You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.
tmk 467602749d Fix fn_actions for keymap editor 8 anni fa
..
Makefile Change TMK_DIR setting 9 anni fa
Makefile.teensy Change TMK_DIR setting 9 anni fa
Makefile.tmk_rev1 m0110_usb: Change keymap and Makefile 8 anni fa
Makefile.tmk_rev2 m0110_usb: Change keymap and Makefile 8 anni fa
README.md m0110_usb: Change keymap and Makefile 8 anni fa
config.h Change keymap and enable bootmagic of M0110 10 anni fa
keymap_common.c Change key_t to keypos_t 9 anni fa
keymap_common.h m0110_usb: Change keymap and Makefile 8 anni fa
keymap_default.c Fix fn_actions for keymap editor 8 anni fa
keymap_hasu.c Change keymaps of M0110 9 anni fa
keymap_intl.c m0110_usb: Change keymap and Makefile 8 anni fa
keymap_spacefn.c Change keymaps of M0110 9 anni fa
led.c m0110: Add support for international keyboard 9 anni fa
matrix.c m0110_usb: Add LED flash on startup 8 anni fa

README.md

M0110/M0110A to USB keyboard converter

This firmware converts the protocol of Apple Macintosh keyboard M0110, M0110A and M0120 into USB. Target of this project is USB AVR controller like ATmega32U2 and ATmega32U4. Using this converter you can revive these retro keyboards with modern computer.

Read README of top directory too.

Pictures of M0110 + M0120 and M0110A.

M0110A

  • M0110A support was contributed by skagon@github.
  • M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.

Update

  • 2013/08: Change port for signals PF to PD
  • 2013/09: Change port again, it uses inversely PD0 for data and PD1 for clock line now.
  • 2014/06: Change keymaps
  • 2015/03: Add support for “International”(ISO) keyboard(keymap_intl.c)

Building Hardware

You need TMK converter or AVR dev board like PJRC Teensy. Port of the MCU PD1 is assigned to CLOCK line and PD0 to DATA by default, you can change pin configuration with editing config.h.

M0110 Converter

4P4C phone handset cable

Note that original cable used with Mac is straight while phone handset cable is crossover.

http://en.wikipedia.org/wiki/Modular_connector#4P4C

Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. 4P4C cable

Socket Pinout

Jack fig

Pull-up Resistor

You may need pull-up resistors on signal lines(CLOCK, DATA) in particular when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.

Building Firmware

To compile firmware you need AVR GCC. You can edit Makefile and config.h to change compile options and pin configuration. Also KEYMAP option can be used to select keymap.

$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb
$ make -f Makefile.rev2 clean
$ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}]

Use Maefile.tmk_rev1 for TMK converter Rev.1, Makefile.teensy for Teensy instead.

Keymap

To create your own keymap copy existent keymap file to keymap_name.c and edit it.

Debug

You can use PJRC HID listen to see debug output. The converter has some functions for debug, press <Magic>+H simultaneously to get help.

  • Magic combo: Shift+Option+⌘ or Shift+Option+Ctrl(Shift+Alt+Gui or Shift+Alt+Control)