Archiviert
1
0

rename to rowEnd, document

Dieser Commit ist enthalten in:
wolfv6 2016-06-07 20:24:50 -06:00
Ursprung a44b6f620d
Commit 514c326800
5 geänderte Dateien mit 26 neuen und 23 gelöschten Zeilen

Datei anzeigen

@ -29,7 +29,7 @@ Polling I2C may slow the scan rate enough so that no additional delay is needed:
const unsigned int Row::DELAY_MICROSECONDS = 0;
Slow-scan trick for debug messages that print too fast and not aligned, add this to sketch loop():
delay(1000);
delay(500);
Keyboard.println("");
That way debug messages are printed at a managable rate, and each scan starts a new line.
*/
@ -41,6 +41,7 @@ void RowBase::wait()
/*
pressRelease() calls key's press() or release() function if it was pressed or released.
Both parameters are bitwise.
rowEnd bit marks positioned immediatly after last key of row.
*/
void RowBase::pressRelease(const uint16_t rowEnd, const uint8_t debouncedChanged)
{

Datei anzeigen

@ -2,11 +2,15 @@
/*
Strobes the row and reads the columns.
Sets rowEnd and returns rowState.
rowEnd is a bitwise row mask, one col per bit, where active col bit is 1.
At end of function, 1 bit marks place immediatly after last key of row.
rowEnd is a larger type than portMask so that it can not overflow.
*/
uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
{
uint8_t rowState = 0;
uint8_t col = 1;
rowEnd = 1;
//strobe row on
if (activeHigh)
@ -17,16 +21,16 @@ uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
{
digitalWrite(strobePin, LOW);
}
delayMicroseconds(3); //time to stablize voltage
delayMicroseconds(3); //time to stablize voltage
//read all the column ports
for (uint8_t i=0; i < READ_PIN_COUNT; i++)
{
if ( digitalRead(readPins[i]) == activeHigh )
{
rowState |= col;
rowState |= rowEnd;
}
col <<= 1;
rowEnd <<= 1;
}
//strobe row off
@ -38,7 +42,6 @@ uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
{
digitalWrite(strobePin, HIGH);
}
rowEnd = col;
return rowState;
}

Datei anzeigen

@ -5,19 +5,16 @@
#include <RowScannerInterface.h>
#include <RowPort.h>
#include <ColPort.h>
/* rowPin > strobePins[]
replace port calls with
x pass 1: hard code pins for row0 and col6, init in setup()
x pass 2: readPins[] array
pass 3: move calls to IC classes - Strobe_uC, Read_uC
pass 4: add IC classes Strobe_MCP23018, Read_MCP23018 */
/* RowScanner_Arduino class uses Arduino pin numbers (no port name).
*/
class RowScanner_Arduino : public RowScannerInterface
{
private:
static const bool activeHigh; //logic level of strobe pin: 0=activeLow, 1=activeHigh
const uint8_t strobePin; //Arduino pin number connected to this row
const uint8_t* readPins; //array of read pins
const uint8_t READ_PIN_COUNT;//todo READ_PIN_COUNT
const uint8_t strobePin; //Arduino pin number connected to this row
const uint8_t* readPins; //array of read pin numbers
const uint8_t READ_PIN_COUNT; //number of read pins
public:
RowScanner_Arduino(const uint8_t strobePin,
const uint8_t readPins[], const uint8_t READ_PIN_COUNT)

Datei anzeigen

@ -37,14 +37,16 @@ uint8_t RowScanner_BitManipulation::scan(uint16_t& rowEnd)
/*
Copies column pins to rowState. Unused column pins are not copied.
Sets rowEnd and returns rowState.
rowEnd is bitwise, where 1 bit corrsiponds to place immediatly after last key of row.
rowEnd and rowMask are larger type than portMask so that they can not overflow.
rowEnd is a bitwise row mask, one col per bit, where active col bit is 1.
At end of function, 1 bit marks place immediatly after last key of row.
rowEnd is a larger type than portMask so that it can not overflow.
*/
uint8_t RowScanner_BitManipulation::getRowState(uint16_t& rowEnd)
{
uint16_t rowMask = 1; //bitwise, one col per bit, active col bit is 1
uint8_t rowState = 0; //bitwise, one key per bit, 1 means key is pressed
rowEnd = 1;
for (uint8_t i=0; i < colPortCount; i++) //for each col port
{
//bitwise colPins, 1 means pin is connected to column
@ -64,15 +66,13 @@ uint8_t RowScanner_BitManipulation::getRowState(uint16_t& rowEnd)
{
if (portMask & ~colPortState) //if pin detected a key press
{
rowState |= rowMask; //set rowState bit for that key
rowState |= rowEnd; //set rowState bit for that key
}
rowMask <<= 1; //shift rowMask to next key
rowEnd <<= 1; //shift rowEnd to next key
}
}
}
rowEnd = rowMask;
return rowState;
}

Datei anzeigen

@ -6,6 +6,8 @@
#include <RowPort.h>
#include <ColPort.h>
/* RowScanner_BitManipulation uses bit manipulation to read all pins of one port.
*/
class RowScanner_BitManipulation : public RowScannerInterface
{
private: