# | |||||
# Makefile for PJRC Teensy | |||||
# | |||||
# Target file name (without extension). | # Target file name (without extension). | ||||
TARGET = ps2_usb_pjrc | |||||
TARGET = ps2_usb | |||||
# Directory common source filess exist | # Directory common source filess exist | ||||
TOP_DIR = ../.. | TOP_DIR = ../.. | ||||
# Directory keyboard dependent files exist | # Directory keyboard dependent files exist | ||||
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | |||||
SRC = keymap.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
ps2.c | |||||
CONFIG_H = config_pjrc.h | |||||
# MCU name, you MUST set this to match the board you are using | # MCU name, you MUST set this to match the board you are using | ||||
# type "make clean" after changing this, so all files will be rebuilt | # type "make clean" after changing this, so all files will be rebuilt | ||||
EXTRAKEY_ENABLE = yes # Audio control and System control | EXTRAKEY_ENABLE = yes # Audio control and System control | ||||
NKRO_ENABLE = yes # USB Nkey Rollover | NKRO_ENABLE = yes # USB Nkey Rollover | ||||
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||||
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||||
# keyboard dependent files | |||||
SRC = keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
ifdef PS2_USE_USART | |||||
SRC += protocol/ps2_usart.c | |||||
OPT_DEFS += -DPS2_USE_USART | |||||
endif | |||||
ifdef PS2_USE_INT | |||||
SRC += protocol/ps2.c | |||||
OPT_DEFS += -DPS2_USE_INT | |||||
endif | |||||
ifdef PS2_USE_BUSYWAIT | |||||
SRC += protocol/ps2.c | |||||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||||
endif | |||||
#CONFIG_H = config_pjrc_usart.h | |||||
CONFIG_H = config.h | |||||
#---------------- Programming Options -------------------------- | #---------------- Programming Options -------------------------- |
# | |||||
# Makefile for PJRC Teensy | |||||
# | |||||
# Target file name (without extension). | # Target file name (without extension). | ||||
TARGET = ps2_usb_pjrc_usart | |||||
TARGET = ps2_usb_jis | |||||
# Directory common source filess exist | # Directory common source filess exist | ||||
TOP_DIR = ../.. | TOP_DIR = ../.. | ||||
# Directory keyboard dependent files exist | # Directory keyboard dependent files exist | ||||
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | |||||
SRC = keymap.c \ | |||||
matrix.c \ | |||||
led.c \ | |||||
ps2_usart.c | |||||
CONFIG_H = config_pjrc_usart.h | |||||
# MCU name, you MUST set this to match the board you are using | # MCU name, you MUST set this to match the board you are using | ||||
# type "make clean" after changing this, so all files will be rebuilt | # type "make clean" after changing this, so all files will be rebuilt | ||||
EXTRAKEY_ENABLE = yes # Audio control and System control | EXTRAKEY_ENABLE = yes # Audio control and System control | ||||
NKRO_ENABLE = yes # USB Nkey Rollover | NKRO_ENABLE = yes # USB Nkey Rollover | ||||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||||
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||||
PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||||
# keyboard dependent files | |||||
SRC = keymap_jis.c \ | |||||
matrix.c \ | |||||
led.c | |||||
ifdef PS2_USE_USART | |||||
SRC += protocol/ps2_usart.c | |||||
OPT_DEFS += -DPS2_USE_USART | |||||
endif | |||||
ifdef PS2_USE_INT | |||||
SRC += protocol/ps2.c | |||||
OPT_DEFS += -DPS2_USE_INT | |||||
endif | |||||
ifdef PS2_USE_BUSYWAIT | |||||
SRC += protocol/ps2.c | |||||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||||
endif | |||||
#CONFIG_H = config_pjrc_usart.h | |||||
CONFIG_H = config.h | |||||
#---------------- Programming Options -------------------------- | #---------------- Programming Options -------------------------- |
# | |||||
# Makefile for V-USB | |||||
# | |||||
# Target file name (without extension). | # Target file name (without extension). | ||||
TARGET = ps2_usb_vusb | TARGET = ps2_usb_vusb | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = keymap.c \ | SRC = keymap.c \ | ||||
matrix.c \ | matrix.c \ | ||||
led.c \ | |||||
ps2_usart.c | |||||
led.c | |||||
# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful. | |||||
SRC += protocol/ps2_usart.c | |||||
