di0ib/keybrd
Archived
1
0
Fork 0
Code Releases Activity

document

Browse Source
This commit is contained in:
wolfv6 2016-11-16 18:56:37 -07:00
parent e5944bee57
commit 09b3e8ceb7
5 changed files with 31 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
doc/CHANGELOG.md
View File

@ -6,6 +6,27 @@ This project adheres to [Semantic Versioning 2.0.0](http://semver.org/).
keybrd version 0.x.x is for initial development.
keybrd version 1.0.0 will be released when the public API is stable.
0.6.4 (2016-11-16)
------------------
* Enhancements
* add Port_MCP23018
* add Port_MCP23S18
* add Port_ShiftRegs
* add PortWriteInterface
* add add LED_PortOpenDrain
* add examples/IOE_PCA9655E_development/
* rename strobeOn to activeState
* move strobe logic from Port_*::write() to Scanner_IOE::scan()
* Backward incompatible changes
* rename print_microseconds_per_scan() to printMicrosecondsPerScan()
* rename print_scans_per_second() to printScansPerSecond()
* rename Scanner_ShiftRegsPISOSingleRow to Scanner_ShiftRegsRead
* rename Scanner_ShiftRegsPISOMultiRow to Scanner_ShiftRegsReadStrobed
* in Scanner_ShiftRegsReadStrobed, reverse slaveSelect HIGH/LOW for SPI compatible tri-state
* in Port_MCP23S17, add slaveSelect to constructor parameter
* in Port_*, replace write() with writeHigh() and writeLow()
0.6.3 (2016-10-06)
------------------
* Enhancements

2
examples/IOE_PCA9655E_development/README.md
View File

@ -1,4 +1,4 @@
The series of sketches in this folder where used to develope the Port_PCA9655E class.
The series of sketches in this folder where used to develop the Port_PCA9655E class in stages.
The folder numbers are ordered from fundamental to practical.
Each sketch was tested on a breadboard. Breadboards hold:

4
src/Port_MCP23017.cpp
View File

@ -25,7 +25,7 @@ void Port_MCP23017::begin(const uint8_t activeState)
}
else //if active high
{
pullUp = 0; //0=pull-up disabled (for external pull-down resistors)
pullUp = 0; //0=pull-up disabled (external pull-down resistors)
}
Wire.beginTransmission(deviceAddr);
@ -72,7 +72,7 @@ uint8_t Port_MCP23017::read()
{
Wire.beginTransmission(deviceAddr);
Wire.write(portNum + 0x12); //GPIO
Wire.endTransmission(false); //MCP23017 needs false to send a restart ??todo really?
Wire.endTransmission(false); //MCP23017 needs false to send a restart
Wire.requestFrom(deviceAddr, 1u); //request one byte from input port

4
tutorials/keybrd_5b_LED_on_IOE/keybrd_5b_LED_on_IOE.ino
View File

@ -47,7 +47,7 @@ LED_uC LED_capsLck(21);
// --------------- RIGHT SCANNER ---------------
const uint8_t IOE_ADDR = 0x20; //MCP23S17 address, all 3 ADDR pins are grounded
const uint8_t slaveSelect = 10;
const uint8_t slaveSelect = 10; //Arduino-pin number connected to MCP23S17 CS or SS
Port_MCP23S17 portA(slaveSelect , IOE_ADDR, 0, 1<<0 | 1<<1 ); //for read
Port_MCP23S17 portB(slaveSelect , IOE_ADDR, 1, 0); //for strobe
@ -136,7 +136,7 @@ so that scanner's ports can turn on LayerState_LED's default-layer LED.
void setup()
{
scanner_R.begin();
layerState.begin(); //todo call LayerState_LED::begin() after Scanner_IOE::begin()
layerState.begin(); //call LayerState_LED::begin() after Scanner_IOE::begin()
}
void loop()

4
tutorials/tutorial_10_writing_IOE_port_classes.md
View File

@ -19,7 +19,9 @@ Steps to writing a new port class:
5. Study other keybrd port classes.
* SPI I/O expander port classes: Port_MCP23S17
* I2C I/O expander port classes: Port_PCA9655E
6. Write the port classes for your I/O expander. Debugging I/O expander code is hard because
6. Write the port classes for your I/O expander.
* [Example](../examples/IOE_PCA9655E_development/) shows how Port_PCA9655E was developed in stages, from fundamental to practical
* Debugging I/O expander code is hard because
SPI or I2C protocol, expander configuration, and expander commands.
<br>