Tandy 1000 Converter, basicly works, except for packet mismatches

- Caused by too much processing in the converter...
- Easy to fix if I remove the macro engine...

Debug/led/led.c

@@ -31,14 +31,14 @@
 // ----- Functions -----
 
 // Error LED Setup
-void init_errorLED()
+inline void init_errorLED()
 {
 	// Use pin D6 as an output (LED)
 	DDRD |= (1<<6);
 }
 
 // Error LED Control
-void errorLED( uint8_t on )
+inline void errorLED( uint8_t on )
 {
 	// Error LED On (D6)
 	if ( on ) {

Keymap/keymap.h

@@ -30,16 +30,208 @@
 
 // ----- Defines -----
 
-// Modifier Mask
-#define MODIFIERS_KEYPAD   0
-#define MODIFIERS_KEYBOARD 4
-
 
 
 // ----- Variables -----
 
+static uint8_t tandy1000_modifierMask[] = { 0x1D, 0x2A, 0x36, 0x38, 0x46 };
+
+/*
+static uint8_t tandy1000_map[] = { 0,
+				KEY_ESC,
+				KEY_1,
+				KEY_2,
+				KEY_3,
+				KEY_4,
+				KEY_5,
+				KEY_6,
+				KEY_7,
+				KEY_8,
+				KEY_9,
+				KEY_0,
+				KEY_MINUS,
+				KEY_EQUAL,
+				KEY_BACKSPACE,
+				KEY_TAB,
+				KEY_Q,
+				KEY_W,
+				KEY_E,
+				KEY_R,
+				KEY_T,
+				KEY_Y,
+				KEY_U,
+				KEY_I,
+				KEY_O,
+				KEY_P,
+				KEY_LEFT_BRACE,
+				KEY_RIGHT_BRACE,
+				KEY_ENTER,
+				KEY_CTRL, // 0x1D
+				KEY_A,
+				KEY_S,
+				KEY_D,
+				KEY_F,
+				KEY_G,
+				KEY_H,
+				KEY_J,
+				KEY_K,
+				KEY_L,
+				KEY_SEMICOLON,
+				KEY_QUOTE,
+				KEY_UP,
+				KEY_LEFT_SHIFT, // 0x2A
+				KEY_LEFT,
+				KEY_Z,
+				KEY_X,
+				KEY_C,
+				KEY_V,
+				KEY_B,
+				KEY_N,
+				KEY_M,
+				KEY_COMMA,
+				KEY_PERIOD,
+				KEY_SLASH,
+				KEY_RIGHT_SHIFT, // 0x36
+				KEY_PRINTSCREEN,
+				KEY_ALT, // 0x38
+				KEY_SPACE,
+				KEY_CAPS_LOCK,
+				KEY_F1,
+				KEY_F2,
+				KEY_F3,
+				KEY_F4,
+				KEY_F5,
+				KEY_F6,
+				KEY_F7,
+				KEY_F8,
+				KEY_F9,
+				KEY_F10,
+				KEY_NUM_LOCK,
+				KEY_GUI, // Actually Hold... 0x48
+				KEY_BACKSLASH, // Also KEYPAD_7
+				KEY_TILDE, // Also KEYPAD_8
+				KEYPAD_9,
+				KEY_UP,
+				KEY_BACKSLASH, // Actually | and KEYPAD_4
+				KEYPAD_5,
+				KEYPAD_6,
+				KEY_RIGHT,
+				KEYPAD_1,
+				KEY_TILDE, // Actually ` and KEYPAD_2
+				KEYPAD_3,
+				KEYPAD_0,
+				KEY_DELETE,
+				KEY_PAUSE,
+				KEY_INSERT,
+				KEYPAD_PERIOD,
+				KEYPAD_ENTER,
+				KEY_HOME,
