tmk_keyboard_custom

Archived

This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.

History

tmk 7860d09914 Change TMK_DIR setting		2015-04-10 01:53:24 +09:00
..
config.h	Add ascii_usb ASCII Serial Console terminal converter	2014-01-03 07:07:42 +09:00
keymap.c	Change key_t to keypos_t	2014-11-24 15:14:52 +09:00
led.c	Add ascii_usb ASCII Serial Console terminal converter	2014-01-03 07:07:42 +09:00
Makefile	Change TMK_DIR setting	2015-04-10 01:53:24 +09:00
matrix.c	Add ascii_usb ASCII Serial Console terminal converter	2014-01-03 07:07:42 +09:00
README	Spellchecking converter README files.	2014-01-07 11:03:18 +09:00

README

ASCII to USB keyboard protocol converter
========================================
This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
Target MCU is ATMega32u4 but other USB capable AVR will also work.


Hardware
--------
Connect RX, TX and GND to UART pin of AVR. Note that you may need line driver/level shifter like MAX232 to interface high voltage of RS-232C.



Build Firmware
--------------
Configure UART setting and Just use 'make'

    $ cd ascii_usb
    $ make

Then, load the binary to MCU with your favorite programmer.



Limitation
----------
- This cannot see key up event, you cannot hold a key.
- Alt, Gui(Win/Mac) modifier key are not available.



TRS-80 model 100
----------------
Use TELCOM program with setting: 19200bps/8bit/odd parity/1stop bit
To set this configuration push Stat(F3) and input '9801D,10'. Then push Term(F4) to connect.