Nelze vybrat více než 25 témat Téma musí začínat písmenem nebo číslem, může obsahovat pomlčky („-“) a může být dlouhé až 35 znaků.
Tento repozitář je archivovaný. Můžete prohlížet soubory, klonovat, ale nemůžete nahrávat a vytvářet nové úkoly a požadavky na natažení.

backlight.c 2.2KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485
  1. /*
  2. Copyright 2013,2014 Kai Ryu <[email protected]>
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #include <avr/io.h>
  15. #include <avr/interrupt.h>
  16. #include <avr/pgmspace.h>
  17. #include "backlight.h"
  18. #if defined(GH60_REV_CHN)
  19. static const uint8_t backlight_table[] PROGMEM = {
  20. 0, 16, 128, 255
  21. };
  22. /* Backlight pin configuration
  23. * PWM: PB7
  24. */
  25. void backlight_set(uint8_t level)
  26. {
  27. if (level > 0) {
  28. // Turn on PWM
  29. cli();
  30. DDRB |= (1<<PB6);
  31. TCCR1A |= ( (1<<WGM10) | (1<<COM1B1) );
  32. TCCR1B |= ( (1<<CS11) | (1<<CS10) );
  33. sei();
  34. // Set PWM
  35. OCR1B = pgm_read_byte(&backlight_table[level]);
  36. }
  37. else {
  38. // Turn off PWM
  39. cli();
  40. DDRB &= ~(1<<PB6);
  41. TCCR1A &= ~( (1<<WGM10) | (1<<COM1B1) );
  42. TCCR1B &= ~( (1<<CS11) | (1<<CS10) );
  43. sei();
  44. // Set PWM
  45. OCR1B = 0;
  46. }
  47. }
  48. #elif #defined(GH60_REV_CNY)
  49. static const uint8_t backlight_table[] PROGMEM = {
  50. 0, 16, 128, 255
  51. };
  52. void backlight_set(uint8_t level)
  53. {
  54. if (level > 0) {
  55. led_matrix_disable();
  56. for (uint8_t row = 0; row < LED_MATRIX_ROWS; row++) {
  57. for (uint8_t col = 0; col < LED_MATRIX_COLS; col++) {
  58. led_matrix_set_value(row, col, pgm_read_byte(&backlight_table[level]));
  59. }
  60. }
  61. led_matrix_enable();
  62. }
  63. else {
  64. led_matrix_disable();
  65. }
  66. }
  67. #else
  68. void backlight_set(uint8_t level)
  69. {
  70. if (level > 0) {
  71. DDRF |= (1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4);
  72. PORTF &= ~(1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4);
  73. }
  74. else {
  75. DDRF &= ~(1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4);
  76. }
  77. }
  78. #endif