document

doc/keybrd_library_user_guide.md

@@ -47,10 +47,9 @@ The following install steps are modified from the [Teensyduino download page](ht
 
 For Linux:
 
-1. Download and extract the Arduino software.
+1. Download and extract the Arduino software to the /opt directory:
-   Move the extracted directory to /opt:
 
-       $ sudo mv ~/Downloads/arduino-1.6.7 /opt/arduino-1.6.7 
+       /opt/arduino-1.x.x 
 
 2. The "Linux udev rules" link is at top right of page.
    Save the teensy.rules file in /etc/udev/rules.d/
@@ -63,7 +62,7 @@ For Linux:
 
    Run the teensyduino installer and fill the form fields:
 
-       Arduino location to install Teensyduino: /usr/local/bin/arduino-1.x.x 
+       Arduino location to install Teensyduino: /opt/arduino-1.x.x 
        Libraries to Install: None
 
 4. Launch Arduino IDE from /opt/arduino-1.x.x/arduino

src/Code_LEDLock.cpp

@@ -38,28 +38,28 @@ void Code_LEDLock::release()
     Keyboard.release(scancode);
 }
 
-/* updateLED() is a separate function from press() because Arduino boards may need a different implementation.
+/* This comment is for Arduino board, because Arduino boards may need a different implementation.
-updateLED() has been tested on teensy 2.0.
+updateLED() has NOT been tested on an Arduino board.
- The variable "keyboard_leds" is in /opt/arduino-1.6.7/hardware/teensy/avr/cores/usb_hid/usb.c
+updateLED() has been tested on teensy 2.0 (not an Arduino board).
+The variable "keyboard_leds" is in /opt/arduino-1.6.7/hardware/teensy/avr/cores/usb_hid/usb.c
  // 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
  https://forum.pjrc.com/threads/25368-How-do-I-receive-a-numlock-capslock-LED-signal-from-the-PC
-updateLED() has NOT been tested on an Arduino board.
+The word "keyboard_leds does not appear in "Arduino\hardware\arduino\cores\
- The word "keyboard_leds does not appear in "Arduino\hardware\arduino\cores\
+This shows how to hack KeyReport in Arduino: https://www.sparkfun.com/tutorials/337
- This shows how to hack KeyReport in Arduino: https://www.sparkfun.com/tutorials/337
+TMK firmware, which is not Arduino, uses variable "usb_led" instead of "keyboard_leds"
-TMK firmware uses variable "usb_led" instead of "keyboard_leds"
  http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html >usb_led
 */
 void Code_LEDLock::updateLED() const
 {
-/* KEY_SCROLL_LOCK is not working on Teensy2.0, it prints keyboard_leds=0, maybe Linux doesn't have it.
+/* KEY_SCROLL_LOCK is not working on Linux with Teensy2.0.
-Here is the debug code:
+This debug code prints "keyboard_leds=0" when scrollLock is pressed:
-Keyboard.print(F(" keyboard_leds="));
+    Keyboard.print(F(" keyboard_leds="));
-Keyboard.print(keyboard_leds);//KEY_NUM_LOCK:1, KEY_CAPS_LOCK:2, KEY_SCROLL_LOCK:0
+    Keyboard.print(keyboard_leds); //KEY_NUM_LOCK:1, KEY_CAPS_LOCK:2, KEY_SCROLL_LOCK:0
-Keyboard.print(" ");
+    Keyboard.print(" ");
 */
-    if (keyboard_leds & USB_LED_bit)            //if LED status bit is set
+    if (keyboard_leds & USB_LED_bit)            //if USB_LED_bit is set
     {
-        refLED.off();                           //LED on/off seem inverted, but it works
+        refLED.off();                      //LED on/off seem inverted, but it works for active high
     }
     else
     {

src/StateLayers.cpp

@@ -19,7 +19,7 @@ void StateLayers::lock(const uint8_t layer)
     lockedLayer = layer;
 }
 
-//could set LED indicator lights in setActiveLayer()
+//Derived classes override setActiveLayer() to also set LED indicator lights.
 void StateLayers::setActiveLayer(const uint8_t layer)
 {
     activeLayer = layer;

src/StateLayers.h

@@ -3,7 +3,6 @@
 
 #include <inttypes.h>
 #include <StateLayersInterface.h>
-//#include <LED.h>
 
 /* basic StateLayers for keyboard.
 When pressed, Code_Layer objects call StateLayers functions lock() or hold().