OPT_DEFS += -DPS2_USE_USART | |||||
CONFIG_H = config_vusb.h | |||||
CONFIG_H = config.h | |||||
# V-USB debug level: To use ps2_usart.c level must be 0 | # V-USB debug level: To use ps2_usart.c level must be 0 | ||||
# ps2_usart.c requires USART to receive PS/2 signal. | # ps2_usart.c requires USART to receive PS/2 signal. | ||||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||||
OPT_DEFS += -DDEBUG_LEVEL=0 | |||||
# MCU name, you MUST set this to match the board you are using | # MCU name, you MUST set this to match the board you are using |
PS/2 to USB keyboard converter | PS/2 to USB keyboard converter | ||||
============================== | ============================== | ||||
This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2. | |||||
This will works on USB AVR(ATMega32U4, AT90USB) or V-USB. | |||||
This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2. | |||||
This will works on USB AVR(ATMega32U4, AT90USB) or V-USB(ATMega168, 328...). | |||||
Features | Features | ||||
PS/2 signal handling implementations | PS/2 signal handling implementations | ||||
------------------------------------ | ------------------------------------ | ||||
Following three methods are used to implement PS/2 signal handling. | Following three methods are used to implement PS/2 signal handling. | ||||
a. Simple and stupid wait & read loop(intensive use of cycles) | |||||
This is implemented with (expected) portable C code for reference. See ps2.c. | |||||
b. Interrupt driven | |||||
See ps2_intr.c | |||||
c. Using USART hardware module(no cycle needed) | |||||
This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter. | |||||
See ps2_usart.c. | |||||
Build Converter | |||||
--------------- | |||||
Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock). | |||||
For a. Simple and stupid and b. Interrupt implementaion: | |||||
By default Clock is on PF0 and Data on PF1. | |||||
You can change this pin configuration by editing config_pjrc.h. | |||||
In this photo Vcc is yellow, GND is green, Data is red and Clock is black. | |||||
http://img17.imageshack.us/img17/7243/201101181933.jpg | |||||
For c. USART implementation: | |||||
In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2. | |||||
a. Simple and stupid busy-wait(ps2.c) | |||||
This is expected to implemented with portable C code for reference. | |||||
b. Interrupt driven(ps2.c) | |||||
Uses external interrupt to detect falling edge of clock line. | |||||
c. USART hardware module(ps2_usart.c) | |||||
Uses AVR USART engine to recevie PS/2 signal. Recomended and default. | |||||
This is required to work with V-USB, preceding two methods tend to | |||||
miss signal edges while V-USB handles USB. | |||||
To select method edit Makefile. | |||||
Connect Wires | |||||
------------- | |||||
In case of Teensy2.0(ATMega32U4): | |||||
0. Connect Vcc and GND. | |||||
1. Connect Clock and Data line. | |||||
For a. Clock is on PF0 and Data on PF1. | |||||
For b. Clock is on PD1 and Data on PD2. | |||||
For c. Clock is on PD5 and Data on PD2. | |||||
2. Optionally you need pull-up register. 1K-10K Ohm is OK. | |||||
To change pin configuration edit config.h. | |||||
Build Frimware | Build Frimware | ||||
1. Edit Makefile for build options and MCU setting. | 1. Edit Makefile for build options and MCU setting. | ||||
Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0. | Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0. | ||||
2. make | 2. make | ||||
Just type 'make' in a terminal. | |||||
Use '-f Makefile.pjrc_intr' option to use b. Interrupt. | |||||
Use '-f Makefile.pjrc_usart' option to use c. USART. | |||||
Use '-f Makefile.vusb' option to build V-USB converter. | |||||
3. program with Teensy Loader. | |||||
http://www.pjrc.com/teensy/loader.html | |||||
Just type `make` in a terminal. | |||||
Use `-f Makefile.vusb` option to build V-USB converter. | |||||
Use `-f Makefile.jis` option to use JIS keyboard. | |||||
3. program MCU. | |||||
In case of Teensy use `Teensy Loader`.(http://www.pjrc.com/teensy/loader.html) | |||||
Otherwise you want to use `avrdude` or `dfu-programmer`. | |||||
Demonstration of Features | Demonstration of Features | ||||
Keymap | Keymap | ||||
------ | ------ | ||||
