- Tested with the AVR builds - Partially tested with basic ARM test buildssimple
@@ -1,6 +1,6 @@ | |||
###| CMAKE Kiibohd Controller |### | |||
# | |||
# Written by Jacob Alexander in 2011 for the Kiibohd Controller | |||
# Jacob Alexander 2011-2013 | |||
# Due to this file's usefulness: | |||
# | |||
# Released into the Public Domain | |||
@@ -11,15 +11,30 @@ | |||
set( CMAKE_LEGACY_CYGWIN_WIN32 0 ) | |||
set( CMAKE_USE_RELATIVE_PATHS 1 ) | |||
#| Add Dependency Macro | |||
include( AddFileDependencies ) | |||
#| Set the Compilers (must be set first) | |||
include( CMakeForceCompiler ) | |||
cmake_force_c_compiler ( avr-gcc AVRCCompiler ) | |||
cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler ) | |||
#| Add Dependency Macro | |||
include( AddFileDependencies ) | |||
### | |||
# Compiler Family | |||
# | |||
#| Specify the compiler family to use | |||
#| Currently only supports AVR and ARM | |||
#| "avr" # Teensy 1.0 | |||
#| "avr" # Teensy 2.0 | |||
#| "avr" # Teensy++ 1.0 | |||
#| "avr" # Teensy++ 2.0 | |||
#| "arm" # Teensy 3.0 | |||
#set( COMPILER_FAMILY "arm" ) | |||
set( COMPILER_FAMILY "avr" ) | |||
#| Load the compiler family specific configurations | |||
include( ${COMPILER_FAMILY}.cmake ) | |||
### | |||
@@ -49,6 +64,7 @@ cmake_minimum_required( VERSION 2.8 ) | |||
include( setup.cmake ) | |||
set( SRCS | |||
main.c | |||
${COMPILER_SRCS} | |||
${SCAN_SRCS} | |||
${MACRO_SRCS} | |||
${USB_SRCS} | |||
@@ -57,89 +73,6 @@ set( SRCS | |||
### | |||
# Atmel Defines and Linker Options | |||
# | |||
#| MCU Name | |||
#| You _MUST_ set this to match the board you are using | |||
#| type "make clean" after changing this, so all files will be rebuilt | |||
#| | |||
#| "at90usb162" # Teensy 1.0 | |||
#| "atmega32u4" # Teensy 2.0 | |||
#| "at90usb646" # Teensy++ 1.0 | |||
#| "at90usb1286" # Teensy++ 2.0 | |||
#set( MCU "atmega32u4" ) | |||
set( MCU "at90usb1286" ) | |||
#| Compiler flag to set the C Standard level. | |||
#| c89 = "ANSI" C | |||
#| gnu89 = c89 plus GCC extensions | |||
#| c99 = ISO C99 standard (not yet fully implemented) | |||
#| gnu99 = c99 plus GCC extensions | |||
set( CSTANDARD "-std=gnu99" ) | |||
#| Warning Options | |||
#| -Wall...: warning level | |||
set( WARN "-Wall -Wstrict-prototypes" ) | |||
#| Tuning Options | |||
#| -f...: tuning, see GCC manual and avr-libc documentation | |||
set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" ) | |||
#| Optimization level, can be [0, 1, 2, 3, s]. | |||
#| 0 = turn off optimization. s = optimize for size. | |||
#| (Note: 3 is not always the best optimization level. See avr-libc FAQ.) | |||
set( OPT "s" ) | |||
#| Output Format | |||
#| srec, ihex, binary | |||
set( FORMAT "ihex" ) | |||
#| Processor frequency. | |||
#| Normally the first thing your program should do is set the clock prescaler, | |||
#| so your program will run at the correct speed. You should also set this | |||
#| variable to same clock speed. The _delay_ms() macro uses this, and many | |||
#| examples use this variable to calculate timings. Do not add a "UL" here. | |||
set( F_CPU "16000000" ) | |||
#| Dependency Files | |||
#| Compiler flags to generate dependency files. | |||
