@@ -0,0 +1,135 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = 60percent09 | |||
# Directory common source filess exist | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = matrix.c \ | |||
led.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_60percent09.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega328p | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=2048 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
#COMMAND_ENABLE = no # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA | |||
#BACKLIGHT_ENABLE = no | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TMK_DIR)/protocol.mk | |||
include $(TMK_DIR)/common.mk | |||
include $(TMK_DIR)/protocol/vusb.mk | |||
include $(TMK_DIR)/rules.mk |
@@ -0,0 +1,86 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0A0C | |||
#define DEVICE_VER 0x6009 | |||
#define MANUFACTURER di0ib | |||
#define PRODUCT 60percent09 Keyboard | |||
#define DESCRIPTION A compact keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 12 | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 4 | |||
/* define if matrix has ghost */ | |||
#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* ws2812 RGB LED */ | |||
#define ws2812_PORTREG PORTB | |||
#define ws2812_DDRREG DDRB | |||
#define ws2812_pin PB2 | |||
#define RGBLED_NUM 3 // Number of LEDs | |||
#ifndef RGBLIGHT_HUE_STEP | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#endif | |||
#ifndef RGBLIGHT_SAT_STEP | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#endif | |||
#ifndef RGBLIGHT_VAL_STEP | |||
#define RGBLIGHT_VAL_STEP 17 | |||
#endif | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@@ -0,0 +1,61 @@ | |||
#include "keymap_common.h" | |||
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
KEYMAP( | |||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, | |||
GRV, Q, W, E, R, T, Y, U, I, O, P, DELETE, | |||
FN2, A, S, D, F, G, H, J, K, L, SCLN, QUOT, | |||
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN3, | |||
LCTL, LALT, LGUI, APP, FN1, SPC, SPC, FN0, LEFT, DOWN, UP, RGHT | |||
), | |||
KEYMAP( | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DELETE, | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, | |||
TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, | |||
TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END | |||
), | |||
KEYMAP( | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||
FN6, FN7, FN8, FN9, FN10, FN11, FN12, FN13, FN14, FN15, FN16, DELETE, | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN17, FN18, FN19, FN20, FN21, | |||
TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, | |||
TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END | |||
), | |||
KEYMAP( /* Tab */ | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||
ESC, CALC, WHOM, MAIL, MYCM, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, TRNS, | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, | |||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MS_L, MS_D, MS_U, MS_R | |||
), | |||
}; | |||
const action_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_LAYER_MOMENTARY(1), | |||
[1] = ACTION_LAYER_MOMENTARY(2), | |||
[2] = ACTION_LAYER_TAP_KEY(3, KC_TAB), | |||
[3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), | |||
[6] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), | |||
[7] = ACTION_MODS_KEY(MOD_LSFT, KC_1), | |||
[8] = ACTION_MODS_KEY(MOD_LSFT, KC_2), | |||
[9] = ACTION_MODS_KEY(MOD_LSFT, KC_3), | |||
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_4), | |||
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_5), | |||
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_6), | |||
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_7), | |||
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_8), | |||
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_9), | |||
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_0), | |||
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), | |||
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), | |||
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), | |||
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), | |||
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), | |||
}; | |||
@@ -0,0 +1,49 @@ | |||
/* | |||
Copyright 2012,2013 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef KEYMAP_COMMON_H | |||
#define KEYMAP_COMMON_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include "keycode.h" | |||
#include "action.h" | |||
#include "action_macro.h" | |||
#include "report.h" | |||
#include "host.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "keymap.h" | |||
#define KEYMAP( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, \ | |||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b \ | |||
) \ | |||
{ \ | |||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b }, \ | |||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b }, \ | |||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b }, \ | |||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b }, \ | |||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4a, KC_##K4b } \ | |||
} | |||
#endif |
@@ -0,0 +1,25 @@ | |||
/* | |||
Copyright 2012 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
void led_set(uint8_t usb_led) | |||
{ | |||
} |