Arquivado
1
0

Adding connection type list

Esse commit está contido em:
Jacob Alexander 2015-07-25 14:54:36 -07:00
commit b6e2f0ebf0
2 arquivos alterados com 89 adições e 9 exclusões

Ver arquivo

@ -188,6 +188,7 @@ case uartNum: \
// CLI Functions
void cliFunc_connectCmd ( char *args );
void cliFunc_connectIdl ( char *args );
void cliFunc_connectLst ( char *args );
void cliFunc_connectMst ( char *args );
void cliFunc_connectRst ( char *args );
void cliFunc_connectSts ( char *args );
@ -199,12 +200,14 @@ void cliFunc_connectSts ( char *args );
// Connect Module command dictionary
CLIDict_Entry( connectCmd, "Sends a command via UART Connect, first arg is which uart, next arg is the command, rest are the arguments." );
CLIDict_Entry( connectIdl, "Sends N number of Idle commands, 2 is the default value, and should be sufficient in most cases." );
CLIDict_Entry( connectLst, "Lists available UARTConnect commands and index id" );
CLIDict_Entry( connectMst, "Sets the device as master. Use argument of s to set as slave." );
CLIDict_Entry( connectRst, "Resets both Rx and Tx connect buffers and state variables." );
CLIDict_Entry( connectSts, "UARTConnect status." );
CLIDict_Def( uartConnectCLIDict, "UARTConnect Module Commands" ) = {
CLIDict_Item( connectCmd ),
CLIDict_Item( connectIdl ),
CLIDict_Item( connectLst ),
CLIDict_Item( connectMst ),
CLIDict_Item( connectRst ),
CLIDict_Item( connectSts ),
@ -885,6 +888,20 @@ void cliFunc_connectCmd( char* args )
break;
}
case Animation:
break;
case RemoteCapability:
// TODO
break;
case RemoteOutput:
// TODO
break;
case RemoteInput:
// TODO
break;
default:
break;
}
@ -909,6 +926,31 @@ void cliFunc_connectIdl( char* args )
Connect_send_Idle( count );
}
void cliFunc_connectLst( char* args )
{
const char *Command_strs[] = {
"CableCheck",
"IdRequest",
"IdEnumeration",
"IdReport",
"ScanCode",
"Animation",
"RemoteCapability",
"RemoteOutput",
"RemoteInput",
};
print( NL );
info_msg("List of UARTConnect commands");
for ( uint8_t cmd = 0; cmd < Command_TOP; cmd++ )
{
print( NL );
printInt8( cmd );
print(" - ");
dPrint( (char*)Command_strs[ cmd ] );
}
}
void cliFunc_connectMst( char* args )
{
// Parse number from argument
@ -944,7 +986,8 @@ void cliFunc_connectRst( char* args )
info_msg("Resetting UARTConnect state...");
Connect_reset();
// TODO - Argument for re-sync
// Reset node id
Connect_id = 0xFF;
}
void cliFunc_connectSts( char* args )

Ver arquivo

@ -27,12 +27,20 @@
// Functions
typedef enum Command {
CableCheck = 0, // Comm check
IdRequest = 1, // Slave initialization (request id from master)
IdEnumeration = 2, // Slave initialization (begin enumeration from master)
IdReport = 3, // Slave initialization complete, report id to master
ScanCode = 4, // ScanCode event status change
Animation = 5, // Master trigger animation event (same command is sent back to master when ready)
CableCheck, // Comm check
IdRequest, // Slave initialization (request id from master)
IdEnumeration, // Slave initialization (begin enumeration from master)
IdReport, // Slave initialization complete, report id to master
ScanCode, // ScanCode event status change
Animation, // Master trigger animation event (same command is sent back to master when ready)
RemoteCapability, // Activate a capability on the given node
RemoteOutput, // Remote debug output from a given node
RemoteInput, // Remote command to send to a given node's debug cli
Command_TOP, // Enum bounds
} Command;
// UART Rx/Tx Status
@ -71,7 +79,6 @@ typedef struct IdRequestCommand {
// Id Enumeration Command
// Issued by the master whenever an Id Request is received
// XXX Future work may include an "external capabilities" list in this command
typedef struct IdEnumerationCommand {
Command command;
uint8_t id;
@ -79,7 +86,6 @@ typedef struct IdEnumerationCommand {
// Id Report Command
// Issued by each slave to the master when assigned an Id
// XXX Future work will include an "external capabilities" list in this command
typedef struct IdReportCommand {
Command command;
uint8_t id;
@ -109,6 +115,37 @@ typedef struct AnimationCommand {
uint8_t firstParam[0];
} AnimationCommand;
// Remote Capability Command
// Initiated by the master to trigger a capability on a given node
// RemoteOutput is enabled while capability is activated
typedef struct RemoteCapabilityCommand {
Command command;
uint8_t id;
Capability capability;
uint8_t numArgs;
uint8_t firstArg[0];
} RemoteCapabilityCommand;
// Remote Output Command
// Sends debug output to the master node
// Uses print command redirection to generate each command message
typedef struct RemoteOutputCommand {
Command command;
uint8_t id;
uint8_t length;
uint8_t firstChar[0];
} RemoteOutputCommand;
// Remote Input Command
// Sends debug input to given node (usually from master)
// Uses debug cli to execute command and sends all output using Remote Output Command
typedef struct RemoteInputCommand {
Command command;
uint8_t id;
uint8_t length;
uint8_t firstChar[0];
} RemoteInputCommand;
// ----- Functions -----