You can change a keymap by editing code of keymap.c like following. | |||||
How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h. | |||||
To define keymap layer switching may needs a bit of your effort at this time. | |||||
/* Default Layer: plain keymap | |||||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. | |||||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| | |||||
* `---' `---------------' `---------------' `---------------' `-----------' `-----------' | |||||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| | |||||
* |-----------------------------------------------------------| |-----------| |---------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | | |||||
* |-----------------------------------------------------------| `-----------' |-----------| +| | |||||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | | |||||
* |-----------------------------------------------------------| ,---. |---------------| | |||||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | | |||||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | | |||||
* `-----------------------------------------------------------' `-----------' `---------------' | |||||
*/ | |||||
KEYMAP( | |||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, | |||||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, | |||||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, | |||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, | |||||
LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT | |||||
), | |||||
You can change a keymap by editing code of keymap. See common/keycode.h for key symbols. | |||||
V-USB Support | |||||
------------- | |||||
You can also use this converter on ATmega(168/328) with V-USB instead of Teensy. | |||||
The converter on V-USB lacks some features for now: USB NKRO and System/Media control. | |||||
Circuit | |||||
------- | |||||
+---+ +---------------+ | |||||
USB GND | | ATmega168 | | |||||
=== C3 | | | |||||
5V <-------+--------+---|Vcc,AVCC | PS/2 | |||||
R1 | | ==== | |||||
D- <----+--+-----R2-----|INT1 RXD|------->DATA | |||||
D+ <----|---+----R3-----|INT0 XCK|------->CLOCK | |||||
Z1 Z2 | | ->5V | |||||
GND<----+---+--+--+-----|GND | ->GND | |||||
| | | | | |||||
| C2-+--|XTAL1 | | |||||
| X1 | | | |||||
+--C3-+--|XTAL2 | | |||||
+---------------+ | |||||
R1: 1.5K Ohm | |||||
R2,R3: 68 Ohm | |||||
Z1,Z2: Zenner 3.6V | |||||
C1,C2: 22pF | |||||
C3: 0.1uF | |||||
X1: Crystal 20MHz(16MHz/12MHz) | |||||
EOF | EOF |
V-USB Support | |||||
============= | |||||
You can also use this converter on ATmega(168/328) with V-USB instead of Teensy. | |||||
The converter on V-USB lacks some features for now: USB NKRO and System/Media control. | |||||
To build a firmware use Makefile.vusb instead of Makefile. | |||||
Circuit | |||||
------- | |||||
+---+ +---------------+ | |||||
USB GND | | ATmega168 | | |||||
=== C3 | | | |||||
5V <-------+--------+---|Vcc,AVCC | PS/2 | |||||
R1 | | ==== | |||||
D- <----+--+-----R2-----|INT1 RXD|------->DATA | |||||
D+ <----|---+----R3-----|INT0 XCK|------->CLOCK | |||||
Z1 Z2 | | ->5V | |||||
GND<----+---+--+--+-----|GND | ->GND | |||||
| | | | | |||||
| C2-+--|XTAL1 | | |||||
| X1 | | | |||||
+--C3-+--|XTAL2 | | |||||
+---------------+ | |||||
R1: 1.5K Ohm | |||||
R2,R3: 68 Ohm | |||||
Z1,Z2: Zenner 3.6V | |||||
C1,C2: 22pF | |||||
C3: 0.1uF | |||||
X1: Crystal 20MHz(16MHz/12MHz) | |||||
This is my V-USB converter on breadboard. | |||||
[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG] | |||||
EOF |
/* | /* | ||||
Copyright 2011 Jun Wako <[email protected]> | |||||
Copyright 2012 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | This program is free software: you can redistribute it and/or modify | ||||
it under the terms of the GNU General Public License as published by | it under the terms of the GNU General Public License as published by | ||||
#ifndef CONFIG_H | #ifndef CONFIG_H | ||||
#define CONFIG_H | #define CONFIG_H | ||||
#include <avr/interrupt.h> | |||||
/* controller configuration */ | |||||
#include "controller_teensy.h" | |||||
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0x2233 | |||||
// TODO: share these strings with usbconfig.h | |||||
