1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
tmk_keyboard_custom/converter/sun_usb/config.h
2012-10-21 22:12:36 +09:00

83 lines
2.7 KiB
C

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3333
#define DEVICE_VER 0x0100
#define MANUFACTURER t.m.k.
#define PRODUCT Sun keyboard converter
#define DESCRIPTION converts Sun keyboard protocol into USB
/* matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Serial(USART) configuration
* asynchronous, negative logic, 1200baud, no flow control
* 1-start bit, 8-data bit, non parity, 1-stop bit
*/
#define SERIAL_BAUD 1200
#define SERIAL_RXD_DDR DDRD
#define SERIAL_RXD_PORT PORTD
#define SERIAL_RXD_PIN PIND
#define SERIAL_RXD_BIT 2
#define SERIAL_RXD_VECT INT2_vect
#define SERIAL_RXD_INIT() do { \
/* pin configuration: input with pull-up */ \
SERIAL_RXD_DDR &= ~(1<<SERIAL_RXD_BIT); \
SERIAL_RXD_PORT |= (1<<SERIAL_RXD_BIT); \
/* enable interrupt: INT2(rising edge) */ \
EICRA |= ((1<<ISC21)|(1<<ISC20)); \
EIMSK |= (1<<INT2); \
} while (0)
#define SERIAL_RXD_INT_ENTER()
#define SERIAL_RXD_INT_EXIT() do { \
/* clear interrupt flag */ \
EIFR = (1<<INTF2); \
} while (0)
#define SERIAL_RXD_READ() (~SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT))
#define SERIAL_TXD_DDR DDRD
#define SERIAL_TXD_PORT PORTD
#define SERIAL_TXD_PIN PIND
#define SERIAL_TXD_BIT 3
/* negative logic */
#define SERIAL_TXD_ON() do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0)
#define SERIAL_TXD_OFF() do { SERIAL_TXD_PORT |= (1<<SERIAL_TXD_BIT); } while (0)
#define SERIAL_TXD_INIT() do { \
/* pin configuration: output */ \
SERIAL_TXD_DDR |= (1<<SERIAL_TXD_BIT); \
/* idle */ \
SERIAL_TXD_ON(); \
} while (0)
#endif