You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

Makefile 4.4KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144
  1. #----------------------------------------------------------------------------
  2. # On command line:
  3. #
  4. # make all = Make software.
  5. #
  6. # make clean = Clean out built project files.
  7. #
  8. # make coff = Convert ELF to AVR COFF.
  9. #
  10. # make extcoff = Convert ELF to AVR Extended COFF.
  11. #
  12. # make program = Download the hex file to the device.
  13. # Please customize your programmer settings(PROGRAM_CMD)
  14. #
  15. # make teensy = Download the hex file to the device, using teensy_loader_cli.
  16. # (must have teensy_loader_cli installed).
  17. #
  18. # make dfu = Download the hex file to the device, using dfu-programmer (must
  19. # have dfu-programmer installed).
  20. #
  21. # make flip = Download the hex file to the device, using Atmel FLIP (must
  22. # have Atmel FLIP installed).
  23. #
  24. # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  25. # (must have dfu-programmer installed).
  26. #
  27. # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  28. # (must have Atmel FLIP installed).
  29. #
  30. # make debug = Start either simulavr or avarice as specified for debugging,
  31. # with avr-gdb or avr-insight as the front end for debugging.
  32. #
  33. # make filename.s = Just compile filename.c into the assembler code only.
  34. #
  35. # make filename.i = Create a preprocessed source file for use in submitting
  36. # bug reports to the GCC project.
  37. #
  38. # To rebuild project do "make clean" then "make all".
  39. #----------------------------------------------------------------------------
  40. # Target file name (without extension).
  41. TARGET = usb_usb
  42. TMK_DIR = ../../tmk_core_custom
  43. # Directory keyboard dependent files exist
  44. TARGET_DIR = .
  45. # MCU name
  46. MCU = atmega32u4
  47. # Processor frequency.
  48. # This will define a symbol, F_CPU, in all source code files equal to the
  49. # processor frequency in Hz. You can then use this symbol in your source code to
  50. # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  51. # automatically to create a 32-bit value in your source code.
  52. #
  53. # This will be an integer division of F_USB below, as it is sourced by
  54. # F_USB after it has run through any CPU prescalers. Note that this value
  55. # does not *change* the processor frequency - it should merely be updated to
  56. # reflect the processor speed set externally so that the code can use accurate
  57. # software delays.
  58. F_CPU = 16000000
  59. #
  60. # LUFA specific
  61. #
  62. # Target architecture (see library "Board Types" documentation).
  63. ARCH = AVR8
  64. # Input clock frequency.
  65. # This will define a symbol, F_USB, in all source code files equal to the
  66. # input clock frequency (before any prescaling is performed) in Hz. This value may
  67. # differ from F_CPU if prescaling is used on the latter, and is required as the
  68. # raw input clock is fed directly to the PLL sections of the AVR for high speed
  69. # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  70. # at the end, this will be done automatically to create a 32-bit value in your
  71. # source code.
  72. #
  73. # If no clock division is performed on the input clock inside the AVR (via the
  74. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  75. F_USB = $(F_CPU)
  76. # Interrupt driven control endpoint task
  77. OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  78. # Build Options
  79. # comment out to disable the options.
  80. #
  81. MOUSEKEY_ENABLE = yes # Mouse keys
  82. #EXTRAKEY_ENABLE = yes # Media control and System control
  83. #CONSOLE_ENABLE = yes # Console for debug
  84. #COMMAND_ENABLE = yes # Commands for debug and configuration
  85. #NKRO_ENABLE = yes # USB Nkey Rollover
  86. KEYMAP_IN_EEPROM_ENABLE = yes # External keymap in eeprom
  87. LEDMAP_ENABLE = yes # Enable LED mapping
  88. LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom
  89. # Boot Section Size in bytes
  90. # Teensy halfKay 512
  91. # Atmel DFU loader 4096
  92. # LUFA bootloader 4096
  93. OPT_DEFS += -DBOOTLOADER_SIZE=4096
  94. #LDFLAGS += -Wl,--relax
  95. #OPT_DEFS += -DNO_ACTION_TAPPING
  96. #OPT_DEFS += -DNO_ACTION_LAYER
  97. #OPT_DEFS += -DNO_ACTION_MACRO
  98. SRC = \
  99. keymap_common.c \
  100. ledmap.c \
  101. usb_usb.cpp \
  102. main.cpp
  103. ifdef KEYMAP
  104. SRC := keymap_$(KEYMAP).c $(SRC)
  105. else
  106. SRC := keymap.c $(SRC)
  107. endif
  108. CONFIG_H = config.h
  109. # Search Path
  110. VPATH += $(TARGET_DIR)
  111. VPATH += $(TMK_DIR)
  112. # program Leonardo
  113. PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -b57600 -Uflash:w:$(TARGET).hex -P$(DEV)
  114. include $(TMK_DIR)/protocol/usb_hid.mk
  115. include $(TMK_DIR)/protocol/lufa.mk
  116. include $(TMK_DIR)/common.mk
  117. include $(TMK_DIR)/rules.mk