RowScanner_Arduino, move initialization to constructor

src/RowBase.cpp

@@ -28,9 +28,10 @@ The largest allowabl DELAY_MICROSECONDS is 65535 (.065535 second).
 Polling I2C may slow the scan rate enough so that no additional delay is needed:
     const unsigned int Row::DELAY_MICROSECONDS = 0;
 
-Slow-scan trick for debug messages that print too fast, add delay to sketch loop():
+Slow-scan trick for debug messages that print too fast and not aligned, add this to sketch loop():
     delay(1000);
-That way debug messages are printed at a managable rate.
+    Keyboard.println("");
+That way debug messages are printed at a managable rate, and each scan starts a new line.
 */
 void RowBase::wait()
 {

src/RowScanner_Arduino.cpp

@@ -1,4 +1,5 @@
 #include "RowScanner_Arduino.h"
+
 /*
 Strobes the row and reads the columns.
 */
@@ -10,11 +11,11 @@ uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
     //strobe row on
     if (activeHigh)
     {
-        digitalWrite(stobePin, HIGH);
+        digitalWrite(strobePin, HIGH);
     }
     else //activeLow
     {
-        digitalWrite(stobePin, LOW);
+        digitalWrite(strobePin, LOW);
     }
     delayMicroseconds(3);  //time to stablize voltage
 
@@ -25,32 +26,19 @@ uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
         {
             rowState |= col;
         }
-/*
-Keyboard.print(" stobePin");
-Keyboard.print(stobePin);
-Keyboard.print(" readPins[");
-Keyboard.print(i);
-Keyboard.print("]");
-Keyboard.print((int)readPins[i]);
-Keyboard.print(" col");
-Keyboard.print(col);
-Keyboard.print(" ");
-*/
         col <<= 1;
     }
 
     //strobe row off
     if (activeHigh)
     {
-        digitalWrite(0, LOW);
+        digitalWrite(strobePin, LOW);
     }
     else //activeLow
     {
-        digitalWrite(0, HIGH);
+        digitalWrite(strobePin, HIGH);
     }
    
-    rowEnd = 4; //only read first two col, a1 b2 4
+    rowEnd = col;
-
-//Keyboard.print(rowState);
     return rowState;
 }

src/RowScanner_Arduino.h

@@ -5,23 +5,33 @@
 #include <RowScannerInterface.h>
 #include <RowPort.h>
 #include <ColPort.h>
-/* rowPin > stobePins[]
+/* rowPin > strobePins[]
 replace port calls with
   x pass 1: hard code pins for row0 and col6, init in setup()
-  x pass 2: pins[] array - first strobe, then read
+  x pass 2: readPins[] array
     pass 3: move calls to IC classes - Strobe_uC, Read_uC
     pass 4: add IC classes Strobe_MCP23018, Read_MCP23018 */
 class RowScanner_Arduino : public RowScannerInterface
 {
     private:
         static const bool activeHigh;           //logic level of strobe pin: 0=activeLow, 1=activeHigh
-        const uint8_t stobePin;                 //Arduino pin number connected to this row
+        const uint8_t strobePin;                 //Arduino pin number connected to this row
         const uint8_t* readPins;                //array of read pins
         const uint8_t READ_PIN_COUNT;//todo READ_PIN_COUNT
     public:
-        RowScanner_Arduino(const uint8_t stobePin,
+        RowScanner_Arduino(const uint8_t strobePin,
                 const uint8_t readPins[], const uint8_t READ_PIN_COUNT)
-            : stobePin(stobePin), readPins(readPins), READ_PIN_COUNT(READ_PIN_COUNT) {}
+            : strobePin(strobePin), readPins(readPins), READ_PIN_COUNT(READ_PIN_COUNT)
+        {
+            //row
+            pinMode(strobePin, OUTPUT);
+
+            //cols
+            for (uint8_t i=0; i < READ_PIN_COUNT; i++)
+            {
+                pinMode(readPins[i], INPUT_PULLUP);
+            }
+        }
         virtual uint8_t scan(uint16_t& rowEnd);
         uint8_t getRowState(uint16_t& rowEnd);
 };