+				KEY_F11,
+				KEY_F12, // 0x5A
+};
+*/
+
+static uint8_t tandy1000_colemak[] = { 0,
+				KEY_ESC,
+				KEY_1,
+				KEY_2,
+				KEY_3,
+				KEY_4,
+				KEY_5,
+				KEY_6,
+				KEY_7,
+				KEY_8,
+				KEY_9,
+				KEY_0,
+				KEY_MINUS,
+				KEY_EQUAL,
+				KEY_BACKSPACE,
+				KEY_TAB,
+				KEY_Q,
+				KEY_W,
+				KEY_F,
+				KEY_P,
+				KEY_G,
+				KEY_J,
+				KEY_L,
+				KEY_U,
+				KEY_Y,
+				KEY_SEMICOLON,
+				KEY_LEFT_BRACE,
+				KEY_RIGHT_BRACE,
+				KEY_ENTER,
+				KEY_CTRL, // 0x1D
+				KEY_A,
+				KEY_R,
+				KEY_S,
+				KEY_T,
+				KEY_D,
+				KEY_H,
+				KEY_N,
+				KEY_E,
+				KEY_I,
+				KEY_O,
+				KEY_QUOTE,
+				KEY_UP,
+				KEY_LEFT_SHIFT, // 0x2A
+				KEY_LEFT,
+				KEY_Z,
+				KEY_X,
+				KEY_C,
+				KEY_V,
+				KEY_B,
+				KEY_K,
+				KEY_M,
+				KEY_COMMA,
+				KEY_PERIOD,
+				KEY_SLASH,
+				KEY_RIGHT_SHIFT, // 0x36
+				KEY_PRINTSCREEN,
+				KEY_ALT, // 0x38
+				KEY_SPACE,
+				0, //KEY_CAPS_LOCK,
+				KEY_F1,
+				KEY_F2,
+				KEY_F3,
+				KEY_F4,
+				KEY_F5,
+				KEY_F6,
+				KEY_F7,
+				KEY_F8,
+				KEY_F9,
+				KEY_F10,
+				0, //KEY_NUM_LOCK,
+				KEY_GUI, // Actually Hold... 0x48
+				KEY_BACKSLASH, // Also KEYPAD_7
+				KEY_TILDE, // Also KEYPAD_8
+				KEYPAD_9,
+				KEY_DOWN,
+				KEY_BACKSLASH, // Actually | and KEYPAD_4
+				KEYPAD_5,
+				KEYPAD_6,
+				KEY_RIGHT,
+				KEYPAD_1,
+				KEY_TILDE, // Actually ` and KEYPAD_2
+				KEYPAD_3,
+				KEYPAD_0,
+				KEY_DELETE,
+				KEY_PAUSE,
+				KEY_INSERT,
+				KEYPAD_PERIOD,
+				KEYPAD_ENTER,
+				KEY_HOME,
+				KEY_F11,
+				KEY_F12, // 0x5A
+};
+
+
+
+
+
+
+
 //static uint8_t    keypad_modifierMask[] = {};
-static uint8_t  keyboard_modifierMask[] = { 1, 17, 33, 49 };
+//static uint8_t  keyboard_modifierMask[] = { 1, 17, 33, 49 };
 //static uint8_t alternate_modifierMask[] = { 1, 17, 33, 49, 62 };
 
 // Default 1-indexed key mappings
@@ -61,7 +253,6 @@ static uint8_t keypadDefaultMap[] = { 0,
 				KEYPAD_0,
 				KEYPAD_PERIOD,
 				KEYPAD_PLUS };
-*/
 static uint8_t defaultMap[] = { 0,
 				KEY_GUI,
 				KEY_1,
@@ -126,6 +317,7 @@ static uint8_t defaultMap[] = { 0,
 				KEY_LEFT,
 				KEY_RIGHT,
 				KEY_SPACE };
+*/
 /*
 static uint8_t navigationMap[] = { 0,
 				KEY_GUI,

