- Changing header file ifndef define to pragma once's
- Removed duplicate output_com.h's

- Interrupt vector table position fix (affected everything in the firmware)
- Added fault debug messages
- Fixed usbMuxUart

- Required for 0.3b update of the KLL compiler.

Not working yet...

Forgot to pull some files. Fixed those up too.

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

- Ignoring (which is done by default)
- Device, Interface and Endpoint variants

- CLEAR_FEATURE unset is currently causing the keyboarod to freeze
- Though not ideal, it seems harmless to ignore this USB Control Packet
- Tested working on a Mac Mini (Yosemite)

- Removing (currently) redundant usbMuxUart capabilities.kll file
- Issues were due to the recent AddModule cmake function addition

fixes #15

- Displays all of the bytes sent via USB
- Different display mode for NKRO and Boot modes

- Currently actual detection commented out due to issues

- Added AddModule CMake function which simplifies specifying module requirements

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

- Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX
- NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time
  (due to 8.1 bug in the HID spec)

- Modifier byte was being cleared after each send (needed for Boot Mode only)

- Fixed descriptor to not include USB Code 156 (Clear)
- This USB Code affects repeating Delete

- OSX doesn't properly follow the spec when it comes to padding bits (when using bitfields)
- Everything seems to work when I don't use them
- NKRO tested working on OSX

- Also updating usbMuxUart header with most recent keyboard defines

- Tested both with Boot and NKRO modes

- Was causing lock-ups until the serial port was read
- Also checking each of the NKRO key types in each send loop

- It's possible to get even more, but this is probably as far as I'll go
- PROGMEM is really annoying to use, and makes the code look like ass
- Now the Teensy 2++ should have enough RAM to use PartialMap easily

- Missing a byte in the array

- Thanks hasu for pointing it out
- Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)

- 128 bytes is invalid for USB 2.0 Full-Speed (max 64 bytes)

- When changing the mode, a key buffer flush is required (might confuse the OS temporarily)

- Setting NKRO mode as default (up to bios to disable)

- Added NKRO descriptor
- Added NKRO HID descriptor
- Updated boot HID descriptor
- Fixed many bugs with the pjrc ARM usb stack (with USB HID)

- Easier to debug USB initialization

- Missing device qualifier descriptor
- Missing USB Debug descriptor (used by lsusb)

- Added fake capability for compilation

- Changing main device type to HID (0x03)

- API changes from the AVR NKRO support

- NKRO for USB Codes 4 to 164, 176 to 221 and modifiers
- Added System Control support codes 129 to 183
- Added Consumer Control support codes 32 to 668

- Only send USB events when something changes (rather than every ms)

- Still working on USB NKRO

- Automatically downloads the kll compiler if not found
- Added capability files to each of the module that currently have them
- Split modules.cmake so kll.cmake could influence build targets (also needs info from modules.cmake)
- Updated .gitignore for kll compiler directory
- Added documentation on how to manipulate layouts using CMakeLists.txt
- Cleanup of old layout files

- Layers were not disabling because function was only called on press/hold
- Disabled layer shift function on key hold
- Fixed the press/hold/release states for other layer capabilities and USB code send

- CLI now works with hex or decimal numbers
- Hex requires 0x (technically just x would work too)

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module