Archived

This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.

History

Ralf Schmitt d9b5f5110e Added NerD 60% support		2015-01-18 11:43:37 +01:00
..
backlight.c	Added NerD 60% support	2015-01-18 11:43:37 +01:00
backlight.h	Added NerD 60% support	2015-01-18 11:43:37 +01:00
config.h	Added NerD 60% support	2015-01-18 11:43:37 +01:00
keymap_ansi150.c	Added NerD 60% support	2015-01-18 11:43:37 +01:00
keymap_common.c	Added NerD 60% support	2015-01-18 11:43:37 +01:00
keymap_common.h	Added NerD 60% support	2015-01-18 11:43:37 +01:00
led.c	Added NerD 60% support	2015-01-18 11:43:37 +01:00
Makefile	Added NerD 60% support	2015-01-18 11:43:37 +01:00
matrix.c	Added NerD 60% support	2015-01-18 11:43:37 +01:00
README.md	Added NerD 60% support	2015-01-18 11:43:37 +01:00

README.md

NerD keyboard firmware

Korean Keyboard designed by GON.

Note that this is not the official firmware

Hardware revision

This firmware was developed and tested for NerD pcb version 1.61 and 2.0.

Supported features

All layout options are supported
All leds are supported

Changing Bootloader

You can't simply just upload this firmware to a new NerD board because the original bootloader won't accept DFU connections.

You can change the bootloader of the keyboard with an ISP programmer of your choice. The bootloader pins are easy to access on the NerD pcb.

Be aware that after changing the bootloader the official configuration software won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.

Build

Move to this directory then just run make.

Jump to Bootloader

You can jump to bootloader by software if you have a macro defined for this in your keymap. The default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump.