@@ -1,10 +1,5 @@ | |||
# | |||
# Makefile for PJRC Teensy | |||
# | |||
# Target file name (without extension). | |||
TARGET = ps2_usb_pjrc | |||
TARGET = ps2_usb | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
@@ -12,14 +7,6 @@ TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap.c \ | |||
matrix.c \ | |||
led.c \ | |||
ps2.c | |||
CONFIG_H = config_pjrc.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
@@ -44,6 +31,33 @@ MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||
# keyboard dependent files | |||
SRC = keymap.c \ | |||
matrix.c \ | |||
led.c | |||
ifdef PS2_USE_USART | |||
SRC += protocol/ps2_usart.c | |||
OPT_DEFS += -DPS2_USE_USART | |||
endif | |||
ifdef PS2_USE_INT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_INT | |||
endif | |||
ifdef PS2_USE_BUSYWAIT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||
endif | |||
#CONFIG_H = config_pjrc_usart.h | |||
CONFIG_H = config.h | |||
#---------------- Programming Options -------------------------- |
@@ -1,10 +1,5 @@ | |||
# | |||
# Makefile for PJRC Teensy | |||
# | |||
# Target file name (without extension). | |||
TARGET = ps2_usb_pjrc_usart | |||
TARGET = ps2_usb_jis | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
@@ -12,14 +7,6 @@ TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap.c \ | |||
matrix.c \ | |||
led.c \ | |||
ps2_usart.c | |||
CONFIG_H = config_pjrc_usart.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
@@ -44,6 +31,33 @@ MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||
PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||
# keyboard dependent files | |||
SRC = keymap_jis.c \ | |||
matrix.c \ | |||
led.c | |||
ifdef PS2_USE_USART | |||
SRC += protocol/ps2_usart.c | |||
OPT_DEFS += -DPS2_USE_USART | |||
endif | |||
ifdef PS2_USE_INT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_INT | |||
endif | |||
ifdef PS2_USE_BUSYWAIT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||
endif | |||
#CONFIG_H = config_pjrc_usart.h | |||
CONFIG_H = config.h | |||
#---------------- Programming Options -------------------------- |
@@ -1,8 +1,3 @@ | |||
# | |||
# Makefile for V-USB | |||
# | |||
# Target file name (without extension). | |||
TARGET = ps2_usb_vusb | |||
@@ -15,15 +10,18 @@ TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap.c \ | |||
matrix.c \ | |||
led.c \ | |||
ps2_usart.c | |||
led.c | |||
# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful. | |||
SRC += protocol/ps2_usart.c | |||
OPT_DEFS += -DPS2_USE_USART | |||
CONFIG_H = config_vusb.h | |||
CONFIG_H = config.h | |||
# V-USB debug level: To use ps2_usart.c level must be 0 | |||
# ps2_usart.c requires USART to receive PS/2 signal. | |||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||
OPT_DEFS += -DDEBUG_LEVEL=0 | |||
# MCU name, you MUST set this to match the board you are using |
@@ -1,7 +1,7 @@ | |||
PS/2 to USB keyboard converter | |||
============================== | |||
This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2. | |||
This will works on USB AVR(ATMega32U4, AT90USB) or V-USB. | |||
This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2. | |||
This will works on USB AVR(ATMega32U4, AT90USB) or V-USB(ATMega168, 328...). | |||
Features | |||
@@ -19,25 +19,29 @@ Keymap customization | |||
PS/2 signal handling implementations | |||
------------------------------------ | |||
Following three methods are used to implement PS/2 signal handling. | |||
a. Simple and stupid wait & read loop(intensive use of cycles) | |||
This is implemented with (expected) portable C code for reference. See ps2.c. | |||
b. Interrupt driven | |||
See ps2_intr.c | |||
c. Using USART hardware module(no cycle needed) | |||
This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter. | |||
See ps2_usart.c. | |||
Build Converter | |||
--------------- | |||
Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock). | |||
For a. Simple and stupid and b. Interrupt implementaion: | |||
By default Clock is on PF0 and Data on PF1. | |||
You can change this pin configuration by editing config_pjrc.h. | |||
In this photo Vcc is yellow, GND is green, Data is red and Clock is black. | |||
http://img17.imageshack.us/img17/7243/201101181933.jpg | |||
