keybrd library is an open source library for creating custom-keyboard firmware.
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.
|
123456789101112131415161718192021 |
- #ifndef LED_H
- #define LED_H
-
- /* LED is an abstract base class
- Each LED object is an IC pin that is used to power an LED on and off.
-
- Connect the LED in series with the resistor:
- Calculate current-limiting-resistor value (100 Ohms to 10k Ohms will work with 5 volts)
- R = (Vs - Vf) / If
- http://www.digikey.com/en/resources/conversion-calculators/conversion-calculator-led-series-resistor
- Connect the LED's anode (the longer lead) to the AVR output pin (+)
- Connect the LED's cathode to ground (-)
- Never connect a LED directly from ground to power. Doing so would destroy the LED.
- */
- class LED
- {
- public:
- virtual void on()=0;
- virtual void off()=0;
- };
- #endif
|