set( GENDEPFLAGS "-MMD -MP" ) | |||
#| Listing file | |||
set( TARGET_LST ${TARGET}.lst ) | |||
#| Compiler Flags | |||
add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" ) | |||
#| Linker Flags | |||
set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" ) | |||
#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...) | |||
set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature ) | |||
#| Eep Flags | |||
set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} ) | |||
#| Lss Flags | |||
set( LSS_FLAGS -h -S -z ) | |||
### | |||
# Build Targets | |||
# | |||
@@ -159,23 +92,15 @@ set_target_properties( ${TARGET_ELF} PROPERTIES | |||
#| Convert the .ELF into a .HEX to load onto the Teensy | |||
set( TARGET_HEX ${TARGET}.hex ) | |||
add_custom_command( TARGET ${TARGET_ELF} POST_BUILD | |||
COMMAND avr-objcopy ${HEX_FLAGS} ${TARGET_ELF} ${TARGET_HEX} | |||
COMMAND ${OBJCOPY} ${HEX_FLAGS} ${TARGET_ELF} ${TARGET_HEX} | |||
COMMENT "Creating load file for Flash: ${TARGET_HEX}" | |||
) | |||
#| Convert the .ELF into a .EEP | |||
set( TARGET_EEP ${TARGET}.eep ) | |||
add_custom_command( TARGET ${TARGET_ELF} POST_BUILD | |||
COMMAND avr-objcopy ${EEP_FLAGS} ${TARGET_ELF} ${TARGET_EEP} | |||
COMMENT "Creating load file for EEPROM: ${TARGET_EEP}" | |||
) | |||
#| Generate the Extended .LSS | |||
set( TARGET_LSS ${TARGET}.lss ) | |||
add_custom_command( TARGET ${TARGET_ELF} POST_BUILD | |||
COMMAND avr-objdump ${LSS_FLAGS} ${TARGET_ELF} > ${TARGET_LSS} | |||
COMMAND ${OBJDUMP} ${LSS_FLAGS} ${TARGET_ELF} > ${TARGET_LSS} | |||
COMMENT "Creating Extended Listing: ${TARGET_LSS}" | |||
) | |||
@@ -183,7 +108,7 @@ add_custom_command( TARGET ${TARGET_ELF} POST_BUILD | |||
#| Generate the Symbol Table .SYM | |||
set( TARGET_SYM ${TARGET}.sym ) | |||
add_custom_command( TARGET ${TARGET_ELF} POST_BUILD | |||
COMMAND avr-nm -n ${TARGET_ELF} > ${TARGET_SYM} | |||
COMMAND ${NM} -n ${TARGET_ELF} > ${TARGET_SYM} | |||
COMMENT "Creating Symbol Table: ${TARGET_SYM}" | |||
) | |||
@@ -194,7 +119,7 @@ add_custom_command( TARGET ${TARGET_ELF} POST_BUILD | |||
# | |||
#| After Changes Size Information | |||
add_custom_target( SizeAfter ALL avr-size --target=${FORMAT} ${TARGET_HEX} ${TARGET_ELF} | |||
add_custom_target( SizeAfter ALL ${SIZE} --target=${FORMAT} ${TARGET_HEX} ${TARGET_ELF} | |||
DEPENDS ${TARGET_ELF} | |||
COMMENT "Size after generation:" | |||
) |
@@ -0,0 +1,111 @@ | |||
###| CMAKE Kiibohd Controller |### | |||
# | |||
# Jacob Alexander 2011-2013 | |||
# Due to this file's usefulness: | |||
# | |||
# Released into the Public Domain | |||
# | |||
# Freescale ARM CMake Build Configuration | |||
# | |||
### | |||
#| Set the Compilers (must be set first) | |||
include( CMakeForceCompiler ) | |||
cmake_force_c_compiler ( arm-none-eabi-gcc AVRCCompiler ) | |||
cmake_force_cxx_compiler( arm-none-eabi-g++ AVRCxxCompiler ) | |||
#| Compiler Binaries | |||
set( OBJCOPY "arm-none-eabi-objcopy" ) | |||
set( OBJDUMP "arm-none-eabi-objdump" ) | |||
set( NM "arm-none-eabi-nm" ) | |||
set( SIZE "arm-none-eabi-size" ) | |||
### | |||
# ARM Defines and Linker Options | |||
# | |||
#| Chip Name (Linker) | |||