Macro/basic/macro.c

@@ -24,6 +24,7 @@
 // AVR Includes
 
 // Project Includes
+#include <led.h>
 #include <print.h>
 #include <scan_loop.h>
 #include <usb_com.h>
@@ -41,11 +42,17 @@
 
 // Given a sampling array, and the current number of detected keypress
 // Add as many keypresses from the sampling array to the USB key send array as possible.
-void keyPressDetection( uint8_t *keys, uint8_t *validKeys, uint8_t numberOfKeys, uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map )
+void keyPressDetection( uint8_t *keys, uint8_t numberOfKeys, uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map )
+//void keyPressDetection( uint8_t *keys, uint8_t numberOfKeys, uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map )
+{
+	USBKeys_Sent = 0;
+
+	for ( uint8_t key = 1; key < numberOfKeys + 1; key++ )
+	//for ( uint8_t key = 0; key < numberOfKeys + 1; key++ )
+	{
+		//if ( keys[key] & (1 << 7) )
+		if ( keys[key] )
 		{
-	for ( uint8_t key = 0; key < numberOfKeys + 1; key++ ) {
-		if ( keys[key] & (1 << 7) ) {
-			// TODO Debug Out
 			uint8_t modFound = 0;
 
 			// Determine if the key is a modifier
@@ -57,30 +64,35 @@ void keyPressDetection( uint8_t *keys, uint8_t *validKeys, uint8_t numberOfKeys,
 					break;
 				}
 			}
+
+			// Modifier, already done this loop
 			if ( modFound )
 				continue;
 
 			// Too many keys
-			if ( *validKeys >= USBKeys_MaxSize )
+			if ( USBKeys_Sent >= USBKeys_MaxSize )
+			{
+				info_print("USB Key limit reached");
+				errorLED( 1 );
 				break;
+			}
 
 			// Allow ignoring keys with 0's
 			if ( map[key] != 0 )
-				USBKeys_Array[(*validKeys)++] = map[key];
+				USBKeys_Array[USBKeys_Sent++] = map[key];
+
+			/*
+			char tmpStr[3];
+			hexToStr_op( USBKeys_Array[0], tmpStr, 2 );
+			warn_dPrint("Found key: 0x", tmpStr );
+			*/
 		}
 	}
 }
 
 void process_macros(void)
 {
-	// Layout Setup
-	uint8_t validKeys = 0;
-
-	uint8_t *keyboard_MODMASK = keyboard_modifierMask;
-	uint8_t  keyboard_NUMMODS = MODIFIERS_KEYBOARD;
-	uint8_t *keyboard_MAP     = defaultMap;
-
 	// Debounce Sampling Array to USB Data Array
-	keyPressDetection( KeyIndex_Array, &validKeys, KeyIndex_Size, keyboard_MODMASK, keyboard_NUMMODS, keyboard_MAP );
+	keyPressDetection( KeyIndex_Array, KeyIndex_Size, MODIFIER_MASK, sizeof(MODIFIER_MASK), KEYINDEX_MASK );
 }
 

Macro/basic/macro.h

@@ -31,7 +31,7 @@
 
 // ----- Functions -----
 
-void keyPressDetection( uint8_t *keys, uint8_t *validKeys, uint8_t numberOfKeys, uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map );
+void keyPressDetection( uint8_t *keys, uint8_t numberOfKeys, uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map );
 void process_macros(void);
 