For c. USART implementation: | |||
In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2. | |||
a. Simple and stupid busy-wait(ps2.c) | |||
This is expected to implemented with portable C code for reference. | |||
b. Interrupt driven(ps2.c) | |||
Uses external interrupt to detect falling edge of clock line. | |||
c. USART hardware module(ps2_usart.c) | |||
Uses AVR USART engine to recevie PS/2 signal. Recomended and default. | |||
This is required to work with V-USB, preceding two methods tend to | |||
miss signal edges while V-USB handles USB. | |||
To select method edit Makefile. | |||
Connect Wires | |||
------------- | |||
In case of Teensy2.0(ATMega32U4): | |||
0. Connect Vcc and GND. | |||
1. Connect Clock and Data line. | |||
For a. Clock is on PF0 and Data on PF1. | |||
For b. Clock is on PD1 and Data on PD2. | |||
For c. Clock is on PD5 and Data on PD2. | |||
2. Optionally you need pull-up register. 1K-10K Ohm is OK. | |||
To change pin configuration edit config.h. | |||
Build Frimware | |||
@@ -45,12 +49,12 @@ Build Frimware | |||
1. Edit Makefile for build options and MCU setting. | |||
Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0. | |||
2. make | |||
Just type 'make' in a terminal. | |||
Use '-f Makefile.pjrc_intr' option to use b. Interrupt. | |||
Use '-f Makefile.pjrc_usart' option to use c. USART. | |||
Use '-f Makefile.vusb' option to build V-USB converter. | |||
3. program with Teensy Loader. | |||
http://www.pjrc.com/teensy/loader.html | |||
Just type `make` in a terminal. | |||
Use `-f Makefile.vusb` option to build V-USB converter. | |||
Use `-f Makefile.jis` option to use JIS keyboard. | |||
3. program MCU. | |||
In case of Teensy use `Teensy Loader`.(http://www.pjrc.com/teensy/loader.html) | |||
Otherwise you want to use `avrdude` or `dfu-programmer`. | |||
Demonstration of Features | |||
@@ -83,34 +87,36 @@ Fn layer function: | |||
Keymap | |||
------ | |||
You can change a keymap by editing code of keymap.c like following. | |||
How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h. | |||
To define keymap layer switching may needs a bit of your effort at this time. | |||
/* Default Layer: plain keymap | |||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. | |||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| | |||
* `---' `---------------' `---------------' `---------------' `-----------' `-----------' | |||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| | |||
* |-----------------------------------------------------------| |-----------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | | |||
* |-----------------------------------------------------------| `-----------' |-----------| +| | |||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | | |||
* |-----------------------------------------------------------| ,---. |---------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | | |||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | | |||
* `-----------------------------------------------------------' `-----------' `---------------' | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, | |||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, | |||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, | |||
LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT | |||
), | |||
You can change a keymap by editing code of keymap. See common/keycode.h for key symbols. | |||
V-USB Support | |||
------------- | |||
You can also use this converter on ATmega(168/328) with V-USB instead of Teensy. | |||
The converter on V-USB lacks some features for now: USB NKRO and System/Media control. | |||
Circuit | |||
------- | |||
+---+ +---------------+ | |||
USB GND | | ATmega168 | | |||
=== C3 | | | |||
5V <-------+--------+---|Vcc,AVCC | PS/2 | |||
R1 | | ==== | |||
D- <----+--+-----R2-----|INT1 RXD|------->DATA | |||
D+ <----|---+----R3-----|INT0 XCK|------->CLOCK | |||
Z1 Z2 | | ->5V | |||
GND<----+---+--+--+-----|GND | ->GND | |||
| | | | | |||
| C2-+--|XTAL1 | | |||
| X1 | | | |||
+--C3-+--|XTAL2 | | |||
+---------------+ | |||
R1: 1.5K Ohm | |||
R2,R3: 68 Ohm | |||
Z1,Z2: Zenner 3.6V | |||
C1,C2: 22pF | |||
C3: 0.1uF | |||
X1: Crystal 20MHz(16MHz/12MHz) | |||
EOF |
@@ -1,37 +0,0 @@ | |||
V-USB Support | |||
============= | |||
You can also use this converter on ATmega(168/328) with V-USB instead of Teensy. | |||
The converter on V-USB lacks some features for now: USB NKRO and System/Media control. | |||
To build a firmware use Makefile.vusb instead of Makefile. | |||
Circuit | |||
------- | |||
+---+ +---------------+ | |||
USB GND | | ATmega168 | | |||
=== C3 | | | |||
5V <-------+--------+---|Vcc,AVCC | PS/2 | |||
R1 | | ==== | |||
D- <----+--+-----R2-----|INT1 RXD|------->DATA | |||
D+ <----|---+----R3-----|INT0 XCK|------->CLOCK | |||
Z1 Z2 | | ->5V | |||
GND<----+---+--+--+-----|GND | ->GND | |||
| | | | | |||
| C2-+--|XTAL1 | | |||
| X1 | | | |||
+--C3-+--|XTAL2 | | |||
+---------------+ | |||
R1: 1.5K Ohm | |||
R2,R3: 68 Ohm | |||
Z1,Z2: Zenner 3.6V | |||
C1,C2: 22pF | |||
C3: 0.1uF | |||
X1: Crystal 20MHz(16MHz/12MHz) | |||
This is my V-USB converter on breadboard. | |||
[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG] | |||
EOF |
@@ -1,5 +1,5 @@ | |||
/* | |||
Copyright 2011 Jun Wako <[email protected]> | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
@@ -18,11 +18,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include <avr/interrupt.h> | |||
/* controller configuration */ | |||
#include "controller_teensy.h" | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x2233 | |||
// TODO: share these strings with usbconfig.h | |||
// Edit usbconfig.h to change these. | |||
#define PRODUCT_ID 0x6512 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT PS/2 keyboard converter | |||
#define DESCRIPTION convert PS/2 keyboard to USB | |||
@@ -46,30 +47,62 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
#endif | |||
/* PS/2 lines */ | |||
#ifdef PS2_USE_USART | |||
#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) | |||
/* XCK for clock line and RXD for data line */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 4 | |||
#define PS2_CLOCK_BIT 5 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#define PS2_DATA_BIT 2 | |||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ | |||
/* set DDR of CLOCK as input to be slave */ | |||
#define PS2_USART_INIT() do { \ | |||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||
UCSR1C = ((1 << UMSEL10) | \ | |||
(3 << UPM10) | \ | |||
(0 << USBS1) | \ | |||
(3 << UCSZ10) | \ | |||
(0 << UCPOL1)); \ | |||
UCSR1A = 0; \ | |||
UBRR1H = 0; \ | |||
UBRR1L = 0; \ | |||
} while (0) | |||
#define PS2_USART_RX_INT_ON() do { \ | |||
UCSR1B = ((1 << RXCIE1) | \ | |||
(1 << RXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_POLL_ON() do { \ | |||
UCSR1B = (1 << RXEN1); \ | |||
} while (0) | |||
#define PS2_USART_OFF() do { \ | |||
UCSR1C = 0; \ | |||
UCSR1B &= ~((1 << RXEN1) | \ | |||
(1 << TXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) | |||
#define PS2_USART_RX_DATA UDR1 | |||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) | |||
#define PS2_USART_RX_VECT USART1_RX_vect | |||
// Synchronous USART is used to receive data from keyboard. | |||
// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK. | |||
// NOTE: This is recomended strongly if you use V-USB library. | |||
#define PS2_USE_USART | |||
// External or Pin Change Interrupt is used to receive data from keyboard. | |||
// Use INT1 or PCINTxx for PS/2 CLOCK line. see below. | |||
//#define PS2_USE_INT | |||
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) | |||
/* XCK for clock line and RXD for data line */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 4 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#ifdef PS2_USE_USART | |||
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge | |||
// set DDR of CLOCK as input to be slave | |||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ | |||
/* set DDR of CLOCK as input to be slave */ | |||
#define PS2_USART_INIT() do { \ | |||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||
@@ -99,10 +132,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0))) | |||
#define PS2_USART_RX_VECT USART_RX_vect | |||
#endif | |||
#endif | |||
#ifdef PS2_USE_INT | |||
/* INT1 | |||
/* uses INT1 for clock line(ATMega32U4) */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 2 | |||
#define PS2_INT_INIT() do { \ | |||
EICRA |= ((1<<ISC11) | \ | |||
(0<<ISC10)); \ | |||
@@ -114,20 +157,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
EIMSK &= ~(1<<INT1); \ | |||
} while (0) | |||
#define PS2_INT_VECT INT1_vect | |||
*/ | |||
#endif | |||
/* PCINT20 */ | |||
#define PS2_INT_INIT() do { \ | |||
PCICR |= (1<<PCIE2); \ | |||
} while (0) | |||
#define PS2_INT_ON() do { \ | |||
PCMSK2 |= (1<<PCINT20); \ | |||
} while (0) | |||
#define PS2_INT_OFF() do { \ | |||
PCMSK2 &= ~(1<<PCINT20); \ | |||
PCICR &= ~(1<<PCIE2); \ | |||
} while (0) | |||
#define PS2_INT_VECT PCINT2_vect | |||
#ifdef PS2_USE_BUSYWAIT | |||
#define PS2_CLOCK_PORT PORTF | |||
#define PS2_CLOCK_PIN PINF | |||
#define PS2_CLOCK_DDR DDRF | |||
#define PS2_CLOCK_BIT 0 | |||
#define PS2_DATA_PORT PORTF | |||
#define PS2_DATA_PIN PINF | |||
#define PS2_DATA_DDR DDRF | |||
#define PS2_DATA_BIT 1 | |||
#endif | |||
#endif |
@@ -1,59 +0,0 @@ | |||
/* | |||
Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
/* controller configuration */ | |||
#include "controller_teensy.h" | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6512 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT PS/2 keyboard converter | |||
#define DESCRIPTION convert PS/2 keyboard to USB | |||
/* matrix size */ | |||
#define MATRIX_ROWS 32 // keycode bit: 3-0 | |||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ | |||
keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ | |||
) | |||
/* mouse keys */ | |||
#ifdef MOUSEKEY_ENABLE | |||
# define MOUSEKEY_DELAY_TIME 255 | |||
#endif | |||
/* PS/2 lines */ | |||
#define PS2_CLOCK_PORT PORTF | |||
#define PS2_CLOCK_PIN PINF | |||
#define PS2_CLOCK_DDR DDRF | |||
#define PS2_CLOCK_BIT 0 | |||
#define PS2_DATA_PORT PORTF | |||
#define PS2_DATA_PIN PINF | |||
#define PS2_DATA_DDR DDRF | |||
#define PS2_DATA_BIT 1 | |||
#endif |
@@ -1,91 +0,0 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
/* controller configuration */ | |||
#include "controller_teensy.h" | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6513 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT PS/2 keyboard converter(USART) | |||
#define DESCRIPTION convert PS/2 keyboard to USB | |||
/* matrix size */ | |||
#define MATRIX_ROWS 32 // keycode bit: 3-0 | |||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ | |||
keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ | |||
) | |||
/* mouse keys */ | |||
#ifdef MOUSEKEY_ENABLE | |||
# define MOUSEKEY_DELAY_TIME 255 | |||
#endif | |||
/* PS/2 lines */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 5 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 2 | |||
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge | |||
// set DDR of CLOCK as input to be slave | |||
#define PS2_USART_INIT() do { \ | |||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||
UCSR1C = ((1 << UMSEL10) | \ | |||
(3 << UPM10) | \ | |||
(0 << USBS1) | \ | |||
(3 << UCSZ10) | \ | |||
(0 << UCPOL1)); \ | |||
UCSR1A = 0; \ | |||
UBRR1H = 0; \ | |||
UBRR1L = 0; \ | |||
} while (0) | |||
#define PS2_USART_RX_INT_ON() do { \ | |||
UCSR1B = ((1 << RXCIE1) | \ | |||
(1 << RXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_POLL_ON() do { \ | |||
UCSR1B = (1 << RXEN1); \ | |||
} while (0) | |||
#define PS2_USART_OFF() do { \ | |||
UCSR1C = 0; \ | |||
UCSR1B &= ~((1 << RXEN1) | \ | |||
(1 << TXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) | |||
#define PS2_USART_RX_DATA UDR1 | |||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) | |||
#define PS2_USART_RX_VECT USART1_RX_vect | |||
#endif |
@@ -0,0 +1,297 @@ | |||
/* | |||
Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
/* | |||
* Keymap for PS/2 keyboard | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "usb_keycodes.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "keymap.h" | |||
// Following macros help you to define a keymap with the form of actual keyboard layout. | |||
/* US layout plus all other various keys */ | |||
#define KEYMAP_ALL( \ | |||
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ | |||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ | |||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ | |||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ | |||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ | |||
