Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
keybrd/tutorials/keybrd_3f_autoShift/keybrd_3f_autoShift.ino
2016-09-22 17:12:11 -06:00

124 lines
3.5 KiB
C++

/* keybrd_3f_autoShift.ino
This sketch:
is a simple 2-layer keyboard with AutoShift
runs on the first two rows and columns of a breadboard keyboard
| Layout | **0** | **1** |
|:------:|-------|-------|
| **0** | a ! | b @ |
| **1** | fn | shift |
The layered keys in row 0 have two layers; one character for each layer.
Letters 'a' and 'b' are on the normal layer. Symbols '!' and '@' are one the fn layer.
Holding the fn key down makes it the active layer. Releasing the fn key restores the normal layer.
*/
// ################## GLOBAL ###################
// ================= INCLUDES ==================
//Keys
#include <Code_Sc.h>
#include <Code_ScS.h>
#include <Code_Shift.h>
#include <LayerState.h>
#include <Code_LayerHold.h>
#include <Key_LayeredKeys.h>
//Matrix
#include <Row.h>
#include <Scanner_uC.h>
#include <ScanDelay.h>
// ============ SPEED CONFIGURATION ============
ScanDelay scanDelay(9000);
// ================== SCANNER ==================
uint8_t readPins[] = {14, 15};
uint8_t readPinCount = sizeof(readPins)/sizeof(*readPins);
Scanner_uC scanner(LOW, readPins, readPinCount);
// =================== CODES ===================
// ---------------- LAYER CODE -----------------
enum layerIds { NORMAL, FN };
LayerState layerState;
Code_LayerHold l_fn(FN, layerState);
/* ---------------- SCAN CODES -----------------
The "Sc" in Code_Sc means "scancode".
When a Code_Sc is pressed, it sends its scancode.
*/
Code_Sc s_a(KEY_A);
Code_Sc s_b(KEY_B);
/* The "ScS" in Code_ScS means "scancode shifted".
When Code_ScS is pressed, it calls Code_AutoShift before sending its scancode.
*/
Code_ScS s_exclamation(KEY_1);
Code_ScS s_at(KEY_2);
// ----------------- SHIFT CODE ----------------
/*
The Code_Shift constructor takes one shift scancode.
*/
Code_Shift s_shift(MODIFIERKEY_LEFT_SHIFT);
/*
Code_Shift pointers are placed in an array because most keyboards have a left and right shift.
This sketch only has one shift code.
*/
Code_Shift* const ptrsS[] = { &s_shift };
Code_Shift* const* const Code_AutoShift::ptrsShifts = ptrsS;
const uint8_t Code_AutoShift::shiftCount = sizeof(ptrsS)/sizeof(*ptrsS);
/*
HOW SHIFT WORKS
When a shift key is pressed, a standard keyboard driver will temporarily modify the action of other scancodes.
KEY_1 writes '1'
MODIFIERKEY_LEFT_SHIFT + KEY_1 writes '!'
KEY_2 writes '2'
MODIFIERKEY_LEFT_SHIFT + KEY_2 writes '@'
HOW AUTOSHIFT WORKS
Code_ScS takes care of the MODIFIERKEY_LEFT_SHIFT automatically
When the user presses '!' or '@' on the fn layer:
Code_AutoShift checks the position of each shift key
Code_ScS sends MODIFIERKEY_LEFT_SHIFT scancode if needed
Code_ScS sends its scancode
*/
// =================== KEYS ====================
Key* const ptrsKeys_00[] = { &s_a, &s_exclamation };
Key_LayeredKeys k_00(ptrsKeys_00);
Key* const ptrsKeys_01[] = { &s_b, &s_at };
Key_LayeredKeys k_01(ptrsKeys_01);
LayerStateInterface& Key_LayeredKeys::refLayerState = layerState;
// =================== ROWS ====================
Key* const ptrsKeys_0[] = { &k_00, &k_01 };
uint8_t keyCount_0 = sizeof(ptrsKeys_0)/sizeof(*ptrsKeys_0);
Row row_0(scanner, 0, ptrsKeys_0, keyCount_0);
//Row row_0(0, readPins, READ_PIN_COUNT, ptrsKeys_0);
Key* const ptrsKeys_1[] = { &l_fn, &s_shift };
uint8_t keyCount_1 = sizeof(ptrsKeys_1)/sizeof(*ptrsKeys_1);
Row row_1(scanner, 1, ptrsKeys_1, keyCount_1);
//Row row_1(1, readPins, READ_PIN_COUNT, ptrsKeys_1);
// ################### MAIN ####################
void setup()
{
Keyboard.begin();
}
void loop()
{
row_0.process();
row_1.process();
scanDelay.delay();
}