- M0110/M0110A to USB keyboard converter
- ======================================
- This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
-
- Read README of top directory too.
-
- Pictures of **M0110 + M0120** and **M0110A** with [TMK converter].
-
- ![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg)
- ![M0110A](http://i.imgur.com/HuHOEoHm.jpg)
-
-
- - M0110A support was contributed by [skagon@github](https://github.com/skagon).
- - M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.
-
-
-
- Update
- ------
- - 2013/08: Change port for signals `PF` to `PD`
- - 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now.
- - 2014/06: Change keymaps
- - 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c)
- - 2016/09: Unimap support - keymap editor on web browser
-
-
-
- Hardware
- --------
- You can buy preassembled [TMK converter] or make yourown with AVR dev board like PJRC [Teensy].
-
- Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
-
- [![M0110 Converter](http://i.imgur.com/yEp2eRim.jpg)](http://i.imgur.com/yEp2eRi.jpg)
-
- ### 4P4C phone handset cable
- Note that original cable used with Mac is **straight** while phone handset cable is **crossover**.
-
- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
-
- [Teensy]: http://www.pjrc.com/teensy/
- [TMK converter]: https://geekhack.org/index.php?topic=72052.0
-
-
- ### Socket Pinout
- - <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
-
- ![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
-
-
- ### Pull-up Resistor
- You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.
-
-
-
- Building Firmware
- -----------------
- To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap.
-
- $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
- $ cd m0110_usb
- $ make -f Makefile.rev2 clean
- $ make -f Makefile.rev2 [KEYMAP={intl|spacefn}]
-
- Use `Maefile.rev1` for TMK converter rev.1 and Teensy(ATMega32u4), instead.
-
-
-
- Keymap
- ------
- To create your own keymap copy existent keymap file to `keymap_<name>.c` and edit it. You can build with `make -f Makfile.rev2 KEYMAP=<name>`.
-
- Or you can edit keymap on web browser and download firmware.
-
- http://www.tmk-kbd.com/tmk_keyboard/editor/
-
-
- Debug
- -----
- You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Magic>+H` simultaneously to get help.
-
- - Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`)
|