// Edit usbconfig.h to change these. | |||||
#define PRODUCT_ID 0x6512 | |||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define PRODUCT PS/2 keyboard converter | #define PRODUCT PS/2 keyboard converter | ||||
#define DESCRIPTION convert PS/2 keyboard to USB | #define DESCRIPTION convert PS/2 keyboard to USB | ||||
#endif | #endif | ||||
/* PS/2 lines */ | |||||
#ifdef PS2_USE_USART | |||||
#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) | |||||
/* XCK for clock line and RXD for data line */ | |||||
#define PS2_CLOCK_PORT PORTD | #define PS2_CLOCK_PORT PORTD | ||||
#define PS2_CLOCK_PIN PIND | #define PS2_CLOCK_PIN PIND | ||||
#define PS2_CLOCK_DDR DDRD | #define PS2_CLOCK_DDR DDRD | ||||
#define PS2_CLOCK_BIT 4 | |||||
#define PS2_CLOCK_BIT 5 | |||||
#define PS2_DATA_PORT PORTD | #define PS2_DATA_PORT PORTD | ||||
#define PS2_DATA_PIN PIND | #define PS2_DATA_PIN PIND | ||||
#define PS2_DATA_DDR DDRD | #define PS2_DATA_DDR DDRD | ||||
#define PS2_DATA_BIT 0 | |||||
#define PS2_DATA_BIT 2 | |||||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ | |||||
/* set DDR of CLOCK as input to be slave */ | |||||
#define PS2_USART_INIT() do { \ | |||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||||
UCSR1C = ((1 << UMSEL10) | \ | |||||
(3 << UPM10) | \ | |||||
(0 << USBS1) | \ | |||||
(3 << UCSZ10) | \ | |||||
(0 << UCPOL1)); \ | |||||
UCSR1A = 0; \ | |||||
UBRR1H = 0; \ | |||||
UBRR1L = 0; \ | |||||
} while (0) | |||||
#define PS2_USART_RX_INT_ON() do { \ | |||||
UCSR1B = ((1 << RXCIE1) | \ | |||||
(1 << RXEN1)); \ | |||||
} while (0) | |||||
#define PS2_USART_RX_POLL_ON() do { \ | |||||
UCSR1B = (1 << RXEN1); \ | |||||
} while (0) | |||||
#define PS2_USART_OFF() do { \ | |||||
UCSR1C = 0; \ | |||||
UCSR1B &= ~((1 << RXEN1) | \ | |||||
(1 << TXEN1)); \ | |||||
} while (0) | |||||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) | |||||
#define PS2_USART_RX_DATA UDR1 | |||||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) | |||||
#define PS2_USART_RX_VECT USART1_RX_vect | |||||
// Synchronous USART is used to receive data from keyboard. | |||||
// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK. | |||||
// NOTE: This is recomended strongly if you use V-USB library. | |||||
#define PS2_USE_USART | |||||
// External or Pin Change Interrupt is used to receive data from keyboard. | |||||
// Use INT1 or PCINTxx for PS/2 CLOCK line. see below. | |||||
//#define PS2_USE_INT | |||||
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) | |||||
/* XCK for clock line and RXD for data line */ | |||||
#define PS2_CLOCK_PORT PORTD | |||||
#define PS2_CLOCK_PIN PIND | |||||
#define PS2_CLOCK_DDR DDRD | |||||
#define PS2_CLOCK_BIT 4 | |||||
#define PS2_DATA_PORT PORTD | |||||
#define PS2_DATA_PIN PIND | |||||
#define PS2_DATA_DDR DDRD | |||||
#define PS2_DATA_BIT 0 | |||||
#ifdef PS2_USE_USART | |||||
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge | |||||
// set DDR of CLOCK as input to be slave | |||||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ | |||||
/* set DDR of CLOCK as input to be slave */ | |||||
#define PS2_USART_INIT() do { \ | #define PS2_USART_INIT() do { \ | ||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | ||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | ||||
#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0))) | #define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0))) | ||||
#define PS2_USART_RX_VECT USART_RX_vect | #define PS2_USART_RX_VECT USART_RX_vect | ||||
#endif | #endif | ||||
#endif | |||||
#ifdef PS2_USE_INT | #ifdef PS2_USE_INT | ||||
/* INT1 | |||||
/* uses INT1 for clock line(ATMega32U4) */ | |||||
#define PS2_CLOCK_PORT PORTD | |||||
#define PS2_CLOCK_PIN PIND | |||||
#define PS2_CLOCK_DDR DDRD | |||||
#define PS2_CLOCK_BIT 1 | |||||
#define PS2_DATA_PORT PORTD | |||||
#define PS2_DATA_PIN PIND | |||||
#define PS2_DATA_DDR DDRD | |||||
#define PS2_DATA_BIT 2 | |||||
#define PS2_INT_INIT() do { \ | #define PS2_INT_INIT() do { \ | ||||
EICRA |= ((1<<ISC11) | \ | EICRA |= ((1<<ISC11) | \ | ||||
(0<<ISC10)); \ | (0<<ISC10)); \ | ||||
EIMSK &= ~(1<<INT1); \ | EIMSK &= ~(1<<INT1); \ | ||||
} while (0) | } while (0) | ||||
#define PS2_INT_VECT INT1_vect | #define PS2_INT_VECT INT1_vect | ||||