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ | |||
\ | |||
K61, /* for European ISO */ \ | |||
K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ | |||
K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ | |||
KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ | |||
KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ | |||
KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ | |||
KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ | |||
K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ | |||
KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ | |||
) { \ | |||
{ KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ | |||
{ KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \ | |||
{ KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \ | |||
{ KB_##K18, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \ | |||
{ KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \ | |||
{ KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \ | |||
{ KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \ | |||
{ KB_##K38, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \ | |||
{ KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \ | |||
{ KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ | |||
{ KB_##K50, KB_##K51, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_##K57 }, \ | |||
{ KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_##K5F }, \ | |||
{ KB_NO, KB_##K61, KB_NO, KB_NO, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \ | |||
{ KB_NO, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ | |||
{ KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ | |||
{ KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_##K90, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_##K95, KB_NO, KB_NO }, \ | |||
{ KB_##K98, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \ | |||
{ KB_##KA0, KB_##KA1, KB_NO, KB_##KA3, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \ | |||
{ KB_##KA8, KB_NO, KB_NO, KB_##KAB, KB_NO, KB_NO, KB_NO, KB_##KAF }, \ | |||
{ KB_##KB0, KB_NO, KB_##KB2, KB_NO, KB_##KB4, KB_NO, KB_NO, KB_##KB7 }, \ | |||
{ KB_##KB8, KB_NO, KB_##KBA, KB_##KBB, KB_NO, KB_NO, KB_NO, KB_##KBF }, \ | |||
{ KB_##KC0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_##KC8, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_##KCD, KB_NO, KB_NO }, \ | |||
{ KB_##KD0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \ | |||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \ | |||
{ KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \ | |||
{ KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \ | |||
} | |||
/* JIS layout */ | |||
#define KEYMAP_JIS( \ | |||
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ | |||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ | |||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \ | |||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \ | |||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \ | |||
K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \ | |||
) \ | |||
KEYMAP_ALL( \ | |||
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ | |||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ | |||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ | |||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ | |||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ | |||
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ | |||
\ | |||
NUBS, \ | |||
K51, K13, K6A, K64, K67, \ | |||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \ | |||
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \ | |||
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \ | |||
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \ | |||
MAIL, CALCULATOR, MY_COMPUTER, \ | |||
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \ | |||
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \ | |||
) | |||
#define KEYMAP_JIS_COMPACT( \ | |||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, \ | |||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, \ | |||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, \ | |||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, \ | |||
K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94 \ | |||