 #endif

Scan/Tandy1000/scan_loop.c

@@ -0,0 +1,239 @@
+/* Copyright (C) 2011 by Jacob Alexander
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// ----- Includes -----
+
+// AVR Includes
+#include <avr/interrupt.h>
+
+// Project Includes
+#include <led.h>
+#include <print.h>
+
+// Local Includes
+#include "scan_loop.h"
+
+
+
+// ----- Defines -----
+
+// Pinout Defines
+#define CLK_READ  PIND
+#define CLK_PORT PORTD
+#define CLK_DDR   DDRD
+#define CLK_PIN      1
+
+#define DATA_READ  PIND
+#define DATA_PORT PORTD
+#define DATA_DDR   DDRD
+#define DATA_PIN      0
+
+#define INTR_PORT PORTD
+#define INTR_DDR   DDRD
+#define INTR_PIN      0
+
+
+
+// ----- Macros -----
+#define READ_CLK       CLK_READ &   (1 <<  CLK_PIN) ? 1 : 0
+#define READ_DATA     DATA_READ &   (1 << DATA_PIN) ? 0 : 1
+
+#define UNSET_INTR()  INTR_DDR &= ~(1 << INTR_PIN)
+#define   SET_INTR()  INTR_DDR |=  (1 << INTR_PIN)
+
+
+
+// ----- Variables -----
+
+uint8_t KeyIndex_Array[KEYBOARD_SIZE + 1];
+
+// Scan Code Retrieval Variables
+uint8_t inputData    = 0xFF;
+uint8_t packet_index = 0;
+
+
+
+// ----- Functions -----
+
+// Setup
+inline void scan_setup()
+{
+	// Setup inputs
+	CLK_DDR  &= ~(1 << CLK_PIN);
+	DATA_DDR &= ~(1 << DATA_PIN);
+
+	// Setup Pull-up's
+	CLK_PORT  &= ~(1 << CLK_PIN);  // (CLK)
+	DATA_PORT &= ~(1 << DATA_PIN); // (/DATA)
+
+	// Setup Keyboard Interrupt
+	INTR_DDR  &= ~(1 << INTR_PIN);
+	INTR_PORT &= ~(1 << INTR_PIN);
+
+	/* Interrupt Style (Not working fully)
+	cli();
+	// Setup interrupt on the CLK pin TODO Better defines
+	EICRA |= 0x03; // Rising Edge Interrupt
+	EIMSK |= (1 << INT0);
+
+	// Setup interrupt on the DATA pin TODO Better defines
+	EICRA |= 0x08; // Falling Edge Interrupt
+	EIMSK |= (1 << INT1);
+	sei();
+	*/
+}
+
+
+// Main Detection Loop
+inline uint8_t scan_loop()
+{
+	/*
+	// Packet Read
+	if ( packet_index == 8 )
+	{
+		// Disable Error LED, proper key found
+		errorLED( 0 );
+
+//#ifdef MAX_DEBUG
+		// Crazy Debug (Read the Scan Code)
+		char tmpStr[3];
+		hexToStr_op( inputData, tmpStr, 2 );
+		dPrintStrsNL( "Read Data: 0x", tmpStr );
+//#endif
+		// - Map the scan code to the index array -
+		// If the 8th bit is high, remove the keypress, else, add the keypress
+		// The lower 7 bits are the array index
+		KeyIndex_Array[(inputData & 0x7F)] = (inputData & 0x80) ? 0x00 : 0x80;
+
+		// Reset Containers
+		packet_index = 0;
+		inputData = 0xFF;
+	}
+	// Bad Packet
+	else if ( packet_index > 8 )
+	{
+		// Signal Error
+		errorLED( 1 );
+
+		char tmpStr[3];
+		int8ToStr( packet_index, tmpStr );
+		erro_dPrint( "Big packet? Mismatched... ", tmpStr );
+
+		packet_index = 0;
+		inputData = 0xFF;
+	}
+	*/
+
+	// Disable keyboard interrupt (does nothing if already off)
+	UNSET_INTR();
+
+	// Read the clock 8 times
+	if ( READ_CLK )
+	{
+		// Mis-read packet, set back to 0
+		if ( packet_index == -1 )
+			packet_index = 0;
+
+		// Append 1 bit of data
+		inputData &= ~(READ_DATA << packet_index);
+		packet_index++;
+
+		// 8 Bits have been read
+		if ( packet_index == 8 )
+		{
+			// Wait till clock edge falls
+			while ( READ_CLK );
+
+			// Sample both lines to make sure this is not a data value
+			//  and definitely the end of packet data blip
+			uint16_t badDataCounter = 0;
+			while ( !( READ_DATA ) && !( READ_CLK ) )
+					badDataCounter++;
+
+			if ( badDataCounter < 25 )
+			{
+//#ifdef MAX_DEBUG
+				// Crazy Debug (Read the Scan Code)
+				char tmpStr[3];
+				hexToStr_op( inputData, tmpStr, 2 );
+				dbug_dPrint( "Read Data: 0x", tmpStr );
+//#endif
+				// - Map the scan code to the index array -
+				// If the 8th bit is high, remove the keypress, else, add the keypress
+				// The lower 7 bits are the array index
+				KeyIndex_Array[(inputData & 0x7F)] = (inputData & 0x80) ? 0x00 : 0x80;
+			}
+			// Even though this is a mis-read packet, we still know what the value is
+			else
+			{
+				// Signal Error
+				errorLED( 1 );
+				char tmpStr[3];
+				hexToStr_op( inputData, tmpStr, 2 );
+				erro_dPrint( "Bad packet? Mismatched... 0x", tmpStr );
+			}
+
+			// Reset Containers
+			inputData = 0xFF;
+			packet_index = 0;
+
+			// Interrupt the keyboard, so we don't get packet pieces...
+			SET_INTR();
+
+			// Do not wait for next clock, let USB do it's thing (if desired)
+			return packet_index;
+		}
+
+		// Wait till clock edge falls
+		while ( READ_CLK );
+	}
+
+	// Interrupt keyboard if there is no pending packet
+	SET_INTR();
+
+	return packet_index;
+}
+
+// Detection interrupt, signalled by a clock pulse from CLK_PIN
+ISR(INT0_vect)
+{
+	//cli(); // Disable Interrupts
+
+	// Append 1 bit of data
+	//inputData &= ~(READ_DATA << packet_index);
+	packet_index++;
+
+	//sei(); // Re-enable Interrupts
+}
+
+// Data Detected
+ISR(INT1_vect)
+{
+	// Append 1 bit of data
+	inputData &= ~(1 << packet_index);
+	packet_index++;
+
+	// Disable Clk Signal (Not needed if there's a data signal)
+	EIFR |= (1 << INTF0);
+}
+
+
+

