tmk
c2d830c07c
USB initialize when plug-in during battery powered
9年前
tmk
8f5f25fcd5
Revert lufa/lufa.c
9年前
Robin Haberkorn
7dde35d4f7
integrated serial mouse drivers as a feature into the firmware architecture
* can be enabled by defining Makefile macro SERIAL_MOUSE_MICROSOFT_ENABLE or
SERIAL_MOUSE_MOUSESYSTEMS_ENABLE.
* Serial implementation can be chosen via SERIAL_MOUSE_USE_SOFT and
SERIAL_MOUSE_USE_UART macros
* UART configuration still has to be done in config.h: I added working clauses
for both mouse protocols to ps2_usb's config.h
9年前
tmk
32997200f7
Fix NKRO code when NKRO is disable
9年前
tmk
abe5edcaa7
Fix set LED for NKRO keyboard interface
10年前
tmk
b03717a10c
Unused endpoint of console OUT is commentout'd
10年前
tmk
22854eb71b
NKRO is disable when SET_PROTOCOL(boot)
- Command can force to enable NKRO even when boot mode
- After boot keyboard may be in boot mode due to BIOS' request
10年前
tmk
5e3f2d2b2e
Make NKRO deafult when it is available
- NKRO is used only when keyboard_protocol = 1(report)
10年前
tmk
ad4cba172b
Move macro definitions from lufa.c to lufa.h
10年前
tmk
a5d4a1f3e1
Return when ready check loop is timeouted(Fix #115)
10年前
tmk
532e100450
Add ps2_usart.c and fix set_led at USB wake
10年前
tmk
9d40be1990
Wait for USB starting up to make debug print available
10年前
tmk
d267ee2ada
Fix LUFA blocking during startup
- Blocking occurs if built without option INTERRUPT_CONTROL_ENDPOINT
10年前
tmk
7d692c492c
Fix USB initilaize on LUFA
- Add print messages of USB intialize procesure.
- call out sei() in earlier stage. LUFA API doc of USB_Init() says:
interrupts must be enabled within 500ms ... to ensure that the host does
not time out whilst enumerating the device
- remove matrix_init() from suspend_wakeup_init(). It is not needed in
fact and if matrix_init() takes long time to initialize it prevents
host emnumerating the device.
10年前
tmk
daa4a4235f
Add NKRO support for LUFA
10年前
tmk
1eb67303ee
Fix LUFA host driver for unconfigured state
11年前
tmk
afc3148e23
Add supsend and wakeup to pjrc stack
11年前
tmk
f0c5f1b910
Add breathing sleep LED during USB suspend
11年前
tmk
42f6ff0886
Add power down mode sleep and watchdog interrupt
11年前
tmk
c8cfde0138
Add intial code of RemoteWakeUp
11年前
tmk
e9e4c0edc5
Add support for LUFA-120730
11年前
tmk
16a583d7fd
Fix usage of debug flag
11年前
tmk
4ae979f6ef
Initial version of new code for layer switch is added.
11年前
tmk
45ea1874d6
Fix timeout logic of LUFA sendchar(), sned_*().
11年前
tmk
c5060ea819
test build of 'Host shield' in minimal env.
11年前
tmk
7350b7c6aa
Fix the way of sending out IN packet.
This fixes problem that it losts keycode when send keycodes in row in layer.c.
Undef CONSOLE_ENABLE build option makes this problem clear.
11年前
tmk
e075361b6f
Add CONSOLE_ENABLE build option to LUFA.
12年前
tmk
8947029950
Interrupt driven Control ep and Console task
12年前
tmk
a112f3614e
confirm SetReport LED.
12年前
tmk
f2ebac101d
Add conditional compile for MOUSE_ENABLE and EXTRAKEY_ENABLE.
12年前
tmk
cc68adeb57
Add protocol/lufa. LUFA supported now.
12年前
tmk
3d81d5221e
Add consumer/system control feature to LUFA.
12年前
tmk
a9a3610dd4
Add LUFA mouse feature and fix mouse report.
- add LUFA boot mouse feature
- remove report_id from mouse report
- fix LUFA descriptor
12年前
tmk
effa5914bf
clean descriptor setting. Remove keyboard OUT Endpoint.
- to make descriptor get VID/PID/Version from config.h.
- remove keyboard out endpoint. Instead host can use control request.
12年前
tmk
3969ec09b4
Add sendchar with Generic HID to support debug print.
12年前
tmk
dd93d2915f
initial attempt for LUFA.
Add keyboard/lufa macway keyobard with LUFA.
Add new program target to rule.mk; flip, dfu and teensy
12年前