1
0
tmk_keyboard/keyboard/hhkb/README.md

139 lines
4.9 KiB
Markdown

Alternative Controller for HHKB Pro
===================================
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
controller with programmable one. This controller can work with HHKB Professional and Professional 2 model.
See [this thread][AltController] in geekhack.org.
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
[AltController]: http://geekhack.org/index.php?topic=12047.0
##Features
* Customizable keymap
* More keymap layers(more Fn keys)
* Mouse keys
* USB NKRO
See README of [tmk_keyboard] for more.
[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
###Pros
* No risks: Everything is all reversible
* No need for PCB trace patching, case cutting or any other destructive mod
* Can keep original controller intact
* Can change all HHKB behaviour as you like
###Cons
* Void your warranty
* Lose USB hub function of Pro2
##DISCLAIMER
I'm not a professional of electronics nor MCU programming. This may damage your HHKB.
And my English writing is poor, I'm not sure I can convey my notions accurately.
##Documents
See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller.
##Build Firmware & Program
See [this document](../../doc/build.md) first.
### Configuration
Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`.
### Build
Just run make after intall tools.
$ make
Use `Makefile.pjrc` if you want to use PJRC stack instead of LUFA.(LUFA is recommended.)
$ make -f Makefile.pjrc
Use `Makefile.vusb` for [V-USB] controller.(not supported actively any more.)
$ make -f Makefile.vusb
### Program
First, push reset button on board to start bootloader.
This command programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
$ make dfu
Or you can also use [FLIP] command to program. Also the tool should be intalled and configured properly. FLIP GUI app is also available.
$ make flip
Use [Teensy Loader] if your controller is Teensy/Teensy++.
##How to Customize
See [tmk_keyboard] documents.
##Hardware
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with [V-USB] library is also cheapear option for DIY.
###1. TMK Alt Controller Board
TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
###2. PJRC Teensy++ 2.0 connection
+---------------+
| Teensy++ |
| |
| | HHKB pro HHKB pro2
| | ~~~~~~~~ ~~~~~~~~~
| PB0-2|------->ROW (6-8) (5-7)
| PB3-5|------->COL (9-11) (8-10)
| PB6|------->ENABLE (12) (11)
| PE6|<-------KEY (4) (3)
| PE7|------->PREV (5) (4)
| |
| | 5V--- (1-3) (1-2)
| | GND--- (13-14) (12-13)
+---------------+
- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
###3. V-USB connection
+---+ +---------------+
USB GND | | ATmega328p |
~~~ C3 | |
5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2
R1 | | ~~~~~~~~ ~~~~
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7)
D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10)
Z1 Z2 | PC3|------->ENABLE (12) (11)
GND<----+---+-----------|GND PB0|<-------KEY (4) (3)
| PB1|------->PREV (5) (4)
| |
GND+-C2--+--|XTAL1 RXD|------->Debug Console
X1 | TXD|<-------Debug Console
GND+-C3--+--|XTAL2 RST|---SW--+GND
+---------------+
R1: 1.5K Ohm
R2,R3: 68 Ohm
Z1,Z2: Zener 3.6V
C1,C2: 22pF
C3: 0.1uF
X1: Crystal 12MHz
SW: Push Switch(for bootloader)
- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
- NOTE: [USBaspLoader] is very useful for firmware update.
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
[V-USB]: http://www.obdev.at/products/vusb/index.html
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html