Scan/Tandy1000/scan_loop.h

@@ -0,0 +1,55 @@
+/* Copyright (C) 2011 by Jacob Alexander
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef __SCAN_LOOP_H
+#define __SCAN_LOOP_H
+
+// ----- Includes -----
+
+// Compiler Includes
+#include <stdint.h>
+
+// Local Includes
+
+
+
+// ----- Defines -----
+
+#define KEYBOARD_SIZE 0x5A // 90 - Size of the array space for the keyboardr(max index)
+
+
+
+// ----- Variables -----
+
+// NOTE: Highest Bit: Valid keypress (0x80 is valid keypress)
+//        Other Bits: Pressed state sample counter
+extern              uint8_t KeyIndex_Array [KEYBOARD_SIZE + 1];
+       static const uint8_t KeyIndex_Size = KEYBOARD_SIZE;
+
+
+
+// ----- Functions -----
+
+void scan_setup( void );
+uint8_t scan_loop( void );
+
+#endif // __SCAN_LOOP_H
+

Scan/Tandy1000/setup.cmake

@@ -0,0 +1,29 @@
+###| CMake Kiibohd Controller Scan Module |###
+#
+# Written by Jacob Alexander in 2011 for the Kiibohd Controller
+#
+# Released into the Public Domain
+#
+###
+
+
+###
+# Module C files
+#
+
+set( SCAN_SRCS
+	scan_loop.c
+)
+
+
+###
+# Module Specific Options
+#
+add_definitions( -I${HEAD_DIR}/Keymap )
+
+#| Keymap Settings
+add_definitions(
+	-DMODIFIER_MASK=tandy1000_modifierMask
+	-DKEYINDEX_MASK=tandy1000_colemak
+)
+