#| You _MUST_ set this to match the board you are using | |||
#| type "make clean" after changing this, so all files will be rebuilt | |||
#| | |||
#| "mk20dx128" # Teensy 3.0 | |||
set( CHIP "mk20dx128" ) | |||
#| CPU Type | |||
#| You _MUST_ set this to match the board you are using | |||
#| type "make clean" after changing this, so all files will be rebuilt | |||
#| | |||
#| "cortex-m4" # Teensy 3.0 | |||
set( CPU "cortex-m4" ) | |||
#| Extra Compiler Sources | |||
#| Mostly for convenience functions like interrupt handlers | |||
set( COMPILER_SRCS | |||
Lib/${CHIP}.c | |||
) | |||
#| Compiler flag to set the C Standard level. | |||
#| c89 = "ANSI" C | |||
#| gnu89 = c89 plus GCC extensions | |||
#| c99 = ISO C99 standard (not yet fully implemented) | |||
#| gnu99 = c99 plus GCC extensions | |||
set( CSTANDARD "-std=gnu99" ) | |||
#| Warning Options | |||
#| -Wall...: warning level | |||
set( WARN "-Wall -g" ) | |||
#| Tuning Options | |||
#| -f...: tuning, see GCC manual | |||
set( TUNING "-mthumb -nostdlib" ) | |||
#| Optimization level, can be [0, 1, 2, 3, s]. | |||
#| 0 = turn off optimization. s = optimize for size. | |||
#| (Note: 3 is not always the best optimization level.) | |||
set( OPT "s" ) | |||
#| Output Format | |||
#| srec, ihex, binary | |||
set( FORMAT "ihex" ) | |||
#| Processor frequency. | |||
#| Normally the first thing your program should do is set the clock prescaler, | |||
#| so your program will run at the correct speed. You should also set this | |||
#| variable to same clock speed. The _delay_ms() macro uses this, and many | |||
#| examples use this variable to calculate timings. Do not add a "UL" here. | |||
set( F_CPU "48000000" ) | |||
#| Dependency Files | |||
#| Compiler flags to generate dependency files. | |||
set( GENDEPFLAGS "-MMD" ) | |||
#| Compiler Flags | |||
add_definitions( "-mcpu=${CPU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" ) | |||
#| Linker Flags | |||
set( LINKER_FLAGS "-mcpu=${CPU} -Wl,-Map=${TARGET}.map,--cref -Wl,--gc-sections -mthumb -T${CMAKE_CURRENT_SOURCE_DIR}/Lib/${CHIP}.ld" ) | |||
#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...) | |||
set( HEX_FLAGS -O ${FORMAT} -R .eeprom ) | |||
#| Lss Flags | |||
set( LSS_FLAGS -h -S -z ) | |||
@@ -0,0 +1,111 @@ | |||
###| CMAKE Kiibohd Controller |### | |||
# | |||
# Jacob Alexander 2011-2013 | |||
# Due to this file's usefulness: | |||
# | |||
# Released into the Public Domain | |||
# | |||
# avr-gcc CMake Build Configuration | |||
# | |||
### | |||
#| Set the Compilers (must be set first) | |||
include( CMakeForceCompiler ) | |||
cmake_force_c_compiler ( avr-gcc AVRCCompiler ) | |||
cmake_force_cxx_compiler( avr-g++ AVRCxxCompiler ) | |||
#| Compiler Binaries | |||
set( OBJCOPY "avr-objcopy" ) | |||
set( OBJDUMP "avr-objdump" ) | |||
set( NM "avr-nm" ) | |||
set( SIZE "avr-size" ) | |||
### | |||
# Atmel Defines and Linker Options | |||
# | |||
#| MCU Name | |||
#| You _MUST_ set this to match the board you are using | |||
#| type "make clean" after changing this, so all files will be rebuilt | |||
#| | |||
#| "at90usb162" # Teensy 1.0 | |||
#| "atmega32u4" # Teensy 2.0 | |||
#| "at90usb646" # Teensy++ 1.0 | |||
