@@ -71,7 +71,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# *Comment out* to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) |
@@ -1,10 +1,12 @@ | |||
M0110/M0110A to USB keyboard converter | |||
====================================== | |||
This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB. | |||
Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though, | |||
you can use other board with USB AVR like `ATmega32U4` and `AT90USB`. | |||
This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. | |||
Pics of **M0110 + M0120** and **M0110A**. | |||
![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg) | |||
![M0110A](http://i.imgur.com/HuHOEoHm.jpg) | |||
![M0110](https://raw.github.com/tmk/tmk_keyboard/master/converter/m0110_usb/doc/m0110.jpg) | |||
- M0110A support was contributed by [skagon@github](https://github.com/skagon). | |||
- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys. | |||
@@ -13,49 +15,42 @@ you can use other board with USB AVR like `ATmega32U4` and `AT90USB`. | |||
Update | |||
------ | |||
- 2013/08 Change port for signals PF to PD | |||
- 2013/08: Change port for signals `PF` to `PD` | |||
- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. | |||
Connection | |||
---------- | |||
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard. | |||
Teensy port `PD0` is assigned for `CLOCK` line and `PD1` for `DATA` by default, | |||
you can change pin configuration with editing *config.h*. | |||
Building Hardware | |||
----------------- | |||
You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. | |||
You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection | |||
while Macintosh keyboard cable is *straight*. | |||
[![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg) | |||
[![Conection](https://raw.github.com/tmk/tmk_keyboard/master/converter/m0110_usb/doc/teensy.jpg)] | |||
### 4P4C phone handset cable | |||
Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. | |||
In this pic: | |||
<http://en.wikipedia.org/wiki/Modular_connector#4P4C> | |||
1. `GND`(Black) | |||
2. `CLOCK`(Red) | |||
3. `DATA`(Green) | |||
4. `+5V`(Yellow) | |||
Close-up pic of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. | |||
[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) | |||
Note that wire colors may vary in your cable. | |||
[Teensy]: http://www.pjrc.com/teensy/ | |||
### Pinout | |||
### Socket Pinout | |||
- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml> | |||
- <http://en.wikipedia.org/wiki/Modular_connector#4P4C> | |||
![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) | |||
### Pull-up Registor | |||
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular | |||
when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose. | |||
In some cases MCU can't read signal from keyboard correctly without pull-up resistors. | |||
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. | |||
Building Frimware | |||
----------------- | |||
To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows. | |||
You can edit *Makefile* and *config.h* to change compile options and pin configuration. | |||
To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. | |||
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source) | |||
$ cd m0110_usb | |||
@@ -71,64 +66,69 @@ Keymap | |||
You can change keymaps by editing *keymap.c*. | |||
### M0110 & M0120 | |||
#### *Default* | |||
,---------------------------------------------------------. ,---------------. | |||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| -|Lft|Rgt| | |||
|---------------------------------------------------------| |---------------| | |||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up| | |||
|---------------------------------------------------------| |---------------| | |||
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| Dn| | |||
|---------------------------------------------------------| |---------------| | |||
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | | |||
`---------------------------------------------------------' |-----------|Ent| | |||
|Ctl|Alt | Space |Gui |Ctl| | 0| .| | | |||
`-----------------------------------------------' `---------------' | |||
#### *HHKB/WASD Layer(WASD/IJKL)* | |||
,---------------------------------------------------------. ,---------------. | |||
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt| | |||
|---------------------------------------------------------| |---------------| | |||
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau|Ins| | 7| 8| 9| Up| | |||
|---------------------------------------------------------| |---------------| | |||
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| Dn| | |||
|---------------------------------------------------------| |---------------| | |||
|Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| | | |||
`---------------------------------------------------------' |-----------|Ent| | |||
|Ctl|Alt | Space |Gui |Ctl| | 0| .| | | |||
`-----------------------------------------------' `---------------' | |||
#### *Default Layer* | |||
,---------------------------------------------------------. ,---------------. | |||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -|Lft|Rgt| | |||
|---------------------------------------------------------| |---------------| | |||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up| | |||
|---------------------------------------------------------| |---------------| | |||
|Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| Dn| | |||
|---------------------------------------------------------| |---------------| | |||
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | | |||