*/ | |||||
#endif | |||||
/* PCINT20 */ | |||||
#define PS2_INT_INIT() do { \ | |||||
PCICR |= (1<<PCIE2); \ | |||||
} while (0) | |||||
#define PS2_INT_ON() do { \ | |||||
PCMSK2 |= (1<<PCINT20); \ | |||||
} while (0) | |||||
#define PS2_INT_OFF() do { \ | |||||
PCMSK2 &= ~(1<<PCINT20); \ | |||||
PCICR &= ~(1<<PCIE2); \ | |||||
} while (0) | |||||
#define PS2_INT_VECT PCINT2_vect | |||||
#ifdef PS2_USE_BUSYWAIT | |||||
#define PS2_CLOCK_PORT PORTF | |||||
#define PS2_CLOCK_PIN PINF | |||||
#define PS2_CLOCK_DDR DDRF | |||||
#define PS2_CLOCK_BIT 0 | |||||
#define PS2_DATA_PORT PORTF | |||||
#define PS2_DATA_PIN PINF | |||||
#define PS2_DATA_DDR DDRF | |||||
#define PS2_DATA_BIT 1 | |||||
#endif | #endif | ||||
#endif | #endif |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* controller configuration */ | |||||
#include "controller_teensy.h" | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6512 | |||||
#define MANUFACTURER t.m.k. | |||||
#define PRODUCT PS/2 keyboard converter | |||||
#define DESCRIPTION convert PS/2 keyboard to USB | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 32 // keycode bit: 3-0 | |||||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ | |||||
keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ | |||||
) | |||||
/* mouse keys */ | |||||
#ifdef MOUSEKEY_ENABLE | |||||
# define MOUSEKEY_DELAY_TIME 255 | |||||
#endif | |||||
/* PS/2 lines */ | |||||
#define PS2_CLOCK_PORT PORTF | |||||
#define PS2_CLOCK_PIN PINF | |||||
#define PS2_CLOCK_DDR DDRF | |||||
#define PS2_CLOCK_BIT 0 | |||||
#define PS2_DATA_PORT PORTF | |||||
#define PS2_DATA_PIN PINF | |||||
#define PS2_DATA_DDR DDRF | |||||
#define PS2_DATA_BIT 1 | |||||
#endif |
/* | |||||
Copyright 2012 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* controller configuration */ | |||||
#include "controller_teensy.h" | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6513 | |||||
#define MANUFACTURER t.m.k. | |||||
#define PRODUCT PS/2 keyboard converter(USART) | |||||
#define DESCRIPTION convert PS/2 keyboard to USB | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 32 // keycode bit: 3-0 | |||||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \ | |||||
keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \ | |||||
) | |||||
/* mouse keys */ | |||||
#ifdef MOUSEKEY_ENABLE | |||||
# define MOUSEKEY_DELAY_TIME 255 | |||||
#endif | |||||
/* PS/2 lines */ | |||||
#define PS2_CLOCK_PORT PORTD | |||||
#define PS2_CLOCK_PIN PIND | |||||
#define PS2_CLOCK_DDR DDRD | |||||
#define PS2_CLOCK_BIT 5 | |||||
#define PS2_DATA_PORT PORTD | |||||
#define PS2_DATA_PIN PIND | |||||
#define PS2_DATA_DDR DDRD | |||||
#define PS2_DATA_BIT 2 | |||||
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge | |||||
// set DDR of CLOCK as input to be slave | |||||
#define PS2_USART_INIT() do { \ | |||||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||||
UCSR1C = ((1 << UMSEL10) | \ | |||||
(3 << UPM10) | \ | |||||
(0 << USBS1) | \ | |||||
(3 << UCSZ10) | \ | |||||
(0 << UCPOL1)); \ | |||||
UCSR1A = 0; \ | |||||
UBRR1H = 0; \ | |||||
UBRR1L = 0; \ | |||||
} while (0) | |||||
#define PS2_USART_RX_INT_ON() do { \ | |||||
UCSR1B = ((1 << RXCIE1) | \ | |||||
(1 << RXEN1)); \ | |||||
} while (0) | |||||
#define PS2_USART_RX_POLL_ON() do { \ | |||||
UCSR1B = (1 << RXEN1); \ | |||||
} while (0) | |||||
#define PS2_USART_OFF() do { \ | |||||
UCSR1C = 0; \ | |||||
UCSR1B &= ~((1 << RXEN1) | \ | |||||
(1 << TXEN1)); \ | |||||
} while (0) | |||||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) | |||||
#define PS2_USART_RX_DATA UDR1 | |||||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) | |||||
#define PS2_USART_RX_VECT USART1_RX_vect | |||||
#endif |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* Keymap for PS/2 keyboard | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/pgmspace.h> | |||||
#include "usb_keycodes.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "keymap.h" | |||||
// Following macros help you to define a keymap with the form of actual keyboard layout. | |||||
/* US layout plus all other various keys */ | |||||
#define KEYMAP_ALL( \ | |||||