#| "at90usb1286" # Teensy++ 2.0 | |||
#set( MCU "atmega32u4" ) | |||
set( MCU "at90usb1286" ) | |||
#| Extra Compiler Sources | |||
#| Mostly for convenience functions like interrupt handlers | |||
set( COMPILER_SRCS | |||
# XXX Not needed for avr-gcc | |||
) | |||
#| Compiler flag to set the C Standard level. | |||
#| c89 = "ANSI" C | |||
#| gnu89 = c89 plus GCC extensions | |||
#| c99 = ISO C99 standard (not yet fully implemented) | |||
#| gnu99 = c99 plus GCC extensions | |||
set( CSTANDARD "-std=gnu99" ) | |||
#| Warning Options | |||
#| -Wall...: warning level | |||
set( WARN "-Wall -Wstrict-prototypes" ) | |||
#| Tuning Options | |||
#| -f...: tuning, see GCC manual and avr-libc documentation | |||
set( TUNING "-funsigned-char -funsigned-bitfields -ffunction-sections -fpack-struct -fshort-enums" ) | |||
#| Optimization level, can be [0, 1, 2, 3, s]. | |||
#| 0 = turn off optimization. s = optimize for size. | |||
#| (Note: 3 is not always the best optimization level. See avr-libc FAQ.) | |||
set( OPT "s" ) | |||
#| Output Format | |||
#| srec, ihex, binary | |||
set( FORMAT "ihex" ) | |||
#| Processor frequency. | |||
#| Normally the first thing your program should do is set the clock prescaler, | |||
#| so your program will run at the correct speed. You should also set this | |||
#| variable to same clock speed. The _delay_ms() macro uses this, and many | |||
#| examples use this variable to calculate timings. Do not add a "UL" here. | |||
set( F_CPU "16000000" ) | |||
#| Dependency Files | |||
#| Compiler flags to generate dependency files. | |||
set( GENDEPFLAGS "-MMD -MP" ) | |||
#| Compiler Flags | |||
add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" ) | |||
#| Linker Flags | |||
set( LINKER_FLAGS "-mmcu=${MCU} -Wl,-Map=${TARGET}.map,--cref -Wl,--relax -Wl,--gc-sections" ) | |||
#| Hex Flags (XXX, CMake seems to have issues if you quote the arguments for the custom commands...) | |||
set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature ) | |||
#| Eep Flags | |||
set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} ) | |||
#| Lss Flags | |||
set( LSS_FLAGS -h -S -z ) | |||
@@ -40,7 +40,7 @@ main() { | |||
cmake -DScanModuleOverride=$module ../.. && make || let failCount++ | |||
# Cleanup, for the next build | |||
cd - | |||
cd - > /dev/null | |||
done | |||
totalModules=$(echo $scanModules | wc -w) |
@@ -37,9 +37,9 @@ set( DebugModule "full" ) | |||
### | |||
# Module Overrides (Used in the buildall.bash script) | |||
# | |||
if ( EXISTS ${PROJECT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) | |||
if ( ( DEFINED ${ScanModuleOverride} ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) ) | |||
set( ScanModule ${ScanModuleOverride} ) | |||
endif ( EXISTS ${PROJECT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) | |||
endif ( ( DEFINED ${ScanModuleOverride} ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) ) | |||
@@ -52,7 +52,7 @@ set( USBModulePath "USB/${USBModule}" ) | |||
set( DebugModulePath "Debug/${DebugModule}" ) | |||
#| Top-level directory adjustment | |||
set( HEAD_DIR "${PROJECT_SOURCE_DIR}" ) | |||
set( HEAD_DIR "${CMAKE_CURRENT_SOURCE_DIR}" ) | |||