Scan/matrix/scan_loop.c

@@ -55,11 +55,15 @@ uint8_t scan_count = 0;
 
 // ----- Functions -----
 
+// Setup
+void scan_setup()
+{
+	//matrix_pinSetup( matrix_pinout );
+}
+
 // Main Detection Loop
 void scan_loop()
 {
-	//matrix_pinSetup( matrix_pinout );
-
 	//matrix_scan( matrix_pinout, keyboardDetectArray );
 
 	// Check count to see if the sample threshold may have been reached, otherwise collect more data

Scan/matrix/scan_loop.h

@@ -31,6 +31,7 @@
 
 // ----- Functions -----
 
+void scan_setup( void );
 void scan_loop( void );
 
 #endif // __SCAN_LOOP_H

USB/pjrc/usb_com.c

@@ -55,7 +55,7 @@ volatile uint8_t USBKeys_LEDs = 0;
 // ----- Functions -----
 
 // USB Module Setup
-void usb_setup(void)
+inline void usb_setup(void)
 {
 	// Initialize the USB, and then wait for the host to set configuration.
 	// If the Teensy is powered without a PC connected to the USB port,
@@ -70,7 +70,7 @@ void usb_setup(void)
 
 
 // USB Data Send
-void usb_send(void)
+inline void usb_send(void)
 {
 		// TODO undo potentially old keys
 		for ( uint8_t c = USBKeys_Sent; c < USBKeys_MaxSize; c++ )

main.c

@@ -102,10 +102,16 @@ int main(void)
 	uint8_t ledTimer = 15; // Enable LED for a short time
 	while ( 1 )
 	{
+		// Setup the scanning module
+		scan_setup();
+
 		while ( 1 )
 		{
 			// Acquire Key Indices
-			scan_loop();
+			// Loop continuously until scan_loop returns 0
+			cli();
+			while ( scan_loop() );
+			sei();
 
 			// Send keypresses over USB if the ISR has signalled that it's time
 			if ( !sendKeypresses )
@@ -122,6 +128,9 @@ int main(void)
 
 			// Indicate Error, if valid
 			errorLED( ledTimer );
+
+			if ( ledTimer > 0 )
+				ledTimer--;
 		}
 
 		// Loop should never get here (indicate error)

setup.cmake

@@ -20,7 +20,7 @@
 #| Please the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
 
 ##| Deals with acquiring the keypress information and turning it into a key index
-set(  ScanModule  "matrix" )
+set(  ScanModule  "Tandy1000" )
 
 ##| Uses the key index and potentially applies special conditions to it, mapping it to a usb key code
 set( MacroModule  "basic"  )
@@ -104,8 +104,12 @@ PathPrepend( DEBUG_SRCS ${DebugModulePath} ${DEBUG_SRCS} )
 
 
 #| Print list of all module sources
-message( STATUS "Detected Scan Module Source Files:  \n${SCAN_SRCS}")
+message( STATUS "Detected Scan Module Source Files:" )
-message( STATUS "Detected Macro Module Source Files:\n${MACRO_SRCS}")
+message( "${SCAN_SRCS}" )
-message( STATUS "Detected USB Module Source Files:    \n${USB_SRCS}")
+message( STATUS "Detected Macro Module Source Files:" )
-message( STATUS "Detected Debug Module Source Files:\n${DEBUG_SRCS}")
+message( "${MACRO_SRCS}" )
+message( STATUS "Detected USB Module Source Files:" )
+message( "${USB_SRCS}" )
+message( STATUS "Detected Debug Module Source Files:" )
+message( "${DEBUG_SRCS}" )