Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
keybrd/examples/keybrd_shift_register/keybrd_shift_register.ino
2016-07-03 21:26:38 -06:00

168 lines
5.5 KiB
C++

/* keybrd_shift_reg.ino
Tested on Teensy LC and daisy chained 74HC165 shift registers
The keyboard hardware for this sketch has 4 shift registers,
with every 4th input pin connected to a pull-down resistor and matrix column, also the 31st key.
Unused input pins are not grounded, so add this line to RowScanner_SPIShiftRegisters::scan():
//clear unpowered pins (for testing on breadboard)
rowState &= 0b01010001000100010001000100010001;
Layout
| Left |**0**|**1**| | Right |**0**|**1**|**2**|**3**|**4**|**5**|**6**|**7**|**8**|
|:-----:|-----|-----| |:-----:|-----|-----|-----|-----|-----|-----|-----|-----|-----|
| **0** | a | b | | **0** | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| **1** | c | d | | **1** | a | b | c | d | e | f | g | h | i |
*/
// ################## GLOBAL ###################
// ================= INCLUDES ==================
#include <Debug.h>
//Codes
#include <Code_Sc.h>
//Matrix
#include <Row_uC.h>
#include <SPI.h>
#include <Row_ShiftRegisters.h>
// =============== CONFIGURATION ===============
const unsigned int RowBase::DELAY_MICROSECONDS = 0; //500
const bool RowScanner_PinsArray::ACTIVE_HIGH = 0; //left matrix is active low
const uint8_t RowScanner_SPIShiftRegisters::SHIFT_LOAD = 10;
Debug debug;
// ================= LEFT PINS =================
uint8_t readPins[] = {14, 15};
uint8_t READ_PIN_COUNT = sizeof(readPins)/sizeof(*readPins);
// =================== CODES ===================
Code_Sc s_a(KEY_A);
Code_Sc s_b(KEY_B);
Code_Sc s_c(KEY_C);
Code_Sc s_d(KEY_D);
Code_Sc s_e(KEY_E);
Code_Sc s_f(KEY_F);
Code_Sc s_g(KEY_G);
Code_Sc s_h(KEY_H);
Code_Sc s_i(KEY_I);
Code_Sc s_0(KEY_0);
Code_Sc s_1(KEY_1);
Code_Sc s_2(KEY_2);
Code_Sc s_3(KEY_3);
Code_Sc s_4(KEY_4);
Code_Sc s_5(KEY_5);
Code_Sc s_6(KEY_6);
Code_Sc s_7(KEY_7);
Code_Sc s_8(KEY_8);
Code_Sc s_z(KEY_Z);
// ================= LEFT ROWS =================
Key* ptrsKeys_L0[] = { &s_a, &s_b };
Row_uC row_L0(0, readPins, READ_PIN_COUNT, ptrsKeys_L0);
Key* ptrsKeys_L1[] = { &s_c, &s_d };
Row_uC row_L1(1, readPins, READ_PIN_COUNT, ptrsKeys_L1);
// ================= RIGHT ROWS ================
//typedef should be large in /home/wolfv/Documents/Arduino/keybrd_proj/keybrd/src/config_keybrd.h
//Row_ShiftRegisters(STROBE_PIN, ptrsKeys[], KEY_COUNT)
//the s_z are place holders and should not print
/*
//prints 0 1
Key* ptrsKeys_R0[] = { &s_0, &s_z, &s_z, &s_z, &s_1, &s_z, &s_z, &s_z };
const uint8_t KEY_R0_COUNT = sizeof(ptrsKeys_R0)/sizeof(*ptrsKeys_R0);
Row_ShiftRegisters row_R0(8, ptrsKeys_R0, KEY_R0_COUNT);