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ | |||||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ | |||||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ | |||||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ | |||||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ | |||||
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ | |||||
\ | |||||
K61, /* for European ISO */ \ | |||||
K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ | |||||
K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ | |||||
KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ | |||||
KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ | |||||
KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ | |||||
KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ | |||||
K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ | |||||
KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ | |||||
) { \ | |||||
{ KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ | |||||
{ KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \ | |||||
{ KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \ | |||||
{ KB_##K18, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \ | |||||
{ KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \ | |||||
{ KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \ | |||||
{ KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \ | |||||
{ KB_##K38, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \ | |||||
{ KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \ | |||||
{ KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ | |||||
{ KB_##K50, KB_##K51, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_##K57 }, \ | |||||
{ KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_##K5F }, \ | |||||
{ KB_NO, KB_##K61, KB_NO, KB_NO, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \ | |||||
{ KB_NO, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ | |||||
{ KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ | |||||
{ KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_##K90, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_##K95, KB_NO, KB_NO }, \ | |||||
{ KB_##K98, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \ | |||||
{ KB_##KA0, KB_##KA1, KB_NO, KB_##KA3, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \ | |||||
{ KB_##KA8, KB_NO, KB_NO, KB_##KAB, KB_NO, KB_NO, KB_NO, KB_##KAF }, \ | |||||
{ KB_##KB0, KB_NO, KB_##KB2, KB_NO, KB_##KB4, KB_NO, KB_NO, KB_##KB7 }, \ | |||||
{ KB_##KB8, KB_NO, KB_##KBA, KB_##KBB, KB_NO, KB_NO, KB_NO, KB_##KBF }, \ | |||||
{ KB_##KC0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_##KC8, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_##KCD, KB_NO, KB_NO }, \ | |||||
{ KB_##KD0, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \ | |||||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \ | |||||
{ KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \ | |||||
{ KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \ | |||||
} | |||||
/* JIS layout */ | |||||
#define KEYMAP_JIS( \ | |||||
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ | |||||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ | |||||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \ | |||||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \ | |||||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \ | |||||
K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \ | |||||
) \ | |||||
KEYMAP_ALL( \ | |||||
K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ | |||||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ | |||||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ | |||||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ | |||||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ | |||||
K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ | |||||
\ | |||||
NUBS, \ | |||||
K51, K13, K6A, K64, K67, \ | |||||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \ | |||||
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \ | |||||
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \ | |||||
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \ | |||||
MAIL, CALCULATOR, MY_COMPUTER, \ | |||||
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \ | |||||
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \ | |||||
