Keyboard firmwares for Atmel AVR and Cortex-M
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
di0ib ac70ea56ae Update hace 3 años
pcb Update hace 3 años
FLASH.bin mf68 hace 3 años
GNAP.jpg GNAP keyboard hace 3 años
LED_FastGPIO.ino GNAP keyboard hace 3 años
Makefile GNAP keyboard hace 3 años
config.h GNAP keyboard hace 3 años
gnap.bin mf68 hace 3 años
keymap_common.h i75, cleanup keymaps hace 3 años
keymap_gnap.c update keymap hace 3 años
led.c mf68 hace 3 años
matrix.c i75, cleanup keymaps hace 3 años
pcb-front.png GNAP keyboard hace 3 años Update readme hace 3 años
schematic.png GNAP keyboard hace 3 años

GNAP! keyboard firmware

GNAP! 1.0 Assembled

GNAP! dual matrix, dual controller. Per key LED control, reactive lighting. GNAP! 1.0 PCB Front GNAP! 1.0 PCB Schematic

Dual Pro Micro’s. One running TMK, the other running an Arduino sketch driving the LEDs. Pro Micro’s are connected to each other via hardware serial UART.


Rows D1, D0, D4, C6 
Cols D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4

keymap_gnap.c contains functions to send bytes to the LED controller. The Arduino code interprets these to change modes or brightness.

//GNAP keymap functions
void gnaplight_step(void) {

void gnaplight_toggle(void) {

\tmk_core\common\keyboard.c was modified to send the row/column of the key being pressed encoded as as single byte over the serial link to the LED controller.

                //send single byte with value of row column

The example Arduino sketch LED_FastGPIO.ino uses the fastGPIO and TimerOne libraries. These can be installed with the Library manager.

FastGPIO TimerOne