RowScanner_Arduino, add stobePin, 2 rows

src/Row.h

@@ -24,7 +24,7 @@ class Row : public RowBase
         Debouncer_4Samples debouncer;
     public:
         //Row constructor was like Row_DH constructor
-        Row(Key *const ptrsKeys[]) : RowBase(ptrsKeys) { }
+        Row(const uint8_t rowPin, Key *const ptrsKeys[]) : RowBase(ptrsKeys), scanner(rowPin) { }
         virtual void process();
 };
 #endif

src/RowBase.cpp

@@ -23,11 +23,13 @@ Tactile switch MJTP series bounce 10 ms http://www.apem.com/files/apem/brochures
 Avoid sampling the switch input at a rate synchronous to events in the environment
  that might create periodic EMI. For instance, 50 and 60 Hz.
 
+The largest allowabl DELAY_MICROSECONDS is 65535 (.065535 second).
+
 Polling I2C may slow the scan rate enough so that no additional delay is needed:
     const unsigned int Row::DELAY_MICROSECONDS = 0;
 
-Slow-scan trick for debug messages that print too fast:
+Slow-scan trick for debug messages that print too fast, add delay:
-    change DELAY_MICROSECONDS to a large number like 10000
+    delay(1000);
 That way debug messages are printed at a managable rate.
 */
 void RowBase::wait()

src/RowScanner_Arduino.cpp

@@ -1,7 +1,7 @@
 #include "RowScanner_Arduino.h"
 /*
 Strobes the row and reads the columns.
-Strobe is on for shortest possible time to preserve IR LED on DodoHand's optic switch.
+Strobe is on for shortest possible time.
 */
 uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
 {
@@ -10,11 +10,11 @@ uint8_t RowScanner_Arduino::scan(uint16_t& rowEnd)
     //strobe row on
     if (activeHigh)
     {
-        digitalWrite(0, HIGH);
+        digitalWrite(stobePin, HIGH);
     }
     else //activeLow
     {
-        digitalWrite(0, LOW);
+        digitalWrite(stobePin, LOW);
     }
     delayMicroseconds(3);  //time to stablize voltage
     

src/RowScanner_Arduino.h

@@ -7,7 +7,7 @@
 #include <ColPort.h>
 /* rowPin > stobePins[]
 replace port calls with
-  x pass 1: hard coded pins for row0 and col6, init in setup()
+  x pass 1: hard code pins for row0 and col6, init in setup()
     pass 2: pins[] array - first strobe, then read
     pass 3: move calls to IC classes - Strobe_uC, Read_uC
     pass 4: add IC classes Strobe_MCP23018, Read_MCP23018 */
@@ -15,13 +15,14 @@ class RowScanner_Arduino : public RowScannerInterface
 {
     private:
         static const bool activeHigh;           //logic level of strobe pin: 0=activeLow, 1=activeHigh
-        //const uint8_t* stobePins;               //array of strobe pins
+        const uint8_t stobePin;                 //Arduino pin number connected to this row
         //const uint8_t* readPins;                //array of read pins
         //const uint8_t readPinCount;
     public:
-        /*RowScanner_Arduino()
+        RowScanner_Arduino(const uint8_t stobePin)
-            : 
+            : stobePin(stobePin)
-            readPinCount(readPinCount) {}*/
+        //    readPinCount(readPinCount)
+         {}
         virtual uint8_t scan(uint16_t& rowEnd);
         uint8_t getRowState(uint16_t& rowEnd);
 };