) | |||||
#define KEYMAP_JIS_COMPACT( \ | |||||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, \ | |||||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, \ | |||||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, \ | |||||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, \ | |||||
K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94 \ | |||||
) \ | |||||
KEYMAP_ALL( \ | |||||
ESC,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12, PSCR,SLCK,BRK, \ | |||||
K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \ | |||||
K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, DEL, END, PGDN, P7, P8, P9, \ | |||||
K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, P4, P5, P6, PPLS, \ | |||||
K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, UP, P1, P2, P3, \ | |||||
K14,K9F,K11, K29, K91,KA7,KAF,K94, LEFT,DOWN,RGHT, P0, PDOT,PENT, \ | |||||
\ | |||||
NUBS, \ | |||||
K51, K13, K6A, K64, K67, \ | |||||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \ | |||||
SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \ | |||||
AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \ | |||||
MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \ | |||||
MAIL, CALCULATOR, MY_COMPUTER, \ | |||||
WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \ | |||||
WWW_STOP, WWW_REFRESH, WWW_FAVORITES \ | |||||
) | |||||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. | |||||
static const uint8_t PROGMEM fn_layer[] = { | |||||
1, // Fn0 | |||||
2, // Fn1 | |||||
1, // Fn2 | |||||
2, // Fn3 | |||||
3, // Fn4 | |||||
4, // Fn5 | |||||
0, // Fn6 | |||||
0 // Fn7 | |||||
}; | |||||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. | |||||
// See layer.c for details. | |||||
static const uint8_t PROGMEM fn_keycode[] = { | |||||
KB_SCLN, // Fn0 | |||||
KB_SLSH, // Fn1 | |||||
KB_BSPC, // Fn2 | |||||
KB_NO, // Fn3 | |||||
KB_NO, // Fn4 | |||||
KB_SPC, // Fn5 | |||||
KB_NO, // Fn6 | |||||
KB_NO // Fn7 | |||||
}; | |||||
// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode. | |||||
// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro. | |||||
// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS. | |||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* 0: JIS LAYOUT | |||||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. | |||||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| | |||||
* `---' `---------------' `---------------' `---------------' `-----------' `-----------' | |||||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| JY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -| | |||||
* |-----------------------------------------------------------| |-----------| |---------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret | |Del|End|PgD| | 7| 8| 9| | | |||||
* |------------------------------------------------------` | `-----------' |-----------| +| | |||||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| :| \| | | 4| 5| 6| | | |||||
* |-----------------------------------------------------------| ,---. |---------------| | |||||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3| | | |||||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||||
* |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | | |||||
* `-----------------------------------------------------------' `-----------' `---------------' | |||||
*/ | |||||
/* | |||||
KEYMAP_JIS( | |||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, | |||||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, END, PGDN, P7, P8, P9, | |||||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, ENT, P4, P5, P6, PPLS, | |||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, UP, P1, P2, P3, | |||||
LCTL,LGUI,LALT, MHEN,SPC, HENK,KANA, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT | |||||
), | |||||
*/ | |||||
/* 0: HHKB-wise | |||||
* ,-----------------------------------------------------------. | |||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bsp | | |||||
* |------------------------------------------------------` | | |||||
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| :|Ret| | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