`---------------------------------------------------------' |-----------|Ent| | |||
|Ctl|Gui | Space |Alt |Ctl| | 0| .| | | |||
`-----------------------------------------------' `---------------' | |||
- `Space` and `Enter` also work as `Fn` layer switch key when holding down. | |||
#### *Function Layer(WASD/HHKB)* | |||
,---------------------------------------------------------. ,---------------. | |||
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt| | |||
|---------------------------------------------------------| |---------------| | |||
|Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \| | 7| 8| 9| Up| | |||
|---------------------------------------------------------| |---------------| | |||
|Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| Dn| | |||
|---------------------------------------------------------| |---------------| | |||
|Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | | |||
`---------------------------------------------------------' |-----------|Ent| | |||
|Ctl|Gui | Space |Alt |Ctl| | 0| .| | | |||
`-----------------------------------------------' `---------------' | |||
### M0110A | |||
#### *Default* | |||
#### *Default Layer* | |||
,---------------------------------------------------------. ,---------------. | |||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *| | |||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| | |||
|---------------------------------------------------------| |---------------| | |||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| | |||
|-----------------------------------------------------' | |---------------| | |||
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| | |||
|Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| | |||
|---------------------------------------------------------| |---------------| | |||
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| | | |||
|---------------------------------------------------------| |-----------|Ent| | |||
|Alt |Gui | Space | \|Lft|Rgt| Dn| | 0| .| | | |||
|Ctrl |Gui | Space | \|Lft|Rgt|Dwn| | 0| .| | | |||
`---------------------------------------------------------' `---------------' | |||
#### *Cursor Layer(WASD/IJKL)* | |||
- `Space` and `Enter` also work as `Fn` layer switch key when holding down. | |||
- `Backslash(\)` also works as `Alt` when holding down. | |||
#### *Function Layer(WASD/HHKB)* | |||
,---------------------------------------------------------. ,---------------. | |||
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| | |||
|---------------------------------------------------------| |---------------| | |||
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -| | |||
|Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| | |||
|-----------------------------------------------------' | |---------------| | |||
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +| | |||
|Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| | |||
|---------------------------------------------------------| |---------------| | |||
|Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| | | |||
|Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | | |||
|---------------------------------------------------------| |-----------|Ent| | |||
|Alt |Gui | Space |Ins|Hom|End|PgD| | 0| .| | | |||
|Ctrl |Gui | Space | \|Hom|End|PgD| | 0| .| | | |||
`---------------------------------------------------------' `---------------' | |||
Debug | |||
----- | |||
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. | |||
The converter has some functions for debug, press `<magickey>+H` simultaneously to get help. | |||
These function is totally undocumented, tentative, inconsistent and buggy. | |||
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Command>+H` simultaneously to get help. | |||
magickey: Shift+Option+Command(Shift+Alt+Gui or Shift+Alt+Control) | |||
- Command: `Shift+Option+Command`(`Shift+Alt+Gui` or `Shift+Alt+Control`) |
@@ -32,10 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
#define MATRIX_COLS 8 | |||
/* legacy keymap support */ | |||
#define USE_LEGACY_KEYMAP | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
@@ -48,15 +44,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LCTL)) \ | |||
) | |||
/* boot magic key */ | |||
#define BOOTMAGIC_KEY_SALT KC_FN0 | |||
#define BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL KC_LCAP | |||
/* ports */ | |||
#define M0110_CLOCK_PORT PORTD | |||
#define M0110_CLOCK_PIN PIND | |||
#define M0110_CLOCK_DDR DDRD | |||
#define M0110_CLOCK_BIT 0 | |||
#define M0110_CLOCK_BIT 1 | |||
#define M0110_DATA_PORT PORTD | |||
#define M0110_DATA_PIN PIND | |||
#define M0110_DATA_DDR DDRD | |||
#define M0110_DATA_BIT 1 | |||
#define M0110_DATA_BIT 0 | |||
#endif |
@@ -44,7 +44,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* |---------------------------------------------------------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| | |||
* |-----------------------------------------------------' | |---------------| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | | |||
* |---------------------------------------------------------' |-----------|Ent| | |||
@@ -57,7 +57,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* |---------------------------------------------------------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| ,| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | | |||
* `---------------------------------------------------------' |-----------|Ent| | |||
@@ -77,7 +77,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* |---------------------------------------------------------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| | |||