) \ | |||
KEYMAP_ALL( \ | |||
ESC,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12, PSCR,SLCK,BRK, \ | |||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \ | |||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, DEL, END, PGDN, P7, P8, P9, \ | |||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, P4, P5, P6, PPLS, \ | |||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, UP, P1, P2, P3, \ | |||
K14,K9F,K11, K29, K91,KA7,KAF,K94, LEFT,DOWN,RGHT, P0, PDOT,PENT, \ | |||
\ | |||
NUBS, \ | |||
K51, K13, K6A, K64, K67, \ | |||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \ | |||
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \ | |||
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \ | |||
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \ | |||
MAIL, CALCULATOR, MY_COMPUTER, \ | |||
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \ | |||
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \ | |||
) | |||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. | |||
static const uint8_t PROGMEM fn_layer[] = { | |||
1, // Fn0 | |||
2, // Fn1 | |||
1, // Fn2 | |||
2, // Fn3 | |||
3, // Fn4 | |||
4, // Fn5 | |||
0, // Fn6 | |||
0 // Fn7 | |||
}; | |||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. | |||
// See layer.c for details. | |||
static const uint8_t PROGMEM fn_keycode[] = { | |||
KB_SCLN, // Fn0 | |||
KB_SLSH, // Fn1 | |||
KB_BSPC, // Fn2 | |||
KB_NO, // Fn3 | |||
KB_NO, // Fn4 | |||
KB_SPC, // Fn5 | |||
KB_NO, // Fn6 | |||
KB_NO // Fn7 | |||
}; | |||
// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode. | |||
// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro. | |||
// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS. | |||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* 0: JIS LAYOUT | |||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. | |||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| | |||
* `---' `---------------' `---------------' `---------------' `-----------' `-----------' | |||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| JY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| | |||
* |-----------------------------------------------------------| |-----------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret | |Del|End|PgD| | 7| 8| 9| | | |||
* |------------------------------------------------------` | `-----------' |-----------| +| | |||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| :| \| | | 4| 5| 6| | | |||
* |-----------------------------------------------------------| ,---. |---------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3| | | |||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||
* |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | | |||
* `-----------------------------------------------------------' `-----------' `---------------' | |||
*/ | |||
/* | |||
KEYMAP_JIS( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, END, PGDN, P7, P8, P9, | |||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, ENT, P4, P5, P6, PPLS, | |||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, UP, P1, P2, P3, | |||
LCTL,LGUI,LALT, MHEN,SPC, HENK,KANA, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT | |||
), | |||
*/ | |||
/* 0: HHKB-wise | |||
* ,-----------------------------------------------------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| | |||
* |-----------------------------------------------------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bsp | | |||
* |------------------------------------------------------` | | |||
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| :|Ret| | | |||
* |-----------------------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| | |||
* `-----------------------------------------------------------' | |||
*/ | |||
KEYMAP_JIS_COMPACT( | |||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, | |||
LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT,GRV, ENT, | |||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, FN4, | |||
LCTL,LGUI,LALT, LALT,FN5, FN2, FN3, RALT,RGUI,APP, LGUI | |||
), | |||
/* 1: Mouse keys | |||
* ,-----------------------------------------------------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| | |||
