Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Scan/MDErgo1
Jacob Alexander 46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
..
defaultMap.kll Working support for Interconnect 2015-08-15 21:53:59 -07:00
led_conf.h Initial commit of MDErgo1 2015-07-25 15:06:19 -07:00
leftHand.kll Fixing default ErgoDox layout and adding FlashMode button 2015-08-21 19:43:45 -07:00
leftThenRight.kll Single MDErgo1 layout used for KiiConf initial layout setup 2015-09-14 00:48:48 -07:00
matrix.h Initial commit of MDErgo1 2015-07-25 15:06:19 -07:00
pinout Initial commit of MDErgo1 2015-07-25 15:06:19 -07:00
rightHand.kll Fixing default ErgoDox layout and adding FlashMode button 2015-08-21 19:43:45 -07:00
scan_loop.c Adding dynamic USB power support 2016-02-21 19:56:52 -08:00
scan_loop.h Adding dynamic USB power support 2016-02-21 19:56:52 -08:00
setup.cmake Initial commit of MDErgo1 2015-07-25 15:06:19 -07:00
slave1.kll Adding preliminary MDErgo keymap 2015-08-06 00:36:37 -07:00