        Z1  Z2          |               |      ->5V
GND<----+---+--+--+-----|GND            |      ->GND
               |  |     |               |
               |  C2-+--|XTAL1          |
               |     X1 |               |
               +--C3-+--|XTAL2          |
                        +---------------+
R1:     1.5K Ohm
R2,R3:  68 Ohm
Z1,Z2:  Zenner 3.6V
C1,C2:  22pF
C3:     0.1uF
X1:     Crystal 20MHz(16MHz/12MHz)


Keymap
------
You can change a keymap by editing code of keymap.c like following.
How to define the keymap is probably obvious. You can find  key
symbols in usb_keycodes.h.
If you want to define more than one keymap, see hhkb/keymap.c and
macway/keymap.c as examples. To define keymap(layer) switching may
needs a bit of your effort at this time.

    /* Default Layer: plain keymap
     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
     * ,-----------------------------------------------------------. ,-----------. ,---------------.
     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
     * |-----------------------------------------------------------| |-----------| |---------------|
     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
     * |-----------------------------------------------------------| `-----------' |-----------|  +|
     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
     * |-----------------------------------------------------------|     ,---.     |---------------|
     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
     * `-----------------------------------------------------------' `-----------' `---------------'
     */
    KEYMAP(
    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,          PWR, F13, F14,
    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
    ),


EOF