* |-----------------------------------------------------' | |---------------| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | | |||
* |---------------------------------------------------------| |-----------|Ent| | |||
@@ -108,89 +108,79 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
{ KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ | |||
} | |||
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) | |||
// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. | |||
static const uint8_t PROGMEM fn_layer[] = { | |||
1, // Fn0 | |||
0, // Fn1 | |||
0, // Fn2 | |||
0, // Fn3 | |||
0, // Fn4 | |||
0, // Fn5 | |||
0, // Fn6 | |||
0 // Fn7 | |||
}; | |||
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. | |||
// See layer.c for details. | |||
static const uint8_t PROGMEM fn_keycode[] = { | |||
KC_NO, // Fn0 | |||
KC_NO, // Fn1 | |||
KC_NO, // Fn2 | |||
KC_NO, // Fn3 | |||
KC_NO, // Fn4 | |||
KC_NO, // Fn5 | |||
KC_NO, // Fn6 | |||
KC_NO // Fn7 | |||
}; | |||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { | |||
#else | |||
static const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { | |||
#endif | |||
/* Default: | |||
* ,---------------------------------------------------------. ,---------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *| | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| | |||
* |-----------------------------------------------------' | |---------------| | |||
* |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | | |||
* |---------------------------------------------------------| |-----------|Ent| | |||
* |Ctl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| | | |||
* |Ctl |Gui | Space |Alt| \|Lft|Rgt|Dn | | 0| .| | | |||
* `---------------------------------------------------------' `---------------' | |||
*/ | |||
KEYMAP( | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LCTL,EQL, PSLS,PAST, | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, CLR, EQL, PSLS,PAST, | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, | |||
FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, | |||
LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, FN1, P4, P5, P6, PPLS, | |||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, | |||
LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT | |||
LCTL,LGUI, FN0, LALT,FN2, LEFT,RGHT,DOWN, P0, PDOT | |||
), | |||
/* Cursor Layer(WASD, IJKL) | |||
* ,---------------------------------------------------------. ,---------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -| | |||
* |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| | |||
* |-----------------------------------------------------' | |---------------| | |||
* |Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +| | |||
* |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| | |||
* |---------------------------------------------------------| |---------------| | |||
* |Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| | | |||
* |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | | |||
* |---------------------------------------------------------| |-----------|Ent| | |||
* |Ctl |Alt | Space |Gui |Ins|Hom|End|PgD| | 0| .| | | |||
* |Ctl |Gui | Space |Alt | \|Hom|End|PgD| | 0| .| | | |||
* `---------------------------------------------------------' `---------------' | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, | |||
CAPS,HOME,UP, PGUP,NO, NO, NO, PGUP,UP, HOME,PSCR,SLCK,PAUS, P7, P8, P9, PMNS, | |||
FN0, LEFT,DOWN,RGHT,NO, NO, NO, LEFT,DOWN,RGHT,NO, NO, ENT, P4, P5, P6, PPLS, | |||
LSFT,END, NO, PGDN,NO, NO, NO, PGDN,NO, END, NO, PGUP, P1, P2, P3, PENT, | |||
LCTL,LALT, SPC, LGUI,INS, HOME,END, PGDN, P0, PDOT | |||
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, | |||
LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN1, P4, P5, P6, PPLS, | |||
LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, | |||
LCTL,LGUI, FN0, LALT,FN2, HOME,END, PGDN, P0, PDOT | |||
), | |||
}; | |||
uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) | |||
{ | |||
return KEYCODE(layer, row, col); | |||
} | |||
/* | |||
* Fn action definition | |||
*/ | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { | |||
#else | |||
static const uint16_t fn_actions[] PROGMEM = { | |||
#endif | |||
[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), // Layer switch with Tap key Space | |||
[1] = ACTION_LAYER_TAP_KEY(1, KC_ENTER), // Layer switch with Tap key Enter | |||
[2] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_BSLS), // LALT with Tap key Backslash | |||
}; | |||
uint8_t keymap_fn_layer(uint8_t index) | |||
/* translates key to keycode */ | |||
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) | |||
{ | |||
return pgm_read_byte(&fn_layer[index]); | |||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||
} | |||
uint8_t keymap_fn_keycode(uint8_t index) | |||
/* translates Fn index to action */ | |||
action_t keymap_fn_to_action(uint8_t keycode) | |||
{ | |||
return pgm_read_byte(&fn_keycode[index]); | |||
action_t action; | |||
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); | |||
return action; | |||
} |
@@ -91,10 +91,11 @@ uint8_t m0110_error = 0; | |||
void m0110_init(void) | |||
{ | |||
uint8_t data; | |||
idle(); | |||
_delay_ms(1000); | |||
/* Not needed to initialize in fact. | |||
uint8_t data; | |||
m0110_send(M0110_MODEL); | |||
data = m0110_recv(); | |||
print("m0110_init model: "); phex(data); print("\n"); | |||
@@ -102,6 +103,7 @@ void m0110_init(void) | |||
m0110_send(M0110_TEST); | |||
data = m0110_recv(); | |||
print("m0110_init test: "); phex(data); print("\n"); | |||
*/ | |||
} | |||
uint8_t m0110_send(uint8_t data) |