//prints a b
Key* ptrsKeys_R1[] = { &s_a, &s_z, &s_z, &s_z, &s_b, &s_z, &s_z, &s_z };
const uint8_t KEY_R1_COUNT = sizeof(ptrsKeys_R1)/sizeof(*ptrsKeys_R1);
Row_ShiftRegisters row_R1(9, ptrsKeys_R1, KEY_R1_COUNT);
*/
/*
//prints 0 1 2
Key* ptrsKeys_R0[] = { &s_0, &s_z, &s_z, &s_z, &s_1, &s_z, &s_z, &s_z,
&s_2, &s_z, &s_z, &s_z };
const uint8_t KEY_R0_COUNT = sizeof(ptrsKeys_R0)/sizeof(*ptrsKeys_R0);
Row_ShiftRegisters row_R0(8, ptrsKeys_R0, KEY_R0_COUNT);
*/
/*
//prints 0 1 2 3
Key* ptrsKeys_R0[] = { &s_0, &s_z, &s_z, &s_z, &s_1, &s_z, &s_z, &s_z,
&s_2, &s_z, &s_z, &s_z, &s_3, &s_z, &s_z, &s_z };
const uint8_t KEY_R0_COUNT = sizeof(ptrsKeys_R0)/sizeof(*ptrsKeys_R0);
Row_ShiftRegisters row_R0(8, ptrsKeys_R0, KEY_R0_COUNT);
*/
/*
//prints 0 1 2 3 4 5
Key* ptrsKeys_R0[] = { &s_0, &s_z, &s_z, &s_z, &s_1, &s_z, &s_z, &s_z,
&s_2, &s_z, &s_z, &s_z, &s_3, &s_z, &s_z, &s_z,
&s_4, &s_z, &s_z, &s_z, &s_5, &s_z, &s_z, &s_z };
const uint8_t KEY_R0_COUNT = sizeof(ptrsKeys_R0)/sizeof(*ptrsKeys_R0);
Row_ShiftRegisters row_R0(8, ptrsKeys_R0, KEY_R0_COUNT);
*/
//prints 0 1 2 3 4 5 6 7 8, microseconds_per_scan=87 with SAMPLE_COUNT 4
Key* ptrsKeys_R0[] = { &s_0, &s_z, &s_z, &s_z, &s_1, &s_z, &s_z, &s_z,
&s_2, &s_z, &s_z, &s_z, &s_3, &s_z, &s_z, &s_z,
&s_4, &s_z, &s_z, &s_z, &s_5, &s_z, &s_z, &s_z,
&s_6, &s_z, &s_z, &s_z, &s_7, &s_z, &s_8 }; //31-key limit because endRow
const uint8_t KEY_R0_COUNT = sizeof(ptrsKeys_R0)/sizeof(*ptrsKeys_R0);
Row_ShiftRegisters row_R0(8, ptrsKeys_R0, KEY_R0_COUNT);
//prints a b c d e f g h i
Key* ptrsKeys_R1[] = { &s_a, &s_z, &s_z, &s_z, &s_b, &s_z, &s_z, &s_z,
&s_c, &s_z, &s_z, &s_z, &s_d, &s_z, &s_z, &s_z,
&s_e, &s_z, &s_z, &s_z, &s_f, &s_z, &s_z, &s_z,
&s_g, &s_z, &s_z, &s_z, &s_h, &s_z, &s_i }; //31-key limit because endRow
const uint8_t KEY_R1_COUNT = sizeof(ptrsKeys_R1)/sizeof(*ptrsKeys_R1);
Row_ShiftRegisters row_R1(9, ptrsKeys_R1, KEY_R1_COUNT);
const uint8_t LED_PIN = 16; //indicates wait
//sometimes OS takes 6 seconds to recongnize keyboard, LED blinks from the begining
void wait()
{
for (uint8_t count = 0; count < 6; count++)
{
//print count
Keyboard.print(count);
Keyboard.print(F(" "));
//blink LED
digitalWrite(LED_PIN, HIGH);
delay(900);
digitalWrite(LED_PIN, LOW);
delay(100);
}
}
// ################### MAIN ####################
void setup()
{
pinMode (LED_PIN, OUTPUT);
Keyboard.begin();
wait();
SPI.begin();
row_R0.begin();
row_R1.begin();
Keyboard.print(F("keybrd_shift_reg.ino "));
debug.print_free_RAM();
}
void loop()
{
row_L0.process();
row_L1.process();
row_R0.process();
row_R1.process();
//delay(100);
//Keyboard.println("");
//debug.print_microseconds_per_scan();
}