1
0
tmk_keyboard/tmk_core/protocol/chibios/README.md
2015-09-10 10:50:01 +01:00

3.4 KiB

TMK running on top of ChibiOS

Notes

  • To use, unpack or symlink ChibiOS {currently 3.0.1} to tmk_core/tool/chibios/chibios.
  • For gcc options, inspect tmk_core/tool/chibios/chibios.mk. For instance, I enabled -Wno-missing-field-initializers, because TMK common bits generated a lot of warnings on that. Also pay attention to -O0 (enabled for debugging); for deployment use -O2.
  • USB string descriptors are messy. I did not find a way to cleanly generate the right structures from actual strings, so the definitions in individual keyboards' config.h are ugly as heck.
  • There are some random constants left so far, e.g. 5ms sleep between calling keyboard_task, or 1.5sec wait for USB init, in main.c. There should be no such in usb_main.c (the main USB stack). Everything is based on timers/interrupts/kernel scheduling (well except keyboard_task), so no periodically called things (again, except keyboard_task, which is just how TMK is designed).
  • It is easy to add some code for testing (e.g. blink LED, do stuff on button press, etc...) - just create another thread in main.c, it will run independently of the keyboard business.
  • Jumping to bootloader works, but it is not entirely pleasant, since it is very much MCU dependent. The code is now geared towards STM32 chips and their built-in bootloaders. So, one needs to dig out the right address to jump to, and pass it to the compiler in the Makefile. Also, a patch to upstream ChibiOS is needed (supplied), because it ResetHandler needs adjusting.
  • Sleep LED works, but at the moment only on/off, i.e. no breathing.
  • The USB stack works pretty completely; however there are bits of other TMK stuff that are not done yet:

Immediate todo

  • host-wakeup packet sending during suspend
  • power saving for suspend?
  • PWM for sleep led

Not tested, but possibly working

  • backlight

Missing / not working (TMK vs ChibiOS bits)

  • eeprom / bootmagic (will be chip dependent; eeprom needs to be emulated in flash, which means less writes; wear-levelling?) There is a semi-official ST "driver" for eeprom, with wear-levelling, but I think it consumes a lot of RAM (like 2 pages, i.e. 1kB or so).

Tried with

  • ChibiOS 3.0.1 and ST F072RB DISCOVERY board.
  • Need to test on other STM32 chips (F3, F4) to make it as much chip-independent as possible.

STM32-based keyboard design considerations

  • STM32F0x2 chips can do crystal-less USB, but they still need a 3.3V voltage regulator.
  • The BOOT0 pin should be tied to GND.
  • For a hardware way of accessing the in-built DFU bootloader, in addition to the reset button, put another button between the BOOT0 pin and 3V3.
  • For breathing the caps lock LED during the suspended state ("sleep LED"), it is desirable to have that LED on a hardware PWM pin (there's usually plenty of those, look for TIMERs in the datasheet).

ChibiOS-supported MCUs (as of 3.0.1)

  • Pretty much all STM32 chips.
  • There is also support for AVR8, but the USB stack is not implemented for them yet, and also the kernel itself takes about 1k of RAM. I think people managed to get ChibiOS running on atmega32[8p/u4] though.
  • There is some support for K20 and KL25 Freescale chips (i.e. Teensy 3.0, mchck, FRDM-KL25Z, FRDM-K20D50M), but again, no USB stack yet.
  • I've seen community support for Nordic NRF51822 (the chip in Adafruit's Bluefruit bluetooth-low-energy boards), but not sure about the extent.