Keyboard firmwares for Atmel AVR and Cortex-M
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.
tmk 7860d09914 Change TMK_DIR setting vor 9 Jahren
..
Makefile Change TMK_DIR setting vor 9 Jahren
README Spellchecking converter README files. vor 10 Jahren
config.h Add ascii_usb ASCII Serial Console terminal converter vor 10 Jahren
keymap.c Change key_t to keypos_t vor 9 Jahren
led.c Add ascii_usb ASCII Serial Console terminal converter vor 10 Jahren
matrix.c Add ascii_usb ASCII Serial Console terminal converter vor 10 Jahren

README

ASCII to USB keyboard protocol converter
========================================
This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
Target MCU is ATMega32u4 but other USB capable AVR will also work.


Hardware
--------
Connect RX, TX and GND to UART pin of AVR. Note that you may need line driver/level shifter like MAX232 to interface high voltage of RS-232C.



Build Firmware
--------------
Configure UART setting and Just use 'make'

$ cd ascii_usb
$ make

Then, load the binary to MCU with your favorite programmer.



Limitation
----------
- This cannot see key up event, you cannot hold a key.
- Alt, Gui(Win/Mac) modifier key are not available.



TRS-80 model 100
----------------
Use TELCOM program with setting: 19200bps/8bit/odd parity/1stop bit
To set this configuration push Stat(F3) and input '9801D,10'. Then push Term(F4) to connect.