KEYMAP_JIS_COMPACT( | |||||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC, | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, | |||||
LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT,GRV, ENT, | |||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, FN4, | |||||
LCTL,LGUI,LALT, LALT,FN5, FN2, FN3, RALT,RGUI,APP, LGUI | |||||
), | |||||
/* 1: Mouse keys | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| | |||||
* |-----------------------------------------------------------| | |||||
* |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl| | |||||
* `-----------------------------------------------------------' | |||||
* Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button | |||||
* Vo = Volume, Mut = Mute | |||||
*/ | |||||
KEYMAP_JIS_COMPACT( | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||||
TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, | |||||
LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT, | |||||
LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,BTN2,BTN3,NO, RSFT, RSFT, | |||||
LCTL,LGUI,LALT, LALT,BTN1,FN2, RALT, RALT,RGUI,APP, LGUI | |||||
), | |||||
/* 2: Cursor keys | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| | |||||
* |-----------------------------------------------------------| | |||||
* |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
KEYMAP_JIS_COMPACT( | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||||
TAB, HOME,PGUP,UP, PGDN,END, HOME,PGDN,PGUP,END, NO, NO, NO, | |||||
LCTL,HOME,LEFT,DOWN,RGHT,END, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, | |||||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, RSFT, | |||||
LCTL,LGUI,LALT, LALT,BTN1,BSPC,FN3, RALT,RGUI,APP, LGUI | |||||
), | |||||
/* 3: HHKB Fn layer */ | |||||
KEYMAP_JIS_COMPACT( | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,NO, ENT, | |||||
LSFT,NO, NO, NO, NO, NO, NO, NO, END, PGDN,DOWN,RSFT, FN4, | |||||
LCTL,LGUI,LALT, LALT,SPC, BSPC,NO, RALT,RGUI,APP, LGUI | |||||
), | |||||
/* 4: Number */ | |||||
KEYMAP_JIS_COMPACT( | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, INS, DEL, | |||||
TAB, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, | |||||
LCTL,1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, ENT, | |||||
LSFT,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, RSFT, | |||||
LCTL,LGUI,LALT, LALT,FN5, BSPC,NO, RALT,RGUI,APP, LGUI | |||||
), | |||||
}; | |||||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) | |||||
{ | |||||
return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); | |||||
} | |||||
uint8_t keymap_fn_layer(uint8_t fn_bits) | |||||
{ | |||||
return pgm_read_byte(&fn_layer[biton(fn_bits)]); | |||||
} | |||||
uint8_t keymap_fn_keycode(uint8_t fn_bits) | |||||
{ | |||||
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); | |||||
} |
#ifndef __usbconfig_h_included__ | #ifndef __usbconfig_h_included__ | ||||
#define __usbconfig_h_included__ | #define __usbconfig_h_included__ | ||||
#include "config_vusb.h" | |||||
/* | /* | ||||
General Description: | General Description: |
void ps2_host_init(void) | void ps2_host_init(void) | ||||
{ | { | ||||
#ifdef PS2_INT_ENABLE | |||||
PS2_INT_ENABLE(); | |||||
#ifdef PS2_USE_INT | |||||
PS2_INT_INIT(); | |||||
PS2_INT_ON(); | |||||
idle(); | idle(); | ||||
#else | #else | ||||
inhibit(); | inhibit(); | ||||
uint8_t res = 0; | uint8_t res = 0; | ||||
bool parity = true; | bool parity = true; | ||||
ps2_error = PS2_ERR_NONE; | ps2_error = PS2_ERR_NONE; | ||||
#ifdef PS2_INT_DISABLE | |||||
PS2_INT_DISABLE(); | |||||
#ifdef PS2_USE_INT | |||||
PS2_INT_OFF(); | |||||
#endif | #endif | ||||
/* terminate a transmission if we have */ | /* terminate a transmission if we have */ | ||||
inhibit(); | inhibit(); | ||||
res = ps2_host_recv_response(); | res = ps2_host_recv_response(); | ||||
ERROR: | ERROR: | ||||
#ifdef PS2_INT_ENABLE | |||||
PS2_INT_ENABLE(); | |||||
#ifdef PS2_USE_INT | |||||
PS2_INT_ON(); | |||||
idle(); | idle(); | ||||
#else | #else | ||||
inhibit(); | inhibit(); | ||||
return data; | return data; | ||||
} | } | ||||
#ifndef PS2_INT_VECT | |||||
#ifndef PS2_USE_INT | |||||
uint8_t ps2_host_recv(void) | uint8_t ps2_host_recv(void) | ||||
{ | { | ||||
return ps2_host_recv_response(); | return ps2_host_recv_response(); |