* |-----------------------------------------------------------| | |||
* |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| | |||
* |-----------------------------------------------------------| | |||
* |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | | |||
* |-----------------------------------------------------------| | |||
* |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl| | |||
* `-----------------------------------------------------------' | |||
* Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button | |||
* Vo = Volume, Mut = Mute | |||
*/ | |||
KEYMAP_JIS_COMPACT( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||
TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, | |||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT, | |||
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,BTN2,BTN3,NO, RSFT, RSFT, | |||
LCTL,LGUI,LALT, LALT,BTN1,FN2, RALT, RALT,RGUI,APP, LGUI | |||
), | |||
/* 2: Cursor keys | |||
* ,-----------------------------------------------------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| | |||
* |-----------------------------------------------------------| | |||
* |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| | |||
* |-----------------------------------------------------------| | |||
* |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | | |||
* |-----------------------------------------------------------| | |||
* |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| | |||
* `-----------------------------------------------------------' | |||
*/ | |||
KEYMAP_JIS_COMPACT( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||
TAB, HOME,PGUP,UP, PGDN,END, HOME,PGDN,PGUP,END, NO, NO, NO, | |||
LCTL,HOME,LEFT,DOWN,RGHT,END, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, | |||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, RSFT, | |||
LCTL,LGUI,LALT, LALT,BTN1,BSPC,FN3, RALT,RGUI,APP, LGUI | |||
), | |||
/* 3: HHKB Fn layer */ | |||
KEYMAP_JIS_COMPACT( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, | |||
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,NO, ENT, | |||
LSFT,NO, NO, NO, NO, NO, NO, NO, END, PGDN,DOWN,RSFT, FN4, | |||
LCTL,LGUI,LALT, LALT,SPC, BSPC,NO, RALT,RGUI,APP, LGUI | |||
), | |||
/* 4: Number */ | |||
KEYMAP_JIS_COMPACT( | |||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||
TAB, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, | |||
LCTL,1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, ENT, | |||
LSFT,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, RSFT, | |||
LCTL,LGUI,LALT, LALT,FN5, BSPC,NO, RALT,RGUI,APP, LGUI | |||
), | |||
}; | |||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) | |||
{ | |||
return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); | |||
} | |||
uint8_t keymap_fn_layer(uint8_t fn_bits) | |||
{ | |||
return pgm_read_byte(&fn_layer[biton(fn_bits)]); | |||
} | |||
uint8_t keymap_fn_keycode(uint8_t fn_bits) | |||
{ | |||
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); | |||
} |
@@ -11,7 +11,6 @@ | |||
#ifndef __usbconfig_h_included__ | |||
#define __usbconfig_h_included__ | |||
#include "config_vusb.h" | |||
/* | |||
General Description: |
@@ -89,8 +89,9 @@ uint8_t ps2_error = PS2_ERR_NONE; | |||
void ps2_host_init(void) | |||
{ | |||
#ifdef PS2_INT_ENABLE | |||
PS2_INT_ENABLE(); | |||
#ifdef PS2_USE_INT | |||
PS2_INT_INIT(); | |||
PS2_INT_ON(); | |||
idle(); | |||
#else | |||
inhibit(); | |||
@@ -103,8 +104,8 @@ uint8_t ps2_host_send(uint8_t data) | |||
uint8_t res = 0; | |||
bool parity = true; | |||
ps2_error = PS2_ERR_NONE; | |||
#ifdef PS2_INT_DISABLE | |||
PS2_INT_DISABLE(); | |||
#ifdef PS2_USE_INT | |||
PS2_INT_OFF(); | |||
#endif | |||
/* terminate a transmission if we have */ | |||
inhibit(); | |||
@@ -144,8 +145,8 @@ uint8_t ps2_host_send(uint8_t data) | |||
res = ps2_host_recv_response(); | |||
ERROR: | |||
#ifdef PS2_INT_ENABLE | |||
PS2_INT_ENABLE(); | |||
#ifdef PS2_USE_INT | |||
PS2_INT_ON(); | |||
idle(); | |||
#else | |||
inhibit(); | |||
@@ -173,7 +174,7 @@ uint8_t ps2_host_recv_response(void) | |||
return data; | |||
} | |||
#ifndef PS2_INT_VECT | |||
#ifndef PS2_USE_INT | |||
uint8_t ps2_host_recv(void) | |||
{ | |||
return ps2_host_recv_response(); |