Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
keybrd/src/Code_LEDLock.cpp

69 lines
2.4 KiB
C++

#include "Code_LEDLock.h"
/* USB_LED_bit are codes from http://www.usb.org/developers/hidpage/HID1_11.pdf keyboard output report
*/
Code_LEDLock::Code_LEDLock(const uint16_t scancode, LED& refLED)
: scancode(scancode), refLED(refLED)
{
switch (scancode) //initilize USB_LED_bit for given scancode
{
case KEY_NUM_LOCK:
USB_LED_bit = 1<<0;
break;
case KEY_CAPS_LOCK:
USB_LED_bit = 1<<1;
break;
case KEY_SCROLL_LOCK:
USB_LED_bit = 1<<2;
break;
/* guessing at these case names:
case KEY_COMPOSE: //for separate accent keys
USB_LED_bit = 1<<3; break;
break;
case KEY_KANA: //for Japanese keyboards
USB_LED_bit = 1<<4; break;
break;
*/
}
}
void Code_LEDLock::press()
{
Keyboard.press(scancode);
updateLED();
}
void Code_LEDLock::release()
{
Keyboard.release(scancode);
}
/* This comment is for Arduino board, because Arduino boards may need a different implementation.
updateLED() has NOT been tested on an Arduino board.
updateLED() has been tested on teensy 2.0 (not an Arduino board).
The variable "keyboard_leds" is in /opt/arduino-1.6.7/hardware/teensy/avr/cores/usb_hid/usb.c
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
https://forum.pjrc.com/threads/25368-How-do-I-receive-a-numlock-capslock-LED-signal-from-the-PC
The word "keyboard_leds does not appear in "Arduino\hardware\arduino\cores\
This shows how to hack KeyReport in Arduino: https://www.sparkfun.com/tutorials/337
TMK firmware, which is not Arduino, uses variable "usb_led" instead of "keyboard_leds"
http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html >usb_led
*/
void Code_LEDLock::updateLED() const
{
/* KEY_SCROLL_LOCK is not working on Linux with Teensy2.0.
This debug code prints "keyboard_leds=0" when scrollLock is pressed:
Keyboard.print(F(" keyboard_leds="));
Keyboard.print(keyboard_leds); //KEY_NUM_LOCK:1, KEY_CAPS_LOCK:2, KEY_SCROLL_LOCK:0
Keyboard.print(" ");
*/
if (keyboard_leds & USB_LED_bit) //if USB_LED_bit is set
{
refLED.off(); //LED on-off seem inverted, but it works for active low and active high
}
else
